DDR2: 650MHz club

http://img490.imageshack.us/img490/3...hzspi1mhb7.jpg

2.40V. Ignore the Spi time, was concentrating on the RAM clocking.

2GB kit, Dual-channel! :D Team Xtreem OPB/K404 Edition D9GMH

Gigabyte P35 DS4

repost coz my last entry was missed :p:

Ballistix PC2-5300 2x512M D9GMH
Not so good. They need 2.65v to get 650MHz :) and not stable
BSOD after CPU-Z screenshot

Intel Core 2 Duo E6320, L648G420
Gigabyte P35C-DS3R, bios F2

Crucial Ballistix PC2-8500 CL5 EPP
@680MHz, DDR1360
CL5-5-5-15, 2.5V

http://valid.x86-secret.com/show_oc?id=228161

Me Crucial on the P35C. Vdimm 2.58:

http://img.photobucket.com/albums/v2...900mhzmmst.jpg

4GB Crucial Tracers 8500s @ 2.40
On P5K DLX

Hopefully this thread is still being updated.

http://img361.imageshack.us/img361/9227/capturebg0.jpg

2GB G.Skill F2-8500CL5D-2GBHK @ 2.47v (set 2.5v in Bios on P35-DS4)

http://www.muenster.de/~e30pics/Bild...GBHK/Pi-01.jpg

OCZ Platinum 8000 1GB kit on Gigabyte P35-DQ6

http://i168.photobucket.com/albums/u...z660c526vs.png

http://valid.x86-secret.com/show_oc?id=213723

& again ei ei

Intel Core 2 Duo E6320, L648G420
Gigabyte P35C-DS3R , bios F2

Buffalo Firestix FSX1066D2C-K1G, PC2-8500 CL5, 2x512MB
@666MHz, DDR1332 CL5-6-6-18, 2.75V
SuperPI 32M, Single

http://valid.x86-secret.com/show_oc?id=229266

ocz ddr8800 at 2.51 volts and stock timings. didnt try any higher ran out of time my bro had to leave. super pi locked up at the last calculation:(. will try more soon. lata

http://valid.x86-secret.com/show_oc.php?id=231358

Team Xtreme DDR2-1066 @ DDR2-1303 CAS 5 Single Channel w/ 2.5v

http://valid.x86-secret.com/show_oc.php?id=231930

I used only 1 stick coz the other one is maxes out at DDR2-1200. :(

Sorry sorry guys. Real sick atm. Will update tomorrow sometime.

Quote:

---

Originally Posted by I34z1k

Sorry sorry guys. Real sick atm. Will update tomorrow sometime.

---

Never mind, health and safety come first! Get well soon!

waaaa! get well soon man. :D

Lol thanks thanks. Update time I reckon :)

Noooooooooooooo! ;'( I got all the frikkin way to the end of page 5 :( Then I pressed a link @ the top of FF and lost it all. OMW :(

Ok, anyone that is not on the list, please pm me :) Gimme a few min first tho :P

Quote:

---

Originally Posted by r.h.

TWIN2X2048-5400C4 @650MHz 5-5-5-15 @2.5v

CPU-Z Validator

http://www.abload.de/thumb/corsair-650mhzqq4.jpg

:explode2: :D

---

You need 0.5 more :P :D

Quote:

---

Originally Posted by superray

Ballistix PC2-5300 2x512M D9GMH
Not so good. They need 2.65v to get 650MHz :) and not stable
BSOD after CPU-Z screenshot

---

Hey bud. I need at LEAST a 1m and a full 650.

Ok guys, gonna say the rules AGAIN...

1M or 32M

2gig dual channel. the size can differ, but MUST be dual channel.

Please put all the specs in text as well as the pictures often will not load on my side.

Thanks.

oh. oh well, got to feed insane volts to make em run on dual channel. :D hehehe

Intel Core 2 Duo E6320, L648G420
Gigabyte P35C-DS3R Rev 1.1, Bios F3b

Crucial Ballistix PC2-8500 CL5 EPP, 2x1024MB

SuperPI 1M
@699MHz, DDR1398
CL5-5-5-15, 2.61V
Air Cooling

http://valid.x86-secret.com/show_oc?id=234596

CPU : E6420 L651B980
Motherboard : GIGABYTE P35-DS3R
Memory : KINGSTON VALUE KVR533D2N4/1G X 2
1.WEEK 07,YEAR 07 SERIL NUMBER 69285387
2.WEEK 07,YEAR 07 SERIL NUMBER 66283F86
Graphics Card : ASUS EN7900GT
Display : VIEWSONIC 20 INCH,VX2025wm
Storage & OS : Seagate 200 G ,sata2
Cooling : Watercooling in the works Thermaltake 745 Set
Case : Testbase
PSU : Enermax 485W Noisetaker

VCORE 1.55 V.DIM 2.55

http://img338.imageshack.us/img338/7981/bus2kc7.jpg

http://img206.imageshack.us/img206/9319/bus23ch4.gif

http://valid.x86-secret.com/show_oc.php?id=235763

้็THIS IS BEFORE SAME SYSTEM
CPU : E6420 L651B980
Motherboard : GIGABYTE P35-DS3R
Memory : KINGSTON VALUE KVR533D2N4/1G X 2
1.WEEK 07,YEAR 07 SERIL NUMBER 69285387
2.WEEK 07,YEAR 07 SERIL NUMBER 66283F86
Graphics Card : ASUS EN7900GT
Display : VIEWSONIC 20 INCH,VX2025wm
Storage & OS : Seagate 200 G ,sata2
Cooling : Watercooling in the works Thermaltake 745 Set
Case : Testbase
PSU : Enermax 485W Noisetaker

http://valid.x86-secret.com/show_oc.php?id=235628

VCORE 1.55 VDIM 2.55

http://img98.imageshack.us/img98/5585/kngstonuf9.gif

http://img98.imageshack.us/img98/208...ingstonhw4.gif

Ballastix PC2-8500 5-5-5-1 @ 1384Mhz / 2.55v Dual Channel.
P5K Dlx.

http://img263.imageshack.us/img263/893/692vb0.jpg

http://img263.imageshack.us/img263/4...6921mpivl1.jpg

Here is my first round of tests.


666MHz 5-5-5-15 2.3v

2GB(2x1GB) Crucial Balistix Tracer PC28500
Gigabyte P35 DQ6











http://img214.imageshack.us/img214/3...perpi1mab5.png

http://marc.bellini.free.fr/Ram/Pc%2...ette%20no1.png

My new Crucial ballistix Tracer Pc667 C3 from RMA... :D

http://img502.imageshack.us/img502/9...75voltfkd2.jpg

http://img399.imageshack.us/img399/4213/1300wm0.jpg

The limit is the mainboard. :)

would this qualify?

http://valid.x86-secret.com/show_oc.php?id=251649

650Mhz with 3Gb on P5K-E :D

2x1024MB PC2-8500 Ballistix + 2x512MB PC2-6400 Ballistix

http://www.abload.de/img/3gb-04hcz.jpg

672Mhz 1M :)

http://www.abload.de/img/3gb-05j49.jpg

those are swwwwwwweeeeeeeeeeeeeetttt numbers! :)

hello guys, test with X38 DQ6...:)
Mem at 2,67v (bios reading)

CPUZ Verification link

http://i164.photobucket.com/albums/u...-5-5-5_32M.jpg

http://i164.photobucket.com/albums/u..._5-5-5-5-5.jpg

Hope this is good for my submission.
using mem in my sig

http://i118.photobucket.com/albums/o...50spismall.jpg

@665.8Mhz 5-5-5-15 at 2.54v for quick validation only

http://fileshosts.com/intel/Asus/Bli..._validated.png

http://fileshosts.com/intel/Asus/Bli...uz_spd_mem.png

DDR2-1320 5-5-5-15 @2.4v

http://aycu08.webshots.com/image/327...0281983_rs.jpg

Ballistix pc8500 at 2.2v 660 mhz 5-5-5-15
http://img229.imageshack.us/img229/4...hz1msw3.th.jpg

Crucial Ballistix DDR667 CL3 @ 1310Mhz 5-5-5-15 2.3v on ASUS P5K ;)!

Received 2 days ago and still testing.
Crucial Ballistix 8500 on DFI UT P35, 2,49v:

Actual max Validation @ 666mhz:D
http://valid.x86-secret.com/show_oc.php?id=260481

PI 1M @ 660mhz
http://www.pctunerup.com/up/results/...al6605-5-5.jpg

ADD:
Validation @ 680mhz
http://valid.x86-secret.com/show_oc.php?id=260488

PI 1M @ 666mhz:
http://www.pctunerup.com/up/results/...ucial6661M.jpg

Here my first resault of testing dominator's mem on new mobo:

Mobo: EVGA 122-CK-NF68-AR (680i) (BIOS: P31)
Memory: Corsair Dominator TWIN2X2048-9136C5D (1 stick 2.5v 5-5-5-15, aircooled)
Processor: Core 2 Duo E6850 SLA9U MALAY L719A773
Cpu cooler: ThermalRight SI-128
PowerSupply: FSP Kingcraft 1000w

CPU-Z Validation

SuperPi 1M:
http://img239.imageshack.us/img239/1524/76607572yj4.png

http://i59.photobucket.com/albums/g2...o/Validate.jpg

http://peecee.dk/?id=76342

http://valid.x86-secret.com/show_oc.php?id=263065

650.7 MHz
2.30v
5-5-5-15
2x1GB Dual Channel

Corsair XMS2 PC-6400 Cas4 version 1.2

i found myself with 4*1GBs of PC2-9200 OCZ Reaper HPC so i figured i would at least try for some 4GB 650MHz action since i haven't seen it up here yet ;)

P5B-Dlx (C1)
PC2-9200 OCZ Reaper HPC 4*1GB
2.45v (max BIOS set)

651MHz Single 32M
http://img.photobucket.com/albums/v2...ingle32m-1.png

this is 1M stable up to 660MHz, and could validate at 680MHz but wouldn't run dual 32M at 650MHz or single 32M at 660MHz. i might have squeezed more out of it by swapping order of the sticks around but didn't bother.

http://img.photobucket.com/albums/v2...gb_valid_1.png

nice 4x1GB @650Mhz on P5B Deluxe!

Quote:

---

Originally Posted by eva2000

nice 4x1GB @650Mhz on P5B Deluxe!

---

yeah man, i was kind of surprised how easily it was to get that 32M run done. today i am playing with stability. how does 4x1GB 600MHz 5-5-5 sound at 2.25v? HCI Memtest stable for 4 hours now and MCH voltage is only 1.56 so nothing crazy needed to make it happen ;)

http://img.photobucket.com/albums/v2..._memtest-1.png

How about 690Mhz 5-5-5-15 2,55V 1Mb stable with tight sub timings

http://www.livinglarge.pwp.blueyonde.../690-2.55v.JPG

Reached 700Mhz but fiddle with timings & crashed & couldn't be bothered to do again!!!

@ LivinL@rge.....


*envious*

Nice one!

Ballistix 8500 - 665Mhz with 2.45v on Blood Iron :)

Quote:

---

Originally Posted by K404

@ LivinL@rge.....


*envious*

Nice one!

---

I don't think its too bad for a £60 set of memory mate :D got another set to test & I'll find the pair I'll use for benchin' with:cool:

My ballistix pc8500 with 2.22vdimm
http://www.uploadgeek.com/uploads456/1/651xs.JPG

There's plenty of nice DDR2 around i see.

Here are my ballistix 8500 with 2.5V, might try some other time with 2.55V, ~690 is possible i think.

Mushkin PC2 9200 @ 650 5-5-5-2T at 2.45V (Maximus SE):

http://img89.imageshack.us/img89/729/650555lw7.jpg

How about Crucial PC5300 @ 651Mhz 5-5-4-10 2.45V PI 32Mb run I think these will be for benching :D

http://www.livinglarge.pwp.blueyonde...-4%202.45v.JPG

Shoved everything this motherboard has to offer up it's lil bum and got really close to 690MHz:

http://img.photobucket.com/albums/v6.../68945-5-5.jpg

Couldn't seem to reproduce that as the sticks got just warm at 2.55V with a dominator cooler blowing over them, but getting warm is enough to make 'm unstable.

At 2.05V they stay deadcold.

I'm sure if i will try first thing in the morning it will do it again.

Ballistix rocks. :D

asus p5b deluxe wifi with kingston hyper X pc9600@1300mhz 2,4V

http://s1.directupload.net/images/071115/uwmzgogx.jpg

SPi 1M @ 675.3MHz:

http://img265.imageshack.us/img265/3175/675mhz1mpa0.jpg

SPi 32M @ 652.7MHz:

http://img105.imageshack.us/img105/9...2mhz32myf7.jpg

2.47/2.52V

More to think i hope :)

RAM is Crucial Ballistix PC5300 3-3-3

E6600@3,825 with supertalent@637mhz @2,4V
cpu=FSB 425x9 with air

http://s2.directupload.net/images/071117/ap2m79cs.jpg

637 is not enough for 650 club. :slap:

Now get clocking and report back when you've reached 650! :D

Quote:

---

Originally Posted by Zeus

637 is not enough for 650 club. :slap:

Now get clocking and report back when you've reached 650! :D

---

Also, the front page hasn't been updated since August.

Well I thought I would resurrect this old thread hey!

This is without any tweaking or messing around, I did use 2.5v, but I'm pretty sure I can get more out of these for my 2.5volts worth. I didn't bother tightening timings, or squeezing mhz, maybe when I've got some time I will.

Was using OCZ 8500 D9GMH

Timings for any one interested are:

CAS - 5
tRCD - 5
tRP - 5
tRAS - 15
tRC - 22
tRFC - 50
CR - 2t
tRRD - 8
tWR - 6
tWTR - 10
Tref - AUTO
TRD - AUTO

Screen

http://img413.imageshack.us/img413/7046/650cas5ch5.jpg

4x 1Gt aXeRam 650Mhz 5-5-5-15 with maximus formula



http://mauri.1g.fi/kuvat/muuta/maxim...jpg_medium.jpg

some minor voltage bump...;)

Team Xtreem 652.9 MHz 5-5-4-12 @2.19v (in bios, though Windows sees it at as 2.12v)

http://i116.photobucket.com/albums/o...t435MHz2GB.jpg
http://valid.x86-secret.com/show_oc.php?id=280375

Crucial Ballistix PC5300 3CL

This is just the beginning also :D

http://aycu01.webshots.com/image/355...8412812_rs.jpg

mushkin 2x 512 mb ddr2 800mhz 1.8 v default 4-4-3-10

overclock: 2x 512 mb 2.4 volt 5-5-5-15 - 660.4 mhz
validate: http://valid.x86-secret.com/show_oc?id=209958

Crucial ballistix PC8500 :)

http://mekk.homeip.net/imagesharing/...4180faacb4.png

The startpost could use some updating. :p

It would be nice to mention what ram was used as well, i bet 75% will be Crucial.

LOL well at least I have some OCZ kicking, and I still think I can get close to 700 if I could be bothered setting a devider so I could ramp it up slowly. But might need more volts.

Yer front page update would be sweet.

Better add in my Transcend. 660 5-5-5-15 @ 2.5V on Gigabyte DS3R
Could go higher but board only allows 2.5V max :rolleyes:

yeah my boards max is the same :(

Highest and tightest super pi 32M passable memory clocks I've done to date thanks to DFI LP LT X38-T2R motherboard!

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

http://fileshosts.com/intel/DFI/DFI_...3m20s110ms.png

http://fileshosts.com/intel/DFI/DFI_..._bandwidth.png

2x1GB Crucial Ballistix PC2-8500 Tracer @675Mhz 5-5-5-9 at 2.55v

New personal best 32M passable clocks of 675Mhz 5-5-5-9 at 2.55v!

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

Click image for larger version below

Super Pi 1M

http://fileshosts.com/intel/DFI/DFI_...5ms_memset.png

Super Pi 32M

http://fileshosts.com/intel/DFI/DFI_...1ms_memset.png

http://fileshosts.com/intel/DFI/DFI_...everest_tn.png

2x1GB Crucial Ballistix PC2-8500 Tracer @681.5Mhz 5-5-5-9 at 2.60v

Bumped up vdimm and 32M @681.5Mhz 5-5-5-9 at 2.60v !

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

Super Pi 32M

http://fileshosts.com/intel/DFI/DFI_...8ms_memset.png

http://fileshosts.com/intel/DFI/DFI_...everest_tn.png

hmm i might wait for a rainy day (its summer here and always hot) and when its cool enough I might try for 700, I can get over 650 on 2.5v so 2.6 should get me close anyways. If they go poooof then so be it lol.

I wish I was still at sydney or melborne :( :(

I got this suicide clock with 2.55v, but currently it's only single channel as the other "half" is borrowed by my friend to finish his mainboard review..

just post this suicide first, will get back with the PI after I got back my other half. :D

http://teamreview.org/gen0img/TEAM_X...suicide255.jpg

it's still can do the Pi at 680 for the single, but I don't know if I have 2 sticks running.

anyway, this is the pi at 672 :) but still on single, got to wait for another pair :(
http://teamreview.org/gen0img/TEAM_X...GKIT/pi672.jpg

http://img232.imageshack.us/img232/92/4117tv2.jpg


2.5v :) Super Tallent CL4

Here my OCZ Sli Ready Edition 1066 @ 2.4V

http://www.abload.de/img/650mhzpidac.jpg

CPU was not highly overclocked for this test ;)


Edit:

Made today again some testing with 2.55V and SingleChannel :

High-FSB:
http://www.abload.de/img/663mhzboi.png

And low-FSB cause CPU was at it's end:
http://www.abload.de/img/675mhzmf5.png

Cellshock pc9200 @ 2,7v

http://www.pcxtreme.it/forum/imageho...aa86f6e2b4.jpg

Maybe ... i had to try 32m :D

http://www.pcxtreme.it/forum/imageho...aae2cc0d41.jpg

What mobo?

Maximus Formula :)

Wow Jungle beat, that is some awesome ram!! :shocked:

TeamGroup Xtreem DDR2 667 @ 675Mhz 5-5-5-15 ` 2.5v
E6600
Gigabyte DS3P

http://img255.imageshack.us/img255/5583/675yx7.jpg

My best run:

http://img138.imageshack.us/img138/6221/4113ld2.jpg

GB P35-DS3P rev1.0 vdrop mod pencil
E2160 :)
2x1GB Super Tallent DDR2 800 @ 1373 @ 5-5-5-15-2T @ 2.4v

Bulgarian Fastest E2160 :) All is water cooled!

Quote:

---

Originally Posted by mup0

...

GB P35-DS3P rev1.0 vdrop mod pencil
E2160 :)
2x1GB Super Tallent DDR2 800 @ 1373 @ 5-5-5-15-2T @ 2.4v

Bulgarian Fastest E2160 :) All is water cooled!

---

My old water cooling i suppose :rolleyes:
Very nice result m8 :up:
What weak are yours ST800?
Мine can do " only " 1280mhz 2.25V 5-5-4-10-4-35 ... pl7 not bad for promos edition:rolleyes:

I use 2.4v and 5-5-5-15 :) Others are auto :) Ammm tweaks i dont think that there isnt something about tweak :) Just good pair :)

Yes you water cooling ;P

Good Luck :)

Ran another time DC on the P5K WS @ 2.55V:

so:
CPU: E6300
RAM: OCZ Sli Ready Edition PC2-8500 GMH/GKX (?)
Board: P5K WS ; 2.55V

http://www.abload.de/img/660mhz5-5-4-10superpzxy.png

Looks like I've made the cut:

P5B Deluxe, E2140, Crucial Pc5300 On h2o

http://i245.photobucket.com/albums/g...itter/pi32.jpg

If I run single channel (1 stick) I can pass 8 hours of Orthos @ 300x10 1200MHz Mem DDR speed. That takes 1.5125 volts to the proc to get the memory controller to handle it though.

The setting below is also 8 hours Orthos stable (8 is good enough for me) and it also requires 1.5+ volts to the processor (Normally takes 1.3~1.35) to get it stable in dual channel @ 280x10 932MHZ DDR Speed.

Not bad for a AMD Box. The Memory is PC9600 Flex - I've only had 1 day to play with it. So perhaps I can do better with more playing. The limiting factor right now is the lack of CPU volts available. Since I'm running water I can give this little Operton alot of juice - Which it really wants when you start overclocking the onboard memory controller. I can run 1.5625 (Max Vcore for an Asus M2N32 SLI Deluxe Wifi) I temps barely sip @ 60C. Which ain't bad at all considering how much overvolting that is. If I can find a way to volt mod this baby I'm sure I could take a shot at this club :-).

P.S. Does anyone has a good Alpha Timing Table or something that you could post so I can see what the Alpha timings for the Flex 1200 are supposed to be. I don't think my board is detecting them correctly (Especially tRC @ 19!?!) - If anyone could post up a MemSet3.4 or 3. whatever screenie that would be great.

Sorry for hijacking the thread. Congrats to all you who made it.

See Ya,
Jealous AMD-Fanboy

Kidding! About the Fanboy part anyway.. I'm just poor.



http://img519.imageshack.us/img519/2...bdc9bi9.th.jpg

Why does memset say 666mhz and CPUZ only say 466mhz? Usually CPUZ is the standard checking tool, so that I dont understand.

When I am ramping up my frequency I relax tRC to 22, but for 24/7 use i tighten it up to 16.

I also noticed your tRAS is 18, I think thats on the EPP for these things, but I run 15 if I am CAS5 or 12-10 if I am CAS4.

It is micron D9GMH so look around at what other users are doing with they're RAM and try and find some memset shots, it doesn't matter so much if they're Flex or not, it what's on the inside.

@ Saturas - They're GMH, not a bad kit to. Not to expensive either.

CellShock 2x1GB PC8000 on Gigabyte P35-DS4 , 2,45V
all I could make in 30 minutes at work :p:

http://img259.imageshack.us/img259/2...000c4edsc0.jpg

Quote:

---

Originally Posted by The0men

Why does memset say 666mhz and CPUZ only say 466mhz? Usually CPUZ is the standard checking tool, so that I dont understand.

When I am ramping up my frequency I relax tRC to 22, but for 24/7 use i tighten it up to 16.

I also noticed your tRAS is 18, I think thats on the EPP for these things, but I run 15 if I am CAS5 or 12-10 if I am CAS4.

It is micron D9GMH so look around at what other users are doing with they're RAM and try and find some memset shots, it doesn't matter so much if they're Flex or not, it what's on the inside.

@ Saturas - They're GMH, not a bad kit to. Not to expensive either.

---

On AMD AM2 boards you have 4 mem settings DDR 400/533/666/800. So the divider is set to 666 bet the effective memory speed is 466(x2 for DDR) = 932. It's pretty good for a board that is supposed to max out at 800.

Listen guys, this is barely becoming an achievement anymore so I'll only be accepting 32m from now on. That ok?

sounds good to me! Heres a 652.7MHz run for ya :)

2.42V IIRC Crucial Ballistix PC5300

http://img142.imageshack.us/img142/9...cialhg6.th.jpg

Thanks bud. Just too many results now. :) Updated now. Omw that took FOREVER.

Maximus Formula
Ballistix 8500 1gx2
666.7Mhz 32M Pass 2.29v :D

http://cfs10.blog.daum.net/original/...e=8500New4.jpg

ASUS P5K WS
Ballistix 8000 2x512MB
668Mhz 32M @ 2.20V

http://www.abload.de/img/6672.2vbbb.jpg

And here @ 2.25V @ Prime-Blend-Test:
http://www.abload.de/thumb/6672.2558j.png

Quote:

---

Originally Posted by Zeus

Wow Jungle beat, that is some awesome ram!! :shocked:

---

lol, d9gkx and voltage @ rocks...

Insane ballistiX?
2,20 volts on bios.:clap:

Cellshock PC8000 on Maximus:

http://img.photobucket.com/albums/v292/Viss1/676mhz.jpg

680Mhz Mushkin XP2 9200@2.48v

Crucial Ballistix 8500 on Asus Commando

650Mhz 4-4-4-4 Spi1M :D

690Mhz 5-5-5-15

Quote:

---

Originally Posted by Monstru

Crucial Ballistix 8500 on Asus Commando

650Mhz 4-4-4-4 Spi1M :D

690Mhz 5-5-5-15

---

Verry nice, what are you feeding them ?

Quote:

---

Originally Posted by Monstru

Crucial Ballistix 8500 on Asus Commando

650Mhz 4-4-4-4 Spi1M :D

690Mhz 5-5-5-15

---

Sorry double post

Only 2.75v for my babies, I don't want to kill them...yet :D

Quote:

---

Originally Posted by Saturas

Ran another time DC on the P5K WS @ 2.55V:

so:
CPU: E6300
RAM: OCZ Sli Ready Edition PC2-8500 GMH/GKX (?)
Board: P5K WS ; 2.55V

http://www.abload.de/img/660mhz5-5-4-10superpzxy.png

---

Thats strange, i got a bit better results with worse clocks. memory 534, 3440.