On Air......not Maxed Out Yet....

Printable View

Show 100 post(s) from this thread on one page

10-18-2007, 10:18 AM
BeardyMan

Quote:

Originally Posted by FUGGER

ATI has no cards for me so I dont even care to push crossfire, but I could be rolling 5.3Ghz benches now on Vapo.

Quite understandable no :D (AMD/ATI)
10-18-2007, 10:32 AM
Zeus

OMG!! :drool2:

Gonna start saving some do, i just have to have one.

Sub10sec SuperPi 1M on air is more than i could have dreamed of.

If 4.7GHz+ on an ES chip is possible on air, i have a gut feeling 5GHz on a good watercooled rig with a very good retail chip might be within reach. :eek:

Imagine that...

George, what's the default Vcore of that chip?
10-18-2007, 12:30 PM
hipro5

Super-Pi 1M SUB 8 sec DONE......... :p:

How does it sounds if it benches 2k6 FOR START (I haven't "search" it yet) at 5605MHz.....?....:D
10-18-2007, 12:31 PM
Zeus

Come on man, give us a screenie!! :toast:
10-18-2007, 12:37 PM
hipro5

I'm testing now and I post from another computer......:(
10-18-2007, 12:39 PM
M3kk

Quote:

Originally Posted by hipro5

Super-Pi 1M SUB 8 sec DONE......... :p:

Mhz? :D
10-18-2007, 12:40 PM
hipro5

Quote:

Originally Posted by M3kk

Mhz? :D

I played it with "soft" ram speed....At 5800MHz....7.774s something like that....
:D
10-18-2007, 12:47 PM
Movieman

Quote:

Originally Posted by hipro5

I played it with "soft" ram speed....At 5800MHz....7.774s something like that....
:D

Your a tease! :rofl: :cord:
10-18-2007, 12:52 PM
865pe

Nice clock 4.7Ghz air :eek: :clap:
10-18-2007, 12:52 PM
Martijn

Quote:

Originally Posted by hipro5

I played it with "soft" ram speed....At 5800MHz....7.774s something like that....
:D

Need tissues :slobber:
10-18-2007, 12:58 PM
DMH

When they star benching real hard this will be sub-7s on PI
10-18-2007, 12:58 PM
hipro5

NO SHI(f)T.......!.......5708MHz 2k5 EASY......:eek:
10-18-2007, 01:00 PM
Movieman

Picks up phone, books flight to Hellas...:D
10-18-2007, 01:05 PM
M3kk

Dont forget a winrar bench :D.
10-18-2007, 01:07 PM
hipro5

Quote:

Originally Posted by Movieman

Picks up phone, books flight to Hellas...:D

:D

Quote:

Originally Posted by M3kk

Dont forget a winrar bench :D.

At ~ 5605MHz that I have tested - if I remember well - it was 3670.... :)
10-18-2007, 01:19 PM
Misko

Bravo hipro5 :up: , I think the battle for 6.xxx sec Spi 1M starts now :)
10-18-2007, 01:26 PM
Bobsama

*waits to shatter HiPro's SPi 1M record*

Oh wait... I'm poor and I don't have connetions!

*waits to shatter HiPro's current SPi 1M record in a decade*
10-18-2007, 01:28 PM
PcCI2iminal

WOW
very impressive Hipro,my Q6700 needs a extreme cooling to reach 4600mhz :(

congrats
10-18-2007, 01:28 PM
BeardyMan

dammit i would have an instant boner when benching at 5.7ghz 05 :eek: (in a way of speaking eh :rolleyes: )

7.7secs ?

the end of superpi 1M is near :(
10-18-2007, 01:39 PM
ZoLKoRn

Oh crazy ! 5.7GHz on 3k05 bench is easy :eek: hope to see 6GHz on 3D benching ;)

cheers :up:
10-18-2007, 01:40 PM
DMH

Start PI 2M war:D
10-18-2007, 01:44 PM
BeardyMan

Quote:

Originally Posted by DMH

Start PI 2M war:D

2M is at around 21secs i believe....
Hipro could be teh first to break 20secs on that one :D
10-18-2007, 01:50 PM
metro.cl

Hipro is 6GHz posible for benching?

Upload more pics / benchs :)
10-18-2007, 01:50 PM
hipro5

Tested at -48*C (in case of single stage phase change) and it boots EASY into windows at 5160MHz....:)

EDIT: at -104*C it boots into windows at 5590MHz.....
10-18-2007, 01:54 PM
RPGWiZaRD

Quote:

Originally Posted by hipro5

Tested at -48*C (in case of single stage phase change) and it boots EASY into windows at 5160MHz....:)

lmao. :D :up:

Voltage used?
10-18-2007, 02:02 PM
hipro5

Quote:

Originally Posted by RPGWiZaRD

lmao. :D :up:

Voltage used?

Ahhh......VCore.......I'll analyze that later on which is VERY relative to the cold bug....:) ;)
10-18-2007, 02:03 PM
Slay0r

Quote:

Originally Posted by metro.cl

Upload more pics / benchs :)

^^^^^ :up: :D
10-18-2007, 03:41 PM
hipro5

For start at ONLY 5605MHz......;) :D

I will NOT post higher than 5605MHz 3DMarks coz we have to do something in our Overclocking Event tomorrow.......;)

http://www.hipro-tech.com/images/hip...MHz_7.797s.png

Aquamark3 @ 5605MHz with CrossFire @ 880/990....VGAs ON AIR....

http://www.hipro-tech.com/images/hip...CF_880_990.gif
10-18-2007, 03:59 PM
Gautam

:wierd: :wierd: :fight: :YIPPIE: :party:
10-18-2007, 04:00 PM
KTE

:eek: :woot:
10-18-2007, 04:00 PM
F.O.G.N.A.

:shocked: :shocked: :shocked: :shocked: :shocked: :shocked:

:clap: congrats hipro5 :up:

You're formidable ;)
10-18-2007, 04:27 PM
youngpro

that aquamark score is nuts!

damn hipro some great detailed information for everyone to gauge the true performance increase for yorksfield over conroe/kentsfield, awesome stuff,

i think everyones mouths are watering for some new cpus
10-18-2007, 04:28 PM
flesheatinvirus

I can not wait to get my hands on one of these chips! nice work as usual.
10-18-2007, 04:47 PM
BNDMOD

OMG :d please i need that chip :p please send me.. to argentina...... jejeje... it's a lovely chip :d
10-18-2007, 07:35 PM
hipro5

OK......Some more updates and I'll stop (I'm tired :( ).....

All these 3D benchmarks were done with LOW FSB and LOW Mem Speed coz I test the CPU for now... ;)

Aquamark3 at 5605MHz with SINGLE XFX 8800Ultra @ 1008/1124

http://www.hipro-tech.com/images/hip..._1008_1224.gif

A 2k1 @ 5605MHz with SINGLE XFX 8800Ultra @ 1008/1142

http://www.hipro-tech.com/images/hip...008_1242_1.png

http://www.hipro-tech.com/images/hip...008_1242_2.png

http://www.hipro-tech.com/images/hip...008_1242_3.png

A 2k5 @ 5605MHz with SINGLE XFX 8800Ultra @ 1008/1142

http://www.hipro-tech.com/images/hip...008_1242_1.png

http://www.hipro-tech.com/images/hip...008_1242_2.png

http://www.hipro-tech.com/images/hip...008_1242_3.png
10-18-2007, 07:38 PM
dinos22

slow down malaka :p: leave some for others :D

excellent results and nice clocking card you got there
what sort of volts on the core?
10-18-2007, 07:42 PM
perkam

...Yorkfield just walked into the room:

http://img170.imageshack.us/img170/9800/detailedwn5.jpg

We're Doomed. X( X( X( :eek: :eek: :eek:

I do believe you single handedly just put AMD behind a decade.

Perkam
10-18-2007, 07:43 PM
hipro5

Quote:

Originally Posted by dinos22

slow down malaka :p: leave some for others :D

excellent results and nice clocking card you got there
what sort of volts on the core?

Fluck off... :D :p:

I'm benching "low" for now as I said coz tomorrow in the O/C Event, we have to show to ppl something different...so I don't push hard .... ;)
Also VGA is in "low mode" as well.... :D :p:

VCore at this frequency, I keep it at 1.8V due to 2k6 bench.....I don't touch it for the other benchies.....all others need ~ 1.73V for 5605MHz.....:)
10-18-2007, 07:46 PM
Movieman

George: Please stop showing this..
Remember my age..You could be responsible for stopping my heart!:p:
My best to you and have a ball with the other guys tomorrow!:up:

( And get your father to force feed Fr3ak some raw squid!:rofl:
10-18-2007, 07:46 PM
VictorWang

lol, single card 05 WR=MM's 2900xt with 5.2G c2d :D
http://img142.imageshack.us/img142/8959/32369617kr3.jpg

damn Geroge, u got an awesome yorkfield, hope mine can catch up with u. lol
10-18-2007, 07:57 PM
dinos22

Quote:

Originally Posted by hipro5

Fluck off... :D :p:
:)

you got something stuck in your teeth :p: :D

can't wait to see that CPU and that shamino monster go at it tomorrow :up:
10-18-2007, 08:22 PM
warlockza

Good luck George,
Say hi to all the guys from Peter (x-abit guy)

Damn I'm impressed. Such a pity you don't have an abit or DFI board to play with to see if the ASUS is all it's cracked up to be.
10-18-2007, 08:38 PM
warlockza

Great moves George, excellent scores.
keep on pushing on that Yorkie until she shows you the love.
10-18-2007, 08:53 PM
Zeus

Speechless....

332K aq3, how long did that take to run?

Some 15 seconds? :D

If this is taking it easy, i'm holding my breath for the hardcore runs.

Keep up the great stuff master!! :toast:
10-18-2007, 09:41 PM
Friday~13rd

OH !!! next generation

9.xxx it easy on air
10-18-2007, 09:43 PM
Achill3uS

go to hell hipro :D this results are insane :eek:
can't wait to the retail yorkie's and wolf's :yepp:
dont you have any system pics for us pls? :)
10-18-2007, 09:58 PM
STEvil

cant wait for the hammer to drop ;)
10-18-2007, 10:01 PM
railer

:up: :up: :up: :up: :up: :up:
Congrats!!! awesome cpu you got there. Best of luck for tomorow
10-18-2007, 10:05 PM
Kobalt

:eek: :eek: *starts saving money for Yorkfield*
10-18-2007, 10:14 PM
Harshal

Dat AquaMark score is crazy...
Good Luck to you all!!
Till 45nm goodness is available... rest of us can go back to Ocing whateva we got in our rigs.. ok make it on bench-table :D
10-18-2007, 11:04 PM
hipro5

@ dinos22: LOL.... :D

@ Victor: As you can see, I have played it "low" as for rams and fsb....Not to mension the low clocks on the VGA too.... :)

@ warlockza: Where have you been Peter?....Gkad to reading you M8!.....You're gone from ABIT?....

@ Zues: Thanks M8 but do me a favor....Cut this "master" word....I'm not a master....We are all masters of ourselves... ;)

@ Achill3uS: System pics?....You'll see a LOT from the day after tomorrow.... ;)

@ railer & harshal: Thanks guys...
10-18-2007, 11:09 PM
Monstru

Well....that is one wicked CPU, and it ended up just in the right hands. We know now that 6Ghz is a sure fact in the near future. Oh boy....Hipro is doing it again, let those WR come :D
10-18-2007, 11:12 PM
metro.cl

Peter is at a PR company now working on GlacialTech PR.
10-18-2007, 11:21 PM
ZoLKoRn

:eek: WoW... AM3 300k is cake by single card, i really love Yorkie :D
excellent for all results Hipro5 :up: :up: :up: , Congrats...

Have a nice day and funny on your event tomorrow :)

Cheers..
ZoLKoRn
10-18-2007, 11:36 PM
hipro5

Thanks guys..... :)

saaya IS here and now k|ngp|n should be here too....up to noon we will be ALL together I think.... :)
10-18-2007, 11:39 PM
eva2000

Quote:

Originally Posted by hipro5

Thanks guys..... :)

saaya IS here and now k|ngp|n should be here too....up to noon we will be ALL together I think.... :)

the oc'ing world is shaking in it's virtual boots right now... poor ORB and hwbot databases.. they're going to have to rewrite their codes to handle the higher numbers LOL
10-19-2007, 01:12 AM
Johnny Bravo

George what sorta volts are you putting through those memory sticks to get 6-6-6 timings @ 862MHz must be pretty high?!
10-19-2007, 01:33 AM
hipro5

Quote:

Originally Posted by eva2000

the oc'ing world is shaking in it's virtual boots right now... poor ORB and hwbot databases.. they're going to have to rewrite their codes to handle the higher numbers LOL

Heh, heh, heh......Vince is here and he went to his hotel to get some sleep.... :D
He DIDN'T sleep ALL these hours of flight in the plane from USA to Hellas.... :D

Quote:

Originally Posted by Johnny Bravo

George what sorta volts are you putting through those memory sticks to get 6-6-6 timings @ 862MHz must be pretty high?!

I feed them 2.35Vdimm via my DDR Maximizer...
On my first ASUS P5E3 WS Pro, with Cas 6-5-4-5-13-5-41-5-15-16-2-6-2-2, they do 910MHz
On my second ASUS P5E3 WS Pro with the same timmings they do 900MHz
and on the Blitz Extreme they do 890MHz.....

For the 3D/Super-Pi benchies I've run, I had them a bit "relaxed" to find the CPU's frequency and to be sure that there were not my rams during crashings...;)
10-19-2007, 02:03 AM
gundamit

Wow! :shocked: I'm getting dizzy just reading this thread and I know you're just setting the stage up for the big event. Need to have a few beers before those results start coming in. Thanks for keeping us entertained while we all wait for our 45nm fix in January. :D
10-19-2007, 02:16 AM
Johnny Bravo

Quote:

Originally Posted by hipro5

[B]
I feed them 2.35Vdimm via my DDR Maximizer...
On my first ASUS P5E3 WS Pro, with Cas 6-5-4-5-13-5-41-5-15-16-2-6-2-2, they do 910MHz
On my second ASUS P5E3 WS Pro with the same timmings they do 900MHz
and on the Blitz Extreme they do 890MHz.....

For the 3D/Super-Pi benchies I've run, I had them a bit "relaxed" to find the CPU's frequency and to be sure that there were not my rams during crashings...;)

Haha - I have three greek friends here in my dept who think you are a "crazy malakas" ;) (you guys seem to love that phrase!!!) That voltage is high even for DDR2 :D It's a good job you've got a cellchock rep on your side ;)
10-19-2007, 02:19 AM
hipro5

Quote:

Originally Posted by Johnny Bravo

Haha - I have three greek friends here in my dept who think you are a "crazy malakas" ;) (you guys seem to love that phrase!!!) That voltage is high even for DDR2 :D It's a good job you've got a cellchock rep on your side ;)

Ha, ha, ha.....Give them my regards.... :D

No, the Vdimm is OK...... :D :p:
10-19-2007, 02:25 AM
massman

Yorksfield does to Conroe what Conroe did to A64 :D

Athens will be :eek:
10-19-2007, 02:33 AM
BeardyMan

Good luck ,peter, george and vince .:up:
10-19-2007, 02:37 AM
hipro5

Thanks guys....:)

To be honest, my BIG problem is the Striker.....NOT as a mobo BUT as i680 chipset.....IT IS CRAZY.....Shi(f)t!....
I anxiously expect the day that I'll use SLI on an INTEL chipset based mobo so ALL my troubles go away.....
I JUST HATE this i680..... :(
10-19-2007, 02:44 AM
SIOUX

Jebus George......103k 01 single card, and you are not even pushing it:slobber:

I also have problems with the 680i chipset....in the end i gave up SLi for now....those 680i are so unstable at high mhz:(
10-19-2007, 03:01 AM
zakelwe

2001 Car high of over 400fps ... that is the first time I have seen that.

:toast:

Regards

Andy
10-19-2007, 03:04 AM
BeardyMan

Quote:

Originally Posted by zakelwe

2001 Car high of over 400fps ... that is the first time I have seen that.

:toast:

Regards

Andy

you haven't seen it while benching the 6600GT and X6800?:D
10-19-2007, 03:16 AM
Hazzan

Only one words .........AMAZING...HIPRO 5 !!!
10-19-2007, 03:20 AM
hipro5

Quote:

Originally Posted by zakelwe

2001 Car high of over 400fps ... that is the first time I have seen that.

:toast:

Regards

Andy

443fps with the ATIs.... :D
10-19-2007, 03:25 AM
massman

Quote:

Originally Posted by zakelwe

2001 Car high of over 400fps ... that is the first time I have seen that.

:toast:

Regards

Andy

Can you see yourself benching in the shed with low-end gpu's and a yorksfield? :D
10-19-2007, 03:58 AM
nikolas61

good job :clap:

Congrats
10-19-2007, 04:26 AM
OBR

I am sure, retail cpus will be not a good clocker like this pre-samples ... but i pray for it!
10-19-2007, 04:27 AM
BeardyMan

Quote:

Originally Posted by OBR

I am sure, retail cpus will be not a good clocker like this pre-samples ... but i pray for it!

it has always been that retails owns the ES. why should it change now ;)
10-19-2007, 04:35 AM
misteroadster

Quote:

Originally Posted by hipro5

Thanks guys....:)

To be honest, my BIG problem is the Striker.....NOT as a mobo BUT as i680 chipset.....IT IS CRAZY.....Shi(f)t!....
I anxiously expect the day that I'll use SLI on an INTEL chipset based mobo so ALL my troubles go away.....
I JUST HATE this i680..... :(

The most real thing in this thread, the Striker is a real nightmare, i don't understand it,.... when it survive :D.

Never Striker never ....

Now i'm working on Nvidia design (albatron i680), really better 420Mhz FSB easy with quad.

Great demonstration of power Hipro :up:
10-19-2007, 04:41 AM
kiwi

What's malaka? :D
10-19-2007, 04:51 AM
zakelwe

Quote:

Originally Posted by massman

Can you see yourself benching in the shed with low-end gpu's and a yorksfield? :D

Hey with a Yorkfield I'd be using Integrated graphics and still be pushing out 300fps :rofl:

maybe

:D

Regards

Andy
10-19-2007, 05:32 AM
Vatos_locos

kiwi kind of dirty word :D

Hipro can't whait until tomorow i hope we all can fit inside the mall :D
10-19-2007, 05:49 AM
MTP04

WOW:shocked: , I am really shocked at what these 45's are capable of. I've been watching this thread since it started and I am so impressed that I am left speechless:shrug:

Nice work Hipro :)
10-19-2007, 06:09 AM
dinos22

Quote:

Originally Posted by kiwi

What's malaka? :D

http://en.wikipedia.org/wiki/Malakas

but it can be used in all sorts of instances

have you heard that song >> meaning of the word f.u.c.k >> weeeellll something along those lines but malaka has a different meaning heheheheh

yeah greeks use it a lot!!!
i only use it as a joke of course lol.... :D
10-19-2007, 06:10 AM
sang

Quote:

Originally Posted by zakelwe

2001 Car high of over 400fps ... that is the first time I have seen that.

:toast:

Regards

Andy

has been done before
http://www.xtremesystems.org/forums/...37#post2290837

hipro5 - you got a flucking great cpu,my man ! :)
10-19-2007, 06:27 AM
mup0

ITS DAMN GOOD.HELL YEAH 7 sec superpi 1mb...just...i cant find words to speach it ...pf i want one of it..
10-19-2007, 06:39 AM
ZoLKoRn

Quote:

Originally Posted by dinos22

http://en.wikipedia.org/wiki/Malakas

but it can be used in all sorts of instances

have you heard that song >> meaning of the word f.u.c.k >> weeeellll something along those lines but malaka has a different meaning heheheheh

yeah greeks use it a lot!!!
i only use it as a joke of course lol.... :D

Oh Yeah... :D :D :D
10-19-2007, 07:43 AM
Vatos_locos

:D:D:D i didn't know that Malaka is on Wiki :p and yes Greeks use it a lot instead of the real name :/
10-19-2007, 08:34 AM
Hyperr

:shocked: :clap:
10-19-2007, 09:27 AM
rra

WOW wow 7.794 and you taking it easy not what I was expecting this is crazy you guys must be flipping over moon when these scores keep comming up higher and higher.Damn we were looking at breaking 8 seconds now you guys are getting closer to 6.xx than could ever be believed :yepp: :clap: :clap:
I dont know if its me but these seem so much quicker clock for clock ??????
10-19-2007, 10:04 AM
hipro5

Thank you guys..... :)
Tomorrow we will start in "soft mode" at 5605MHz ALL benchies
SINGLE ATI
SINGLE NVIDIA
CrossFire
SLI
....and AFTERWARDS we will push..... ;)
10-19-2007, 10:06 AM
BeardyMan

Quote:

Originally Posted by hipro5

Thank you guys..... :)
Tomorrow we will start in "soft mode" at 5605MHz ALL benchies
SINGLE ATI
SINGLE NVIDIA
CrossFire
SLI
....and AFTERWARDS we will push..... ;)

can you tease us with equiped that is going to be used?

dragon F1? new tek's? mobos? :slobber: :slobber:
10-19-2007, 10:12 AM
hipro5

Quote:

Originally Posted by BeardyMan

can you tease us with equiped that is going to be used?

dragon F1? new tek's? mobos? :slobber: :slobber:

Mobos:
ASUS Striker Extreme with the bludie i680
ASUS Blitz Extreme
2 x NVIDIAs 8800 Ultra
2 x ATI HD2900
CellShock Rams DDR2 and DDR3
TOO MANY DELTA fans... :D :p:
PSU hipro-tech 1200Watts
DDR Maximizer
2 x Tek-9 (older) on the NVIDIAs
2 x Tek-9 (new) on the ATIs
1 x F1 Pot
1 x Gorillakos Pot (rev.0000001) :D
180 litters of LN2... :D
10-19-2007, 10:13 AM
BeardyMan

Quote:

Originally Posted by hipro5

Mobos:
ASUS Striker Extreme with the bludy i680
ASUS Blitz Extreme
2 x NVIDIAs 8800 Ultra
2 x ATI HD2900
CellShock Rams DDR2 and DDR3
TOO MANY DELTA fans... :D :p:
PSU hipro-tech 1200Watts
DDR Maximizer
180 litters of LN2... :D

that is your share of the part? or all togheter?

quite horny list :D
10-19-2007, 10:16 AM
hipro5

ALL together.... :D
10-19-2007, 10:21 AM
RPGWiZaRD

Quote:

Originally Posted by hipro5

Mobos:
ASUS Striker Extreme with the bludie i680
ASUS Blitz Extreme
2 x NVIDIAs 8800 Ultra
2 x ATI HD2900
CellShock Rams DDR2 and DDR3
TOO MANY DELTA fans... :D :p:
PSU hipro-tech 1200Watts
DDR Maximizer
2 x Tek-9 (older) on the NVIDIAs
2 x Tek-9 (new) on the ATIs
1 x F1 Pot
1 x Gorillakos Pot (rev.0000001) :D
180 litters of LN2... :D

Sounds like a good reciept for doing some severe damage. :hehe:
10-19-2007, 11:06 AM
ANP !!!

Your one Crazy guy :eek: :eek:.
10-19-2007, 11:26 AM
Fuzzy_3D

Any chance of some quick Cinebench scores?
10-19-2007, 11:34 AM
warlockza

Now if I was there, I'm sure there would be a 500 liter LN2 bottle (to keep the beers cold too) and a whole lot of good times and clocking to look forward to....
damn damn damn I am stuck in Taipei.
I guess I know how you felt george when you were in Helos and we were knocking back the LN2 in Computex.
Well it seems there will still be good times of overclocking.. Good luck on the run, Hope u can hit 6sec's

Cheers
10-19-2007, 11:52 AM
hipro5

Quote:

Originally Posted by Fuzzy_3D

Any chance of some quick Cinebench scores?

When we finish all 3Ds, we will give it a shot....:)

Quote:

Originally Posted by warlockza

Now if I was there, I'm sure there would be a 500 liter LN2 bottle (to keep the beers cold too) and a whole lot of good times and clocking to look forward to....
damn damn damn I am stuck in Taipei.
I guess I know how you felt george when you were in Helos and we were knocking back the LN2 in Computex.
Well it seems there will still be good times of overclocking.. Good luck on the run, Hope u can hit 6sec's

Cheers

Thanks Pete.......Hmmm.....6sec ONLY with retail chip C1.....;)
10-19-2007, 12:04 PM
BeardyMan

Mister Yorkfield :D

Does Vince and Peter bring a yorkield as well?
10-19-2007, 12:17 PM
hipro5

Quote:

Originally Posted by BeardyMan

Mister Yorkfield :D

Does Vince and Peter bring a yorkield as well?

Peter YES....;) :D
10-19-2007, 12:22 PM
BeardyMan

Quote:

Originally Posted by hipro5

Peter YES....;) :D

you think you can slam both into the socket?:D

ok thanx for the info Hipro ;)
10-19-2007, 12:39 PM
massman

Yeap, Sham took his 6G chippie to Athens :D
10-19-2007, 01:23 PM
BenchZowner

Quote:

Originally Posted by massman

Yeap, Sham took his 6G chippie to Athens :D

Exchanges 3 awesome chicks with that chip :p:
Sham pm me for details :p: LOL

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:58 AM.

XtremeSystems