It looks better finished then MIPS, we did the right choice! :yepp:Quote:
Originally Posted by Griff
Printable View
It looks better finished then MIPS, we did the right choice! :yepp:Quote:
Originally Posted by Griff
It's cool. I gotta get a NB block still.
But since I haven't ordered yet, now is the best time to ask (Since I didn't before :brick: ) - do these come with barbs? If not, I'll get an extra set ordered with my NB block. :toast:
can you please take a picture of the bottom?
No barbs Ski they ordered separately.Quote:
Originally Posted by t_ski
Thanks. G1/4, right?
Yes:Quote:
Originally Posted by t_ski
Technische Daten:
Material: Elektrolyt-Kupfer
Abmaße (Block groß): (LxBxH) 59,0 x 15,5 x 14,5mm
Abmaße (Block klein): (LxBxH) 35,0 x 15,5 x 14,5mm
Gewicht komplett: ca. 90g
Druckgetestet: 5 bar
Dichtung: NBR 70 (max. 120°C)
Anschluss: G ¼ Zoll (DIN ISO 228-1)
Thanks. I'm trying to finish up a project for school ATM, and was hoping to get this stuff ordered when I'm done (if it's not too late tonight :( )...
Just to let everybody know that I just got the blocks in the mail :up:
Gonna open the box to inspect everything and start shipping to you guys.
I will use address given by Paypal shipping costs inside US must be $3 or under I will send exact amount once I drive by any USPS office. :clap:
Shouldn't have told me. Now that I know it's in US the anticipation is going to kill me!!!
They look stunning and they all arrived in good shape:
for the ones who likes more the darker tops :) ^^ (or acrylic version)
http://666kb.com/i/avxy4zu3tl6j99rmq.jpg
Anfi DFI LANparty P35/X38/X48-T2/3R pwm block
removeable betweenplate (cpl coolingplate)
http://666kb.com/i/avxy4xb2ofbxag7qa.jpg
german quality too :D
http://anfi-tec.de/forenbilder/08.05.04/2.JPG
I see one with my name on it... Ba ha haahhhahahhaha
http://www.xtremesystems.org/forums/...1&d=1210557334
Hey Guys,
Back from Postal Office heres the domestic shipping costs:
-4 ounces is the weight-
Priority Mail US$4.80 2-3days
First Class US$1.35 3 days
Choose the desired method and send payment + $1.50 small bubbled envelope + 5% Paypal transfer tax to jor3llbr@gmail.com
Should be something like this (total) US$ 6.62 for Priorityy or US$ 3.35 for First Class.
* Except for Boyu that want this shipped differently!
Best Regards!
jor3lBr : dtek fuzion/EK barb fit n seal perfectly right?, doesn't have to use EK ring spacer right?.
Yeah they do. I would recommend a white tape + o-ring (you never can be careful enough with watercooling), but the o-ring makes a perfect seal too.Quote:
Originally Posted by Boyu
Domestic Shipping:
Quote:
Originally Posted by Jor3lBR
payment sent,thx
payment sent for Priority
sent
priority.... wahooo
I guess you could use any NB/SB, however I would have really liked to get the DFI kit...
I sent them a message via their website in English and broken German, do they usually respond?
Everything shipped yesterday (besides Woz that I shipped today).
I followed all instructions requested by some in pm.
Hopefully most of you guys will receive their block Thursday and others till Saturday.
Give me some feedback when they arrive :up:
Got mine today. Thanks for all the work you did to bring these to us.
Cool, Thanks for going through all of this! Hopefully within a couple months I can finish my build. Which reminds me, I should probably start buying stuff soon.
Hehe, cheers on the group buy, and good luck with the blocks.
One thing though, Vcore.dk isn't a German shop, it's Danish :p:
See the .DK suffix? DK signifies DenmarK.
The waterblocks, Heatkiller and MIPS, are german indeed, but the shop isn't :p:
Sorry for the delay buddy! It's been so busy @ the office, teaching a new guy some SQL queries and also VB Scripts.. Anyway the funds have been sent via PAYPAL.. I know you listed $6 beans & change SO I sent $7 beans even... LMK when that sexy piece of copper P_o_RM ships out...
***Sending to my office so it's probably gonna be cheaper since business addresses are cheaper then residential... THANX AGAIN!!!
BRY
************************************************** **********
Transfer to: Elano Sales
Total Amount: -$7.00 USD
Date: May 15, 2008
Time: 21:34:25 PDT
Status: Completed
Subject:
GROUP BUY-SW-16 from Watercool.de and vcore Mosfet Freezer DFI (Motherboards!!!!
************************************************** **************
THANX AGAIN BRO!!!!
This is for USPS Priority Mail shipping to my office. Item was already paid and received/processed by: seller/fellow http://www.xtremesystems.org/forums/...=182949&page=5!
member!
Hey Guys,Back from Postal Office heres the domestic shipping costs:-4 ounces is the weight-Priority Mail US$4.80 2-3days First Class US$1.35 3 days
Choose the desired method and send payment + $1.50 small bubbled envelope + 5% Paypal transfer tax to xxxxxxx@gmail.com Should be something like this (total) US$ 6.62 for Priorityy or US$ 3.35 for First Class.
* Except for Boyu that want this shipped differently!
Funding Type: Instant Transfer
Funding Source: $7.00 USD - First Union Checking (Confirmed)
:shocked: :up: :up: :up: :up: :up::shocked:
the Eagle has landed, thanks for going thru all that effort!
it looks great, i am very happy!
:up:
Quote:
Originally Posted by sickboy8820
No problem Brian, I already sent your's on Wednesday:
Search Results
Label/Receipt Number: 9101 1288 8230 0282 3871 57
Status: Processed
Your item was processed and left our KEARNY, NJ 07032 facility on May 15, 2008. Information, if available, is updated every evening. Please check again later.
Quote:
Originally Posted by mrlader
Glag to hear that guys :up:Quote:
Originally Posted by systemviper
Thanks for your trust and I knew I could pull this off :up::up::up: :ROTF:
@jor3lbr : mine arrivied today end will be ship to me along with other stuff i order,
thx you for your time for doing this bulk order for us.
Jor3lBR, I got mine yesterday. Do you have a heatware account I can post feedback on? I missed it if it was in this thread.
Quote:
Originally Posted by t_ski
Hey guys!Quote:
Originally Posted by Boyu
Glad to hear that! Please post your temp results as I'm still waiting on phase change unit to rebuild machine.
I don't have heatware :-( only eBay account, but thats all good ski, my goal was achieved anyways!
Jor3lBR, I got mine yesterday. THANX BRO!!!
1st Run: 41/43 C running Prime for 16 hrs Max'D!
And now 34/36 C same situation... Same ambient guys!
It's only 1 run so far BUT 5-9 C degrees lower.... Gonna play around with some voltage now since it's W/C!
Nicest piece of copper I've seen... Cost an arm and a leg BUT well worth it!
Sick Boy....
Is there a chance of there being another group buy of these? I didn't know about this thread until it was too late. :( I'm planning on beefing up the water cooling on my p35 and I would really like one of these blocks. If people are interested I would take the responsibility of ordering more.
Got mine installed today. Seeing 36 at idle 41 at load after 3hr. Sorry the pic isn't very good. I'll try to get another one later.
http://img182.imageshack.us/img182/5297/p1010009bq0.jpg
And one of the whole thing. Haven't done the cable management yet so don't give me any crap about it!!!
http://img385.imageshack.us/img385/4632/p1010011ls3.jpg
I just received mine (direct from Germany since I live in the UK, but it still cost 15 GB pounds for delivery :eek:) but haven't installed it yet. I am curious about the thermal interface material they provide. Any idea what it is? Presumably there are 2 different thickness since the mosfets are of a different height to the other SM components. Easier than milling a step in the base of the block I guess.Quote:
Originally Posted by mrlader
:)
saint-francis, YGPMQuote:
Originally Posted by saint-francis
:rofl::rofl:Quote:
Originally Posted by mrlader
:up: nice build..... I like
Been there, still doing that.....
http://www.ezstables.com/sv/mm1i.jpg
http://www.ezstables.com/sv/mm1.jpg
http://www.ezstables.com/sv/mm1f.jpg
http://www.ezstables.com/sv/mm1e.jpg
http://www.ezstables.com/sv/mm1d.jpg
http://www.ezstables.com/sv/mm1c.jpg
http://www.ezstables.com/sv/mm1b.jpg
http://www.ezstables.com/sv/mm1a.jpg
http://www.ezstables.com/sv/mm1h.jpg
How do I get barbs for this thing? :confused: Will something like this fit? I have a loop with all 1/2" fittings and I don't want to screw around with adapters to change the size of tubing.
man that is one crazy looking case. yea, i hope the 1/2 " fittings work, but i pretty sure they should....
what's the final goal of that case, interesting design.
ps, are you using that hanger to help your back or is it just for some extreme workouts.
regards
steve
Yeah the case beats how I used to have the system just sitting on a pile of boards. :rofl: The wife thought it looked like hell so I decided to spruce it up a little bit and I made that shelf for it. The idea behind it is that it will cool better than having the system in a case (better air flow with less fans) and there is easy access. I have a 120 mm fan on the HDD's (which is nice). They are also suspended with rubber grommets so they are nearly silent and resistant to shock. I'm in the process of making a new one. All walnut. A big solid block that my 2 yr. old son can't screw with. I'm going to put it on the floor and put the heater cores and the pumps (I'm getting another one like I already have) in the basement right beneath it. I want to get as much of the heat from the system as I can into the basement where I don't care about noise. This is why I need to get the PWM water block; because my 80 mm fan I have on there now won't fit inside a case and it would create more hot air that would need to be evacuated. Also getting 2 more heater cores for a grand total of 4. The plan is for no noise to come from the system at all. And the inversion rack, well what can I say? It's plain awesome. If you ever get the chance to try one out you'll be hooked for life; just like I was. ;)
Back on topic:
Does the Swiftech MCW30 also use the same barbs? I think the specs said that it's 1/4' threads but I'm not sure. If so I'll pick up a couple more of those barbs for my MCW30 as the plastic ones it come with are pretty flimsy and I almost trashed one trying to put 7/16' tubing on.
I had a hard time getting my dtek barbs on. When I did they were leaking a little from the o ring. I used some EK high flow barbs instead as I've found that they tend to be threaded more consistently. The EKs went on very easy where as the dteks required a bit of elbow grease to get on.
Interesting. PTS is all out of the EK barbs. What barbs are other people using?
i don't want to ressurect threads, but do you have internal pics?
i want to know how restrictive that think is compared to EK blocks :up:
im interested if anyone wants to do another order...
BAH!
I've got my MIPS block in hand, it looks great but the guys over at DFI club told me it wasn't a good idea. I have another computer working right now so I'm willing to risk it. But now I'm seeing this heatkiller block and I WANTS IT. But I don't see any SW-16's on the vcore.dk website.
Any suggestions on how I can get one?
Well i decided to go ahead with the MIPS block and I think I'll be ok. I went ahead and purchased the whole motherboard set from them (cept for the APOGEE GTZ) and so I want it to be uniform.
I removed some of the heat issue by refraining from adding any thermal paste to the inductors and by putting down a very thin layer of E-tape. I'll let you guys know what happens =P.