Yea would be interesting to see how it performs (read: how it kills everyone else) on Mark2001 lobbys :D
Think you have the time to show us some Mark2001/Sandra/PCmark action with that mean CPU? :)
Printable View
Yea would be interesting to see how it performs (read: how it kills everyone else) on Mark2001 lobbys :D
Think you have the time to show us some Mark2001/Sandra/PCmark action with that mean CPU? :)
Hey Kenneth, here is a before and after shot of your new computer room ! lol (10 points for anyone that knows who's room the after shot is !)
Bowmans right? 10pts should be worth a 3.0... Ill email you my address.....
Nice oc kenneth... cant wait to see some 3dmark01 benchies with that badboy...
Woww!!! Very incredible Kenneth !
Congratulations too :toast:
With my 2.4C (good 2.4) and Prometeia(no mod) I succeed to work with all the bench (included 3d 2k1 and 2k3) 330x12.. King 3500 3:2 2-5-2-2 Vcore default,Vmem 3.0v. NB stock cooling!
Over 330Mhz fsb I have some problem with 3dmark ..(only 3D)
I do not believe that the problem is the processor..Maybe is the NB that beyond a sure frequency it loses stability..
I have tried to vary the voltages and setting DDR but I have not resolved :rolleyes:
Sorry for my bad inglish :D
Thanks,
When i get back today, im guna see what fbs i can run benches at, sure isnt guna happen at 366 heh, i think i could run sandra at 360 if i remember right, ill give it a shot later.
That is a nice board. I am wondering if I should get one
Quote:
Originally posted by KennethChong
Thanks,
When i get back today, im guna see what fbs i can run benches at, sure isnt guna happen at 366 heh, i think i could run sandra at 360 if i remember right, ill give it a shot later.
Please answer this :) what dividers for over 330-350fsb and do you run fine, ratio 3:2 ?? what vmem & vcore etc... send me a Pm please.. soon i get Abit Max 3 board self :D iam still on 330fsb with Abit Ic7-G i875pe chips :( it´s so bored
:banana: and cheers to you
Congrats !!!
3/2 is what im using right now, i want to have some fun with 1:1 and see what this ram can do a bit later. I have 3.2 to the ram, stock core voltage.Quote:
Originally posted by PytonOrm
Please answer this :) what dividers for over 330-350fsb and do you run fine, ratio 3:2 ?? what vmem & vcore etc...
With that burn-in method.... all cooling off I've only managed 50C in Windows......I think my heatsink is too good.
yea, its really ment for waterchillers or phase change.
I was gonna say, I had so many programs running and it still wouldn't bump over 50C...... oh well I guess
try CPUBURN yet? ;)
Kenneth, it would be interesting to see what your 1M Super PI time is @ 360+ FSB.
Macci, what is your 1M Super PI time?
Edit: Macci....just found yours. 34 sec. :eek:
I often see errors at or above 305FSB such as; sysconfig is currupted or missing I've been told to get beyond 330FSB one must use Windows 2000, what OS are you using?
I've also noticed the Northwood-D overclocks to max on default vcore, and adding voltage doesn't really seem to effect the chip. It's either a great overclocker or not. I must say given the multipler, I'm shocked at your score, it's simply amazing. Usually only 3.2C's can reach that speed because the higher multi allows it to circumvent the chipset, and system bottlenecks. What HDD are you using and besides locking PCI/AGP and 3:2 what adjustments in BIOS did you make to avoid HDD/driver corruption?
There are times I can post up to 4GHz, but the Windows splash screen fails to load. You'll hear the post beep, it'll run through until Windows should be loaing, then nothing just blacknress? but then there are times when attempting to run in 1;1 270FSB the system will give me the errors I highlighted in blue above? If the PCI/AGP is locked, i guess this has nothing to do with IDE or SATA drives right?
I'm completely blown away your NB is giving these FSB speeds. In my honest opinion i beleive were all focusing on the wrong culprit. I beleive what you have is an extrodinary NB-MCH, not an extrodinary CPU. because both my 2.4C's Malay will easily overclock to 3.6GHz using 1.525V, and the temps are between 34C to 36C. If the chips had no more headroom I'd be pumping voltage into them, and they be running much hotter. therefore it's usually the NB, HDD, and/or OS which limits my overclocking. I'm certainly not trying to minimize how great of a CPU you have, I just happen to believe these Malay 2.4C's are simply great overclockers for the same reason most chips overclock. Their all made using the same set of templates, and photomasks, it's just a matter of locking the multiplier for each particular model.
using xp, no problems.Quote:
Originally posted by Liquid3D
I often see errors at or above 305FSB such as; sysconfig is currupted or missing I've been told to get beyond 330FSB one must use Windows 2000, what OS are you using?
im using an 40gb WD drive. Ive never really had any problems with coruption, i dont think macci did either, (correct me if im wrong)Quote:
Originally posted by Liquid3D
I've also noticed the Northwood-D overclocks to max on default vcore, and adding voltage doesn't really seem to effect the chip. It's either a great overclocker or not. I must say given the multipler, I'm shocked at your score, it's simply amazing. Usually only 3.2C's can reach that speed because the higher multi allows it to circumvent the chipset, and system bottlenecks. What HDD are you using and besides locking PCI/AGP and 3:2 what adjustments in BIOS did you make to avoid HDD/driver corruption?
i woudnt think so, sometimes i will get weird errors with diffrent combinations, i dont really think its a problem with IDE.Quote:
Originally posted by Liquid3D
There are times I can post up to 4GHz, but the Windows splash screen fails to load. You'll hear the post beep, it'll run through until Windows should be loaing, then nothing just blacknress? but then there are times when attempting to run in 1;1 270FSB the system will give me the errors I highlighted in blue above? If the PCI/AGP is locked, i guess this has nothing to do with IDE or SATA drives right?
well i tried 2 other 2.4's on here before i got the offer about this cpu, both would do around 3.7-3.8, at first i blamed it on the waterchiller, but i still would think i should be getting lower temps with sup freezing temps period, but i didnt have any problems with this one.Quote:
Originally posted by Liquid3D
I'm completely blown away your NB is giving these FSB speeds. In my honest opinion i beleive were all focusing on the wrong culprit. I beleive what you have is an extrodinary NB-MCH, not an extrodinary CPU. because both my 2.4C's Malay will easily overclock to 3.6GHz using 1.525V, and the temps are between 34C to 36C. If the chips had no more headroom I'd be pumping voltage into them, and they be running much hotter. therefore it's usually the NB, HDD, and/or OS which limits my overclocking. I'm certainly not trying to minimize how great of a CPU you have, I just happen to believe these Malay 2.4C's are simply great overclockers for the same reason most chips overclock. Their all made using the same set of templates, and photomasks, it's just a matter of locking the multiplier for each particular model.
but am i correct in understanding that you think the nb itself is a uniquely good overclocker?
kenneth can you check your winxp event viewer and see if you have any 'Application popup' or 'Machine check' messages ?
This may sound somewhat silly, but maybe if you have a "spare" vapo, or prometia, you could try putting that on the northbride, because even though it doesn't seem to need cooling, supercooling, might help the electron flow ;)
oh yea, nice 2.4 :D :D
Dont seem to have any.Quote:
Originally posted by eva2000
kenneth can you check your winxp event viewer and see if you have any 'Application popup' or 'Machine check' messages ?
The nb is on a diy phase change system, i think thats really what helped me get the extra mhz.
your on the front page of XS now!
oh wow :D its an honor :D thanks opp!
good to hear.. just be careful once you see those application pop machine_check exception errors you can pretty much kiss your cpu good bye (of course it could be other hardware going down)Quote:
Originally posted by KennethChong
Dont seem to have any.
The nb is on a diy phase change system, i think thats really what helped me get the extra mhz.
ms kb article here
oh wow, thats an intresting read thanks for the link, never heard of that before.
Excelent OC Kenneth I havnt read a hole thread in a long time but this one just kept my intrest going. Keep up the good work and hope you get that world record.
thanks, im still on the look out for that little boost that will get me over, im letting it sit 100% load to hopefully settle in the past more, that may help a little.
Kenneth,
Could you post more info about that chiller of yours? Pics?
TIA,
JD
Congrats on your awesome oc !
About the cpu burn in method, my 2.4C is now at 80° C, how long should i keep it running at 80° C ?
boy o boy, major oc :banana:
I let it run about a miunute, shut it off for a few, then let it get up there again for about a minute. Just pick a number you dont want it to get past and shut it off when i hits it a few times.Quote:
Originally posted by NapalmV5
Congrats on your awesome oc !
About the cpu burn in method, my 2.4C is now at 80° C, how long should i keep it running at 80° C ?
Ill be sure to post some pics when the gf gets back with the digi cam, have to show of my new work room aslo :DQuote:
Originally posted by uclajd
Kenneth,
Could you post more info about that chiller of yours? Pics?
TIA,
JD
Yes that's what I believe, that you have an exceptionally great NB. Be honest though, I don't know anymore. Pertaining to the bottlenecks I seem to get stuck in; some tell me it's WindowsXP, some tell me it's my NB, some my HDD, some memory. It seems I have all the right ingredients, but the cake batter keeps "falling".
Perhaps it is just luck of the draw with CPU's, I just don't know anymore. I do know I have a Prometeia still sitting here waiting to be RMA'd. I like to think overclocking is not all in the luck of the draw. I'd like to think thjat to a large extent your results are dependent upon your knowledge (which I don't claim to have in abundance, but I'd like to think I put my time in). Somebody wuvs me cause I just received a 2.8C Malay L323A832 08/21/2003, we'll see where she takes me.
Thanx KC.Quote:
Originally posted by KennethChong
I let it run about a miunute, shut it off for a few, then let it get up there again for about a minute. Just pick a number you dont want it to get past and shut it off when i hits it a few times.
Simply amazing:toast:
hail 2 the king
:YIPPIE:
MANN...!!!!...this is exciting.....seen alot good 2,4 OC:s lately.
This gives me high hopes...to my Mach II(got it to day)...and my 2,4 that´ll hopefully arriwe on Monday.
One thing thou that corsses my mind is...thoes this "burnin" method work on AS3 to?...or is it just Cheramice?.....anyone tried it..??
Kenneth; What brand of Cheramice do you use...???
i use artic silver ceramique, yes it works for any thermal past.
gl with it!Quote:
Originally posted by Liquid3D
Yes that's what I believe, that you have an exceptionally great NB. Be honest though, I don't know anymore. Pertaining to the bottlenecks I seem to get stuck in; some tell me it's WindowsXP, some tell me it's my NB, some my HDD, some memory. It seems I have all the right ingredients, but the cake batter keeps "falling".
Perhaps it is just luck of the draw with CPU's, I just don't know anymore. I do know I have a Prometeia still sitting here waiting to be RMA'd. I like to think overclocking is not all in the luck of the draw. I'd like to think thjat to a large extent your results are dependent upon your knowledge (which I don't claim to have in abundance, but I'd like to think I put my time in). Somebody wuvs me cause I just received a 2.8C Malay L323A832 08/21/2003, we'll see where she takes me.
I still belive you have to get a good chip, and that its luck of the draw most of the time, but its just one piece of the puzzle so to speak. Have to have all the pieces right, and have a bit of luck IMO.
Well thanx for replying. I've tried emulating other people's system to the letter, and I've tried building my own. Of course funds are important as well, and even though it's not all there is to it, lets face it; with a Prommie MachII, P4 3.2C, Asus P4C800-E, 1GB of Kingston Hyper-X3500, WD SCSI HDD, MSI 5900 Ultra, Swiftech H20 NB/GPU-Pelt kit, TTGI 550TS 4-fan PSU, and Lite-On LDW401 CD/DVD-RW, throw it all in a Clear PLexi or Lian Li case, and life would be slightly more interesting.
Then again placing solid silver heatsinks on the CPU, NB, Mosfets, SB, Memory, Videocard, and submerging it into a -40C bath of 3M Flourinert FC-43 in a watertight reach-down freezer, would be more then pure luck, it be madnessss.
I guess it's all relative, and depends what you compare it to. After all, I'm very lucky I have two 2.4C's that OC to 3.6GHz on default voltage, and run colder then an Eskimo's nose. And even though it has to be RMA'd at least I have a Prometeia. SO I do feel very fortunate. But one day I'd like to be at the top, with the "Big Boys" hehe.
:YIPPIE:
Fantastic results. Congratulations.
:D really impressive,
gratz, Kenneth,
im gonna get me a prommie or really good waterchiller, after i return from Asia trip in winter, :) need the money 4 the trip...
BTW, do u think the new 2.4 SL6Z3 stepping, M0, manufactured in Malay and with lowest stockvoltage 1,475 could b as good as ur 2.4C ?
Maybe i have the opportunity to get 1 of those;)
then im gonna OC like a mad &/$/&$ O N A I R :D :banana:
Jayray I would definately grab one of those!! If the default is listed as 1.475 MY GOD I'm willing to bet it's the best overclocker in the line-up! Where did you see it? Please send me the link!
The new P4 SL6Z (2.4 and 2.6C) are listed as 1.525v, no change :mad:Quote:
Originally posted by Liquid3D
Jayray I would definately grab one of those!! If the default is listed as 1.475 MY GOD I'm willing to bet it's the best overclocker in the line-up! Where did you see it? Please send me the link!
that's by design my friend :)Quote:
Originally posted by KennethChong
somehow i cant post an attatchment on my first post for some reason .
vB 3.0 will fix this
nice overclock, mighty 2.4C power
hey Kenneth tell me about your motherboard I just orderd one And would like to know If It Is as good As I think It will be.
Abit IC7max3
:banana:Quote:
The new P4 SL6Z (2.4 and 2.6C) are listed as 1.525v, no change
not true, i looked 4 the specifications and there note says: multiple vid´s
doesn´t that mean, that the vcore differs?
u r not sure, me neither :D :p:Quote:
Originally posted by jayray580
:banana:
not true, i looked 4 the specifications and there note says: multiple vid´s
doesn´t that mean, that the vcore differs?
Congratulations! Impressive results!!!Quote:
Originally posted by KennethChong
after about an hour of messing around this seems to be the highest i can get a screeny, sooo close!
But in this shot, it says 1,488 vcore... is it a CPU-Z error? What is the real vcore at that impressive freq? And the temps?
Bye :slobber:
Oh, :) , sry, i am quite sure, :D :toast:Quote:
u r not sure, me neither
Kenneth, what are the specs on your chip (FPO/batch, pack date, etc.)?
i suppose its a bug, it was at 1.5v, temps on cpu were -39, nb was -20Quote:
Originally posted by Diablo II
Congratulations! Impressive results!!!
But in this shot, it says 1,488 vcore... is it a CPU-Z error? What is the real vcore at that impressive freq? And the temps?
Bye :slobber:
as ive said, didnt get a box, but ill take a pic of it when i take it out of the prommie, one thing though, people are seeming to think this is a newer chip, its not, it was purchased the first month they came out.Quote:
Originally posted by [SLC]Tachyon
Kenneth, what are the specs on your chip (FPO/batch, pack date, etc.)?
incredible, do you have another board you can test it in? like a IS7? maybe liquid could be right but i think you do have a really nice board and chip and even ram
That's coollll........Any screenies yet from S-Sandra Arithmetic and PCMark-3DMark???....... :)
@hipro
hiho, do u have any new news about IS7- E bios, or is the official version No. 16 all we can get 4 now ?
hmmmmm..... 43xx mhz at 1,5V? It's quite too impossible even to think without ln2 or dryice at least.... post new proves and we would be more happy :) :toast:Quote:
Originally posted by KennethChong
i suppose its a bug, it was at 1.5v, temps on cpu were -39, nb was -20
seven pages and not a single benchmark result?? whats up with that?
With calm :DQuote:
Originally posted by macci
seven pages and not a single benchmark result?? whats up with that?
Really strange... With a cpu like that, impressive frequencies at so low vcore on simple phase change cooling... It should be quite simple to power the system and get the same result again for taking more screenies and benchies... let's wait ...Quote:
Originally posted by macci
seven pages and not a single benchmark result?? whats up with that?
Not yet....In a few days......Just wait....... ;)Quote:
Originally posted by jayray580
@hipro
hiho, do u have any new news about IS7- E bios, or is the official version No. 16 all we can get 4 now ?
looks like someones getting impatientQuote:
Originally posted by macci
seven pages and not a single benchmark result?? whats up with that?
Didn't you to have 2.4c at just about the same speeds? I can't imagine there being to much of a difference between your rig & his.
not impatient, ;) , just curious !!!
not impatient, ;) , just curious !!!Quote:
Originally posted by jayray580
not impatient, ;) , just curious !!!
not impatient, ;) , just curious !!!
not impatient, ;) , just curious !!!
:D :toast: ;)
woa there kiddies, its been really busy over here, havnt had much time to mess with it, but i ran a sandra just for yall, the highest speed i could manage for sandra was about 4.0, I might try and see what i can get with 1:1 when i get some more time.
i have quite a bit to do sometimes, just keep your pants on and ill get to it :)
as ive said, the v-core doesnt seem to matter with this chip, ive tried up to 1.8 with no diffrance besides higher temps.Quote:
Originally posted by Diablo II
hmmmmm..... 43xx mhz at 1,5V? It's quite too impossible even to think without ln2 or dryice at least.... post new proves and we would be more happy :) :toast:
Damnit!Quote:
Originally posted by KennethChong
i have quite a bit to do sometimes, just keep your pants on and ill get to it :)
*ziiip*
Nice response there. :D
Hell yes I'm getting impatient :DQuote:
looks like someones getting impatient
Didn't you to have 2.4c at just about the same speeds? I can't imagine there being to much of a difference between your rig & his.
There is one big difference in our rigs: I got my highest 2.4C clocks using a very slow Albatron mobo (with very slow albatron bios, this and supercooling on NB made it possible to hit the FSB speeds I hit) and Mr. Chong is doing the same FSBs with quite a bit faster IC7-max3 mobo. So I'd really like to see how it performs.
Yes lets see some benchies :slobber: chong seems to have the time to reply back to this forum.
and show the hole pic of the bench mark not just the top w/the bottom cut off that could have been run at any speed or someone elses far as that goes
Woof.
Dude just go back in this thread and look at his benchies!
He is for REAL !
I think that he must have a great CPU and was smart when putting his system together .
IE he chose the right parts.
I'd like to see pcmark
im confused , i get 11,300 on sandra at 3.5ghz
is that with HT disabled?
Which benchies???.....Only "half" of IT you mean of caurce.......Don't you??? ;)Quote:
Originally posted by gordos1
Dude just go back in this thread and look at his benchies!
He is for REAL !
Yeap......Me too...... :DQuote:
Originally posted by Amoeba Assassin
I'd like to see pcmark
NO......It's WITH HT ENABLE........I get about 11000 at 4200MHz with HT Disable....... ;)Quote:
Originally posted by Peen
is that with HT disabled?
Hmm, I assumed it was with HT off as well since with my 2.4C at 3.9 GHz I score 12000 ALU and 3381/7560 FPU/SSE2 with HT enabled.
http://members.lycos.co.uk/csmo/Comp...2.4C/CPU_2.gif
As ive said, ive been busy, i finaly asked my gf of 4 years to marry me, the house is in a clutter right now as were getting ready to go down to florda next week for the marrage/ honey moon, but as soon as stuff calms down over here ill be sure to take a pic of the chip, and run some benches for ya by the end of this week. untill then, im not guna be in much.
sorry for leaving all these questions unanswerd, ill be sure to get to them when i have some more time for this sort of thing, untill then, there are more important things.
NO.......Wrong again.........Take a look at 4200MHz with HT DISABLE......... :D
OR........in the other hand, he got lucky with ALU's....... :D
Anyways......a PCMark2002 would be good........ ;)
Congradulations Kenneth:)
Welcome to the hell known as marriage:D
Just kidding Have a blast in life with your new bride:toast:
also, congrats Kenneth, have a g(o)od(ly) time, all the best:toast:
What are you guys saying !??? congrats !??? you must have never been married b4 ! lol
STOP ! DON'T DO IT ! RUN AWAY !!! SEEK PROFESSIONAL HELP !
I agree don't do it, RUN while you can. done did it twice as if the 1st time I didn't learn my leason. Remember this devorsed once and it'll put you out on your own, Twice I'll put you back at home with your parents.
-.-:stick:
:eek:Quote:
Originally posted by KennethChong
As ive said, ive been busy, i finaly asked my gf of 4 years to marry me
hehe, That's a good enough reason for late benchies in my book.
Good luck buddy!
:banana:
Quote:
Originally posted by hipro5
NO.......Wrong again.........Take a look at 4200MHz with HT DISABLE......... :D
OR........in the other hand, he got lucky with ALU's....... :D
Anyways......a PCMark2002 would be good........ ;)
:) mine, but this is old i got from first try when i buy it from local store...
http://w1.565.telia.com/~u56506172/Score.jpg
and
http://w1.565.telia.com/~u56506172/score2.jpg
not so bad with lower mhz
Hehehe......Guys,take a look at a friend's of mine screenshot........He is crazy man(my friend)!!!!....... :D
Twice here too ! But you never know, maybe he's doing the right thing !Quote:
Originally posted by cowpuppy
I agree don't do it, RUN while you can. done did it twice as if the 1st time I didn't learn my leason. Remember this devorsed once and it'll put you out on your own, Twice I'll put you back at home with your parents.
wow! impressive results!!! At only 0,6V!!!Quote:
Originally posted by hipro5
Hehehe......Guys,take a look at a friend's of mine screenshot........He is crazy man(my friend)!!!!....... :D
:slobber: :slobber: :slobber:
...........
:D
@diabloII
:D
well seen, my friend, 0.6 volts, hmhm, what could that mean?
do we all simply use the wrong cpus or mobos??
:D
or is the little god of fake playing a nice game???:stick:
;) ;)
I think the "Everybody ownz Adobe" was probably a bit of a giveaway too.
:D
man i was just kiddin' :toast:Quote:
Originally posted by jayray580
@diabloII
:D
well seen, my friend, 0.6 volts, hmhm, what could that mean?
do we all simply use the wrong cpus or mobos??
:D
or is the little god of fake playing a nice game???:stick:
;) ;)
Why do people do this? Doesn't it call into question everything? I'm working my arse off trying to keep up with "fake" benchmarks? 375FSB, that's not like Precious, is it.
:smileysex
What gets me is why are all the fakes so badly done?
Ten minutes with Photoshop and I could come up a perfect fake CPU-Z shot.
But then again, I have morals...
:D :D :D :banana: :toast:
lol 8-)
Yeah Faked :DQuote:
Originally posted by hipro5
Hehehe......Guys,take a look at a friend's of mine screenshot........He is crazy man(my friend)!!!!....... :D
The BEST of all is a screenshot of the screen with a digicam.......... ;)
Better proof, but still photochoppable 8-)Quote:
Originally posted by hipro5
The BEST of all is a screenshot of the screen with a digicam.......... ;)
as best proof, it is enough, you cant ask nothing more man ;)Quote:
Originally posted by STEvil
Better proof, but still photochoppable 8-)
C'mon guys, what's the point of all these.... you can finish your photochop project and then take a photo of the screen...
Maybe we shall give a go with a video capture of the whole procedure, from the begining of the benchmarks to the end, lol....
Always there will be ppl fooling around to get some attention, but sooner or later they'll get caught.
lol hipro
Well ya ask me it's a waste of bandwidth, and I for one am perturbed, because it takes more serious forms, like the possibility a team was cheating on Folding Stat's some time ago. I'll have to send my little friend in my avatar to their address :eek:
hehe, I was just going to mention your new avatar, that you Liquid?
:D
I might actually fake me a CPU-Z shot, just to show 'em how it's done. :D