Proc freq: 3324.9 MHz
Board : DFI DK P35
Memory : Crucial Ballistix Tracer
12.xx
http://www.abload.de/img/e8500_3225_12_59xp6.jpg
Printable View
Proc freq: 3324.9 MHz
Board : DFI DK P35
Memory : Crucial Ballistix Tracer
12.xx
http://www.abload.de/img/e8500_3225_12_59xp6.jpg
Time Zone: 8.XX
CPU Model: Intel Core 2 Extreme QX9650 rev C0
CPU Frequency: 5304.3MHz
RAM Type: DDR3
RAM Frequency: DDR3-1768
RAM Timings: 6-5-5-16 1T
SuperPi 32M Calculation Time: 8min 52s 718ms
http://www.benchzone.com/Benchmarkin...at_5304mhz.jpg
Time Zone: 14.XX
CPU Model: Intel Core 2 Duo E8400
CPU Frequency: 3002.1MHz
RAM Type: DDR3
RAM Frequency: DDR3-2000
RAM Timings: 8-7-6-21 1T
SuperPi 32M Calculation Time: 14min 53s 829ms
No tweaks at all...untweaked hardware, not tweaked windows installation, untweaked run ( no copywaza, maxmem, etc )
http://www.benchzone.com/Benchmarkin...dr2000_32m.jpg
wow almost 900MHz 6-5-5-x from those Cellshocks :shocked:
nice RAM man
what vdimm was that on?
~2.29V.Quote:
Originally Posted by dinos22
Guess what... they can do more than 900MHz 6-5-5-x SuperPi 32M & Memtest Error-Free ( 50 loops test #5 ).
Unfortunately the CPU is a dud for DI/LN2... :(
I had to settle down on clocks...
12.xx time zone:
e8400 @ 3.6ghz
ddr2 @ 600mhz 5-5-4-12
time: 12m 54.639sec
http://img211.imageshack.us/img211/4...ub13rr6.th.jpg
9.XX
E8400@4500
DDR3@1000 (7-6-6-16-1T)
time: 9m 53.640sec
Only basic tweaks.
http://keep4u.ru/imgs/b/080407/e4/e4...347389a293.jpg
Setup :
- C2D E8500@TRUE 120
- DFI BloodIron
- Crucial Ballistix PC8500@2.55v
- SilverStone st560f
10.xx
http://www.abload.de/img/e85004048mhz_sub11hhp.png
13.xx
http://www.abload.de/img/e85003030mhz_sub14ns9.png
:wave:
3oh6 m8, you've some errors in the lists.
The 13.xx time & 8.xx time by monteboy are linked to wrong posts/scores.
Edit:
The correct links:
8.xx time - http://www.abload.de/img/e8500_5190_8_591024xk5b.jpg
13.xx time - http://www.xtremesystems.org/forums/...&postcount=100
12.xx time zone:
http://www.abload.de/img/e85003324mhz_sub134av.png
Just for fun ... 36GP 12.xxx with Conroe 2Mb
http://img88.imageshack.us/img88/418...6400nz4.th.jpg
thanks for the heads up and leg work...will edit those with my next update in a bit.Quote:
Originally Posted by BenchZowner
so for those hating on the 790i because some guys have been posting results without P1/P2 enabled, let the hating stop, 790i is officially as fast in SPi (32M at least and really, thats all that counts :D )...it might not be as fast at the exact same settings, but, the memory clocking abilities put it ahead of P35/X38. i will be getting my X48 board in a week or so but i don't anticipate the memory clocking skill of the 790i.
here is the proof...now it doesn't register for anything, and it was a bit of a kick in the balls, but compare it to my 10.XX category leading frequency and you can see this setup is right there. BTW, i will have it in the 10.xx category at this frequency if it means not sleeping tonight...
E8400 (L746A381) 7.5 x 531 (boot at 513)
Thermalright Ultra-120 (CPU cooling)
EVGA 790i (vDROOP mod)
Corsair Dominator PC3-14400 (non-XMP)
HIS HD3870X2 (drivers not installed)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
ERAM v2.11 (simply for copying the CW to)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)
click for full size...
http://img.photobucket.com/albums/v2...t_ouch-1sm.png
now, the X48 i have on its way (P5E3-Premium) might be able to match this 531x7.5 1:2 at a nice tight PL, but my best P5K3-Dlx or Maximus Extreme sure as hell couldn't.
ho ho ho ho ho
what did i tell ya mate :D
wait till you get a kit of RAM than can handle tighter tRFC ;) :D
that's a great time mate
really great :up:
fingers crossed this new kit i'm getting will do some decent 7-6-x-x timings past 2GHz :D
thanks buddy and yes you were absolutely correct, thanks for your thread convincing me of taking a chance on this board. it will be doing what it was meant to do in a short while (mmm 3D benching) but it also holds its own in 32M SPi.Quote:
Originally Posted by dinos22
also, this kit will absolutely not do <65 tRFC at this frequency...at 1050MHz i got it to run 64 tRFC but 63 was a no-go. my other kit of Dominator 14400s didn't like tight tRFC in the Maximus Extreme either so i don't have high hopes for them on the 790i. my G.Skills were a bit better so if they clock like these Dom sticks then the G.Skills should pull this time down a bit more. speaking of which, before i could even finish my last post, the deed was done. 790i owns one of the top spots in the 32M challenge :up:
E8400 (L746A381) 7.5 x 531 (boot at 513)
Thermalright Ultra-120 (CPU Cooling)
EVGA 790i SLI Ultra
Noctua NC-U6 // HR-05-SLI (SPP & MCP cooling)
Corsair Dominator PC3-14400
HIS HD3870X2 (drivers not installed)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
ERAM v2.11 (just to transfer CW file to)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 615
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = default
plenty of services disabled but not all
3983.1MHz SPi 32M = 10m 59.969s
click for full size including memset...
http://img.photobucket.com/albums/v2...76_32m-1sm.png
i can run my corsair kit down to 54 tRFC
guess it all depends on the board and kits
i've seen a few people benchmark 7-7-7-x or 7-6-x-x- on 790i at 2GHz which is encouraging.............
i reckon it's just going to need some more bios tweakin by engineers but once CAS7 and CAS6 clocks get up to speed Superpi times will tumble even more....you would definitely beat your old score in this category with CAS7 imo
must be that special hand picked ES board you got :DQuote:
Originally Posted by dinos22
yeah, 2000MHz at CL7 will be interesting to see on the 790i. as it stands, 500*8 1:2 8-7-6 is a few seconds slower on 790i than P35 at the same with tRD6 and even a few more yet than X38 at 500*8 1:2 7-7-6 tRD6. so clock for clock it isn't as fast, unless maybe with some nice 54 tRFC ;) (thats jealousy talking).Quote:
Originally Posted by dinos22
but...where it will pull ahead is at high FSB where we are limited to pretty much a single ratio like P35/X38/X48. the ability to tune memory clocks a bit better at 550FSB+ should give it the advantage there...hopefully.
hahah ........ bastard :p: j/k :DQuote:
Originally Posted by 3oh6
hehe, did you even catch my low blow in that 790i OC Report over at the 'other' place? If not, check the bottom of the specs post :D all referencing the discussion that went on over here about your 790i board.Quote:
Originally Posted by dinos22
link? :D
alright before you post a hlaf dozen other scores :D...please start including the memory tab, motherboard tab, and if at all possible the SPD tab. it helps identify your components and helps others out. thanks guy, and damn...hardest working guy in this thread, nice work :up:
i will update sometime after 5pm tomorrow...last final that i have to think for should be done then ;)
^^ And disable SpeedStep as well ;)
who the what now? SpeedStep isn't on, he's benching at that multi.Quote:
Originally Posted by BenchZowner
Not this bench.Quote:
Originally Posted by 3oh6
Some of his benches.
10.xx time zone:
http://www.abload.de/img/e8500577x7sub11l86.png
@3oh6
great time@790i :up:
:wave:
far out man
PL=7 at 577MHz FSB :eek:
what cooling and voltage on NB?
what board is that?
:DQuote:
Originally Posted by dinos22
nb@1.82-1.9v and 120mm fan over stock cooler
DFI p35 Blood Iron (no mod)
nice NB :)
alright, update done...nice work guys :up:
here is my contribution...again, courtesy the EVGA 790i ;)
E8400 (L746A381) 6 x 546 (boot at 546)
Thermalright Ultra-120 (CPU Cooling)
EVGA 790i SLI Ultra (P03R2)
Noctua NC-U6 // HR-05-SLI (SPP & MCP cooling)
Corsair Dominator PC3-14400
HIS HD3870X2 (drivers not installed)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/programs/page file)
ERAM v2.11 (just to transfer CW file to)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 615
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = default
plenty of services disabled but not all
3277.3MHz SPi 32M = 12m 59.578s
click for full size including memset...
http://img.photobucket.com/albums/v2...6x_32m-1sm.png
i know Gautam wanted to see a lower frequency but this is the best i could muster out at this time. the memory is at the highest ratio before going to 1130MHz (which won't be happening anytime soon) and the OS is as tweaked as a base head on sunday morning. this 790i is a monster and these G.Skills are absolutely killing it...tRFC 56 @ 1060MHz...wait until you see them at the same timings at 1078MHz for 32M with only 2.10v :D
it feels good to join the sub 9min club on a single stage...and yeah, the CPU-Z voltage for the CPU is correct, i finally got lucky with a CPU ;)
E8400 (Q808A476) 9 x 565 (boot at 550*9)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Noctua NC-U6 // P5B-Dlx SB (SPP & MCP cooling)
G.Skill F3-12800CL7D-2GBHZ
Biostar 8600GTS(drivers not installed)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Ultra XPro 750W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
5085.4MHz SPi 32M = 8m 59.766s
click for full size including memset...
http://img.photobucket.com/albums/v2...7-6_32m-1s.png
Very nice! :clap:
very nice man
Just did some testing today and realised this falls nicely in the list. Not optimised, no maxmem, just closed all processes and ran pi. This was supposed to be some 1200 CL4 thingy.
Detailed parts ...
8400 Q810A076
Gigabyte EX38-DS4 v1.1
Tuniq Tower 120
Crucial Ballistix 2x1gb 8500
Xpertvision 9600GT
Verudium Vortex HE 600W
Vcore - 1.25v
Vdimm - 2.6V
Vmch - +0.4V - I'm assuming it's 1.8V.
Along with lots that i don't know.
http://i3.photobucket.com/albums/y76...lityOnline.jpg
Quote:
Originally Posted by Gautam
thanks guys...felt as good getting under 9 min as it did going under 10 min for the first time, you know whats next :DQuote:
Originally Posted by dinos22
now, more of the 790i killing it in 32M ;)
E8400 (Q808A476) 8 x 558 (boot at 550*8)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Noctua NC-U6 // P5B-Dlx SB (SPP & MCP cooling)
G.Skill F3-12800CL7D-2GBHZ
2x9800GTX (drivers not installed)
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Ultra XPro 750W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
4463.8MHz SPi 32M = 9m 59.828s
click for full size including memset...
http://img.photobucket.com/albums/v2...3_1046-1sm.png
nvidia... :rolleyes: gj 3oh6 :up:
Strike 3oh6:clap:
Your job on 790 is very nice
Quote:
Originally Posted by sobih25
thanks guys...this board has treated me extremely well. i just got a capable water setup on the north bridge and am working on crushing my overall PB 32M time. so far a solid 5 seconds lower than it was with a Noctua NC-U6 on the north bridge. i am hitting some resistance @ 580FSB / 1091MHZ 8-7-6 but working through it :up:Quote:
Originally Posted by gandalfone
lol guys have a look at this
CPU
FSB
and still such a nice time hey :D
http://img88.imageshack.us/img88/572...z10m56spl3.png
nowhere near as good as Jody but a start anyways
i'm really loving this new Gigabyte X48T-DQ6 with 1800MHz CAS7 Corsair Dominators :)
http://img528.imageshack.us/img528/7...181t32moo6.png
it's about time we got your name up there. i am looking forward to seeing what you can do with that board in this arena. i too have an x48 now, P5E3-Premium. it should be interesting to see if i can catch up to the 790i with it...something tells me it might be a tough fight to do so.
hehe
i don't know what's up with me
i always like to do things the hard way don't i
have a perfectly good 790i in the bench room and i'm messing with X38 and X48 boards :rofl::D
maybe it's a good challenge i guess
i will give this asus P5E3 DLX a shot again as i have some issues with Gigabyte X48 and i'm finding that asus is a few seconds quicker
i'll take it easy cause i make too many plans in my head and i find time is what i don't have hehehe
btw it's dinos22 or are you paying me back for calling ya Jodi :D
Try calling him Jodiah, and see what happens :p:Quote:
Originally Posted by dinos22
On-Topic:
Do you think I can beat my previous run @ 5.3G with the Striker II Extreme ? ( Note: I can't use 6-5-5-16, it's not stable for 32m even at "only" DDR3-1750 )
hey Jody
this asus ain't too shabby at all man
look what it's doing to my Corsair Dominators :D hehehe
http://img527.imageshack.us/img527/8...superpirt6.png
if i could get this ram to bench at CAS7 the board would let me run PL=6 but just cannot seem to pass about 970MHz 7-6-6-18 1T stable heh
Dinos incredible score....
11x
Asus maximus extreme
e8500 air
cellshock 1800
win2k3
Attachment 78767
10x
Attachment 78768
60MHz more on the memory gave a solid 45MHz drop in CPU frequency, wasn't expecting so much but i won't complain :up:
E8400 (Q808A476) 9 x 565 (boot at 525*9)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Swiftech MCW30/PA 120.2/DD5 // P5B-Dlx SB (SPP // MCP cooling)
Ballistix 2x1GB PC3-16000 CL9
Biostar 7600GS
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Ultra XPro 750W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
5040.7MHz SPi 32M = 8m 59.828s
click for full size including memset...
http://3oh6.com/forum_posted/reviews...7-6_1120-1.png
right back at ya mate ;)Quote:
Originally Posted by gandalfone
Jody you are soooooooooooo close to that illusive 5GHz mark for sub 9m run :up:
now are you going to make me call you Dinos22...or is Dino/Dinos good. come on, what the hell is your name anyway? :DQuote:
Originally Posted by dinos22
i managed sub 5GHz/sub 10min with 65nm but sub 5GHz/sub 9min is going to be much tougher. i'm not sure where i am going to get that 40MHz from. this 790i at this timing set is faster than the only reasonable higher FSB setup. i just don't see this 790i getting anymore that this...aside from a couple MHz for tighter secondary timings :shrug:
E8400 (Q808A476) 9 x 554 (boot at 525*9)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Swiftech MCW30/PA 120.2/DD5 // P5B-Dlx SB (SPP // MCP cooling)
Ballistix 2x1GB PC3-16000 CL9
Biostar 7600GS
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Ultra XPro 750W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
4432.6MHz SPi 32M = 9m 59.391s
click for full size including memset...
http://img.photobucket.com/albums/v2...2_1108-1sm.png
my name is DinoQuote:
Originally Posted by 3oh6
:)
yeah it looks like you've squeezed it all out
the only other thing i could think off is getting that tRFC lower and also going for 8.5x higher FSB with P1/P2 but that may be impossible unless subzero coolin on NB can help :shrug:
you've done really great
in fact some of your times are making me depressed considering how far behind i am on Intel platform atm.... lol
i have finally gotten around to do some Ghost images of a bench system so that i could potentially recover back in 10 minutes if required
i also have a dead hard drive which may have been cause by 790i...i cannot install an OS on it any more :shocked:
alright, Dino it is ;)Quote:
Originally Posted by dinos22
thanks for the comments...squeezing this 790i has all but consumed me these past few weeks but i think i am getting to its ultimate limits. time to up the CPU multi and take these results to the next level.
and damn...never thought of that for whatever reason. 8.5x588 is exactly 5GHz...and guess what my max 32M benching FSB is right now? that's right, 588MHz. i can run 588FSB with memory at 1102MHz...but i don't think that will get me sub 10min to be honest. i just just shut the rig down for the night but tomorrow i will give it a go with the G.Skills so i can run a tRFC of 58 at 1102MHz.
it is good to hear you have finally come around with an imaging setup, but damn, i don't want to hear you having issues with hard drives. as i said in the Ballistix OC Report...i haven't had to re-image in weeks. even with pushing these G.Skills and the Ballistix. i really think i have a good handle on this board. either that or i have beat it into submission :D
now...i am sooooooo close to sub 9min sub 5GHz :D
click for full size...
http://img.photobucket.com/albums/v2...6_1102-1sm.png
thanks for smacking me in the head and waking me up to the whole 8.5X multi. i can't believe i didn't think of that seeing as it equates to exactly 5GHz. i honestly didn't think it would be this close but it is almost worth fighting with for a few hours to see what i can't come up with. the only problem is that my SPi process is about as good as i am going to get it...i think. lord knows i have spent a lot of time on my process/OS. although i haven't really done a lot of changes to my CW since going 45nm...perhaps there are a couple seconds to gain there, but 3 and a half is going to be pretty tough at this point.
BTW, you do realize i have dropped 35 seconds going from 8.5X to 9X??? i hope your thinking what i am thinking about an E8500 and a certain world record :D :D
Awesome stuff Jody.. ya need a new 120MB/s SSD OS drive :D
gosh George, i don't know...that is an awfully generous offer of a donation, but i don't think i can accept :D
thanks buddy...i love love love this motherboard.
hmm it seems the 790i can supply a decent fsb. just wondering wich is the king..... 790i or 965c2 ( just for fsb )
anyways.... soo close, hope you can manage to sqeeuze a litte more out of it ;)
965C2 is still FSB king without question. my board is completely tapped at 590FSB right now with high volts and ambient cooled water. not many others have gotten this high or gone higher. but the difference in performance at this FSB VS 965C2 in SPi isn't going to be close :D
nice thnx for the info. thinking about getting a 790i
just do your research as to what you are getting into...it is a very fine tightrope with that board and a lot of people have nothing but problems.Quote:
Originally Posted by LyP0
Trying to squeeze something from a crippled setup...
http://img185.imageshack.us/img185/8...xxspi32is7.jpg
Time Zone: 17.xx
Actual Time: 17.59.266
Multiplier: 6 x 400
Proc Speed: 2400.09 MHz
Ram Type: DDR2
Ram Speed: 480.0 MHz
Ram Timings: 4-5-5-13
Divider: 5:6
Processor: Intel E3110
Chipset used: P35
validation: http://valid.x86-secret.com/show_oc.php?id=364744
full image: http://img519.imageshack.us/img519/2...1759266ga6.jpg
super fast!
-dumay
@dduckquack:
Thanks Dumay
Fafs, if only I have those monster mems than can do 600+ @ 4-4-4-4, this could have been faster.... ^_^
http://img382.imageshack.us/img382/5...25smallgl5.jpg
Quote:
Time Zone: 18.xx
Actual Time: 18.59.625
Multiplier: 6 x 375
Proc Speed: 2255.23 MHz
Ram Type: DDR2
Ram Speed: 451.0 MHz
Ram Timings: 4-4-5-13
Divider: 5:6
Processor: Intel E3110
Chipset used: P35
validation: http://valid.x86-secret.com/show_oc.php?id=365176
full image: http://img391.imageshack.us/img391/1...1859625pj7.jpg
:)
@jcmarfilph: nice run fafs! :up:
3rd lowest FSB sub 10min 32M entry :D
http://fileshosts.com/intel/Asus/Bli...9s703ms_tn.png
Just a quick run to verify my RAM's overclocking ok on this board :D
http://i30.tinypic.com/2jg57hw.jpg
I can easily get it under 11m at the same settings.
Will do...next week :)
lol nice to see 4xCPUz windows there :rofl:
oh f***
LOL :D
Congrats Bill :p:
New P5K3 Deluxe, the classic DDR3-1800 CellShock 2GB Kit D9GTR and teh silly bananeh ( aka QX9650 )
Nice move with the CPU-Z Bill :D
Apart from that, can you go higher with more vdimm?
I'd imagine 925mhz to be no problemo for you if you crank up the voltage a little...
This sunday, along with Oliver, I will try 1ghz 32M those latencies :) 4ghz sharp
Oh and 3950mhz as well, the 10.xxx entry needs to be made as well :D
- Initial Blackops preparation, for the 01SE/03/05/06 single card the following weekend... - Gotta make a fine little excel file with vdimm/vmch/freq/timings - so that it'll only be QX9650 concern the following week.
Yeah, they can do higher even at the same voltage.
I was just testing the exact timings I had from a previous test.
I'll test them again probably later on at higher freq & maybe some tighter timings :D
Good luck in your benches.
I'll be benching single-card as well this weekend ( in blind however, no temp sensors here :D ) but with a "real" single-card ( 9800GTX coldbug edition :p: )
Almost got ya for now, BZ :) Can I post a "warm-up" for 10:xx category, please? ;) No copy-waza or maxmem yet.Quote:
Originally Posted by BenchZowner
Just some whimsy 9-9-9 action :p:
http://www.clockmehigh.com/TestingAt...F-ES_small.gif
:toast:
I'm not gonna let this happen :p:
[ benches again soon...actually the computer will... I will be taking a bath :D ]
11m 59.344s @ 3620.9
http://img100.imageshack.us/img100/9...3621rt0.th.png
Not so bad entry for such FSB, i think
Hipro5 seems too far :clap:
10m 59.485 @ 3995.1
http://img150.imageshack.us/img150/1...3995ku8.th.png
Hard to challenge 3oh6 with sub-500 FSB ... i think :D
any and all action is more than welcome :up:Quote:
Originally Posted by bachus_anonym
i am just doing some 1000MHz+ CL7 32m testing right now so expect some fun updates here hopefully...and in the Ballistix PC3-16000 OC Report ;)
thanks but your right, high FSB plays a large role int he performance...some chipsets more than others too. i know one that loves FSB and high memory clocks in 32M :DQuote:
Originally Posted by koda
every time i come back to this thread i have to spend some time on a clock and since i was just working with this Ballistix kit at 1000MHz 7-6-5, i figured i would test it against some other setups...the results were good :up:
E8400 (Q808A476) 7 x 566 (boot at 566*7)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Swiftech MCW30/PA 120.2/DD5 // P5B-Dlx SB (SPP // MCP cooling)
Ballistix 2x1GB PC3-16000 CL9
Biostar 7600GS
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Silverstone Zues ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
3961.8MHz SPi 32M = 10m 59.016s
click for full size including memset...
http://img.photobucket.com/albums/v2...1_1006-1sm.png
vdimm? That's looking awesome. :up:
shoot, i knew i was forgetting something. vDIMM = 2.197v DMM from the DIMM slot, ground on the lower rear MB mounting hole.Quote:
Originally Posted by Gautam
looks to be topping out for single 32M at around 1010MHz 7-6-5 with all other sub timings the same as the screenshot above at 2.197v.
Very nice 3oh6:eek:
So many Divisors on that 790i, must be nice!
Great result, 3oh6 :up: Very efficient!
Here's my best shot so far.
14m57s375 @ 2992.5
P5K SE FTW! :rolleyes: :D
http://lh3.ggpht.com/d.hopero/SETVZQ....reely.bmp.jpg
Hey mates,
here is my best run
http://img263.imageshack.us/img263/1...m4s4ghzwh7.jpg
I think it is very efficient for QX, ASUS P5E64 WS Evolution is a great board and realy fast!
Only thing what suxx is the Mem Dividers, so with 1:2 is 900 MHz the best what I can get.
Time Zone: 17.xx Update
Proc Speed: 2392.2 MHz
Actual Time: 17.58.657s
Multiplier: 6 x 398
Ram Type: DDR2
Ram Speed: 956 mhz
Ram Timings: 4-5-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com
http://img263.imageshack.us/img263/8...392ghzlmr2.png
Just Tripping! ;)
Pinoy Powah! :D
Time Zone: 18.xx Update
Proc Speed: 2250.7 MHz
Actual Time: 18.59.109s
Multiplier: 6 x 375
Ram Type: DDR2
Ram Speed: 900 mhz
Ram Timings: 4-4-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com
Full Screen :
http://img511.imageshack.us/img511/3...250ghzlqr6.png
Just Tripping! ;)
Pinoy Powah! :D
cant wait for you to have ddr3 fafs!
12m59.891 @ 3279.7
http://img384.imageshack.us/img384/4...3279jm2.th.png
Always so close to 3oh6 ... i definitly need another chipset to challenge you !
http://www.xtremesystems.org/forums/...&postcount=356Quote:
Originally Posted by sobih25
some updates by me & pmp.
e8500 + pmp's d9gtr + p5e3 premium
10.xx
http://img58.imageshack.us/img58/883...6109rp8.th.png
11.xx
http://img501.imageshack.us/img501/2...8938vv4.th.png
i've tried to challenge 3oh6 at sub10 category, but it's really hard with such low FSB and RAM. impossible? :rolleyes:
http://img501.imageshack.us/img501/9...1766ap7.th.png
sub13 isn't possible because 6,5 multi doesn't work. 7 multi = low fsb...
don't know why my loops after 13-15 are much slower than any other lowclock challengers there :confused:
monteboy's tweaker works fine, but i need more runs to test better performance settings.
hot damn, nice work guys. the P5E3-Premium is such a monster at 500FSB, it really is a shame i am having no luck at all with mine. i don't think i will be able to touch those with the 790i unless i find time in my tweaks because the hardware is absolutely maxed at this point. i will do an update in the next couple of days. i have a little bit more on my plate i need to clean off before i start having fun again ;)
Very nice score sobih25
PL6 is hard....I take with PL7 12'09''
Is north at air? Vnorth?
Thx
http://img68.imageshack.us/img68/616...5866oc3.th.jpg
aircooled ofc, just used noisy delta fans. vnb 1,69v-1,72v from bios. that's all.
you guys are doing really great
so bloody fast :up:
that RAM you have is amazing
If you use the SpiTweaker please show it on your Screenshots that all other people can see which Waza settings are used.Quote:
Originally Posted by sobih25
I build a smaller GUI Version , check this -> http://www.xtremesystems.org/forums/...&postcount=379
used 600mb 1024kb files.
i tried to use this spi tweaker and it's a bit weird
when i look at my system available memory it's maxed out but cached memory size is at a bare minimum :confused:
i've tried with and without CDT and also with smaller file size
but it doesn't look right and at same settings monte is on for 11m run i'm a few seconds slower
http://img128.imageshack.us/img128/6361/79582715vb4.jpg
@Dinos22
If you want balance mem & cache try larger Waza. 1840 MB & 1024KB filesize
+ CDT. For me the balanced system was not the best choice. I have better results with smaller Waza & sngle file size.
Try Dino different Parameters , there are many factors that affect Spi32M time. Such Partition Size , MaxMem , pagefile size & location.
Parameters which are good for my systen should not always be the best for others.
I've not check any balance between total/available ever.
daaaaaaaaaaaaaaamn
i just did a flat 12m time at 3627MHz lol
i'm too tired for this now lol
gotta hit the bed hehehe
i will try to do some Pmem tweaks to beat hipro5 in sub12m category :up:
http://img393.imageshack.us/img393/9...63at362po5.png