Printable View
Quote:
Originally Posted by Movieman
one major problem. INternet access which would be needed to send out results is SERIOUSLY locked down if accessible at all. There are at least 3-4 different layers of security and rights that I don't have access to.
I am just a peon on this project.
Quote:
Originally Posted by Movieman
good point ;D i did hav ea dual 2.6 gig xeon under my desk untill a more "senior" admin decided he wanted it :slapass:
also, ive just bought some c1 1.6lv xeons ;)
After returning the Biostar TForce Conroe board, I picked up another Gigabyte GA-965P-S3.
I finally got it put together. Lapped the TT BT and the IHS on the E6400. Haven't pushed it at all yet, just haven't had the time. It is running at 2900-something, with plenty of headroom, I'm sureI have a non-stock fan on the BT and the rig has 2 gigs of Buffalo Firestix PC2-6400.
http://members.cox.net/vserl/resized...%20posting.jpg.
More work to go, a few rigs are not running. Changing things around, but I'm getting there.
Clover..clover..get to work!:DQuote:
Originally Posted by serlv
Was the TForce a bad clocker serlv? I was considering buying a cheap TForce and throwing it under cascade for some E6400 superclockig goodness. Wish I had a board capable of stressing my chip :(
Well, I lapped the IHS's and cleaned the heatsinks. Those Swiftechs have such a fine finish it looked good as new.Quote:
Originally Posted by Movieman
Opened the shipping package for the mobo and pulled the box out. Didn't bother looking at the mobo, I knew I wouldn't get to putting things together tonight.
I need to do the mods. Rob you have any tips on the technique you used to do that., I know the contact I need to cover. It is just so damned small, how do you cut a piece that small and actually place it?
Yeah, I couldn't do much with it, very frustrating. I returned it for a refund.Quote:
Originally Posted by gomeler
Others have done very well it though... Actually mixed. Some have, others have had problems.
I figured life was too short... :)
I just have to do this and then to bed:Quote:
Originally Posted by serlv
Scott: after what you were doing this weekend, I figured you'd be fine working with "tiny" items!:rofl:
use xacto knife with new blade and magnifying glass.
Sorry pal, it's late and on those mods, read your email I just sent you.
i have a Gigabyte GA-965P-S3 with an E6300 and a Crucial Ballistix BL2KIT6464AA663 kit :rocker: :rocker: setup.
it runs 3.3ghz on all stock volts. you should definitely be able to push that to 3.5ghz as long as the cpu is a decent batch and your RAM will go that far.
Quote:
Originally Posted by serlv
Here's my dedicated WCG cruncher. Not the sharpest knife in the drawer but still pretty decent :D
AMD64 Venice @ 2.69GHz - cooled by scythe katana with YS-Tech 92mm quiet fan (original is too loud)
2x256MB BH-5 2-2-2-5 1T @ 225MHz, 3.3Vrail mod
Biostar TForce-6100 M9 ghetto moded mobo :fact:
http://shrani.si/files/dscn34821100623.jpg
That is some awesome cable management going on there. that case looks empty. Crunch On :toast:
Well, It's hardly a "Farm", although I may be getting a stack of 3 Pentium 2/3 PCs from where my Mum works.
http://static.flickr.com/140/323359388_69dba86a80_b.jpg
http://static.flickr.com/138/323359386_5846760807_b.jpg
http://static.flickr.com/134/323359383_598f959b54_b.jpg
In the Pic is my Dell I6000 Dothan 750 with 1GB DDR2, and my Athlon 64 3200+ Newcastle. Theres also an Apple iBook G3 800MHz that is on loan!
Ruan
Haha that case is a beast ruan! :up: but what happened to running it caseless?
:toast:
Heh, yeah, I would run it caseless, although when I go to LAN Parties, caseless is not always the best :(. This case is great for LANs becuase it has wheels, its a 1995 Vintage, used to house a Dual Pentium Pro 200MHz. Also the parents were scared of going in my room when it was caseless, in case they either touched something, or got eaten by the Delta, so therefore it never got cleaned, so it had to go back!
Ruan
you guys are BAWWWLLINN!
haha, had to say that.
I currently rock my 2.8ht 756mb ram, I will be saving for a new system fo xmas` hopefully, if my need for low frequency audio equipment dosen't eat all my funds. (new sub)
little 6man lan in teh garage
http://img333.imageshack.us/img333/5...2006004bi5.jpg
anyone play 1.6 here?
http://img184.imageshack.us/img184/6411/1v1re5.jpg
cm-330!-main comp
http://i133.photobucket.com/albums/q...5/100_4133.jpg
http://i133.photobucket.com/albums/q...5/100_4118.jpg
http://img184.imageshack.us/img184/7...4055rm2kv2.jpg
p2 "frankenstein" build in my room
http://img177.imageshack.us/img177/104/06232006hr5.jpg
too much fun downstairs
http://img417.imageshack.us/img417/4...nstairspe6.jpg
this is how i unthaw my uncrustables, ima kill this gpu :p:
http://www.techspot.com/gallery/data/500/07142006.jpg
rofl wrxsean05, i was gona say! "is that a pie on your gpu"
no no , it's a pancake videocard cooling :)
The pie/pancake ownz, your garage looks like my little lan party set up over here in my bedroom..
I cant wait till i get my stuff back from storage and can take some digi pix..
Guys tell me honestly, how much do you pay for electricity, when you have 1**GHz of power? :slobber:
hey NoRogeR haven't seen you here before and don't see you on the team (are you using another name) welcome to the team man!!
Quote:
Originally Posted by NoRogeR
Well, I don't think I have 1xx GHz of crunching power, but I know for sure I pay way too much for power!
try living in N.ireland every thing costs loads more than it should
I don't have 1**GHz of power, but I just got my latest utility bill. It's high, but not outrageously high. I had bigger bills this past summer when electricity rates were higher. But I feel fortunate. A few people I know had summer electricity bills that were $500-1000. Mine were nowhere close to that. But it's hard crunching by candlelight.:DQuote:
Originally Posted by NoRogeR
http://www.threadbare.net/images/candlelightletters.jpg
sierra_bound, nice picture ;)
hipno6500, I'm watching you guys all silently, thanks for the warm welcome :toast:
Just added some coolers (had a overheating problem), new thermal grease and +300MHz power!
Why can't you see me? I don't have a lot of points, but still. http://img74.imageshack.us/img74/6672/untitledhh9.jpg
he man every wu counts!!!!! you just may get the one that cures cancer!! and every wu that you do is one less that we have to do to catch easynews. im not a major outputer myself but i still feel apart of this team. it's good to have you with us!!!
132.58Ghz, last electric bill was $395. 44 boxes 24/7:D
Nice set-up there. But is that for folding?:)
Nah, njkid32 is gonna help me how to set it up for folding soon. :)
Looking forward to you joining us.:)
Welcome to the team, Ashraful and Sombrio. Its' good to have more teammates!
Damn! You guys are toooooo neet! If I posted a pic I'd have you all in stitches!
Looks like a darned warehouse here.:D
No, it's suppose to look like a, uh, farm.:DQuote:
Originally Posted by Movieman
Ashraful, nice little dual comp setup with that glass desk, in that one pic, that's how i cool my 5600 with a frozen uncrustable. It's gone now and replaced with a 6800GT from An(an0nom0us).
lenght comparison
6800GTv5600FX
http://img293.imageshack.us/img293/3152/cardnq9.jpg
I almost had clearance problems with the ram banks, and the new hdd addedhttp://img331.imageshack.us/img331/2589/ewou8.jpg
Here comes the pain to some of you neatfreaks:D Sorry some of them are a little dark, the camera is a little overzealous sometimes.
Let's start with the network:
http://i87.photobucket.com/albums/k1.../IMAG00500.jpg
Black thing is my modem (SpeedStream 6520), then a D-Link di524, and that big thing with the fan grill that I dremeled out myself is a 24 port 3Com Superstack II:D (it was free too!)
From the doorway:
http://i87.photobucket.com/albums/k1...o/IMAG0045.jpg
Oh my, messy already? It gets better:eek:
Some stuff behind me:
http://i87.photobucket.com/albums/k1...o/IMAG0048.jpg
Main area:
http://i87.photobucket.com/albums/k1.../IMAG00046.jpg
South wall:
http://i87.photobucket.com/albums/k1...IMAG000461.jpg
:D
ps If you find 2 xboxes in one of these you get a gold star.:banana: (they're there too:) ) Also some of the stuff along the walls is my mom's (bookshelf/cabinet)
i can see them both:D
I see one :(
I WAS FIRST!! lmao, i found them, then started to high light them, which led to another M$ paint masterpiece by myself.
That's right sean, you found two of them. If you had xray vision you would have found the last one underneath my xbox on the floor:D. This is the wrong forum, so I won't get into those here.
This is my chopshop.
jspace
my mom sees my room like that and for sure she dies
Jeez.. perhaps a mess is the sign of greatness? Time to strew my little farm all over my room. Nothing like a computer for a bed partner, nice and warm.
WOw and I thought my space was a mess, im sterile compared to some of these shots :P
LOL @ jspace. I can only see one complete computer. I see about 5 more computers strewn across your floor. :D :D
All three running PCs are hidden behind that desk piece with the CRT and keyboard on it. The only outlets are on opposite sides of the room and both are pretty much full. I need to move some to the basement.
OMG...I'd not be able to remember where all the working stuff is, being that I can't remember what I'm looking for just going from the kitchen counter to the fridge :eek: ...creeping, NOT, of old age :fact:
:eek2: @ jspace i think my heart just stopped for a minute
created a home in my basement for the crunchers, went from this
http://www.imagecross.com/images/922STA70437.JPG
to this
http://www.imagecross.com/images/8704STA70441.JPG
nice setup man. you really cleaned up:D
Nice job, MarioMaster. Looks great! One of these days I might cleanup, but dam*, there is so much stuff!
You just need a bigger house!:DQuote:
Originally Posted by serlv
sounds like my room, even after i got all those computers out :)Quote:
Originally Posted by serlv
MarioMaster,
That green table sure looks like it won't hold the weight for a long time...
yeah i saw that, i used a leg from another table to prop it up in the middle, it doesn't bend anymore ;)
Here is my new "cruncher", going in the racks here at work. (Technically its my webserver)
http://www.retekdirect.com/images/Pr..._811I_F_AB.jpg
http://www.retekdirect.com/images/Pr...UPERO_811I.jpg
http://www.retekdirect.com/images/Pr...ERO_811I_I.jpg
Will be outfitted with 1.6ghz Xeons (unless i get some 2.4's), 2gb DDR400 Reg ECC, and 2x36gb 15k SCSI raid1.
What board is that wes? SM X5xxx?Quote:
Originally Posted by WesM63
X5DPA-GGQuote:
Originally Posted by Movieman
I'm not 100% sure if the 1.6's will work in it, but i hope so.
Ordering a new case for my mini-farm. You'll have to guess what's going inside it.:D More details later.
http://www.supermicro.com/products/c...SC743T-645.cfm
The 1.6's will..they are 603's correct(400FSB) and that board takes 603's and 604's..your ram will rin at PC1600 though if they are 400fsb cpu's not PC2100Quote:
Originally Posted by WesM63
I know!:rofl: but I ain't telling!Quote:
Originally Posted by sierra_bound
Just got these running, Should give me around 14k Per Day
E6400 @ 3.45GHz
A64 3700 SD @ 2.88GHz
Intel P4 @ 1.7GHz
Celly 735MHz
Celly 650MHz
Pic's to come soon:)....
Im getting there.....Slowly:cool:
Got some now
My main C2D Rig
http://img357.imageshack.us/img357/4908/dsc00719ra1.jpg
the A64 and 2 Cellys
http://img443.imageshack.us/img443/7795/dsc00720ja5.jpg
And finally, the P4
http://img357.imageshack.us/img357/3243/dsc00721td9.jpg
It's not much but it all helps! :)
hell yes it does. thanks for sharing.
But it's so neat and clean..You just have to get over this and soon!:DQuote:
Originally Posted by Bootup05
Thanks for helping pal! Appreciated!:toast:
The bottom one is dual socket 940 opteron 242.
The middle one is currently having some issues but it is AM2 X2 3800+. It's currently off line for fixes.
The top one is E6300 rig. I originally planned it to put in a 2U. But decided to do it a 4U in order to OC.
I have a 2U space left which is perfect because I have a spare 2U rackmount chassis. I am going to get some cheap Xeon or s940 opteron off ebay and build a cheap machine.
The E6300 rig will go online and Bonic-ing tonight and that will make my 4th rig for Bonic.
http://img444.imageshack.us/img444/7006/img1099ff0.jpg
Wow, that rack is sexy :D
My 2 PCs (E6600 and Celeron D 345) are currently crunching, and..
http://xorgcfg.googlepages.com/DSCN2876.JPG
I just bought another case today (yes, I bought the same case because I am in love with the Eureka case.) That'll be a Kentsfield system, and running WCG. :)
loving the rack setup so clean
http://img20.imageshack.us/my.php?image=img2845oi6.jpg
http://img75.imageshack.us/my.php?image=img28526ks.jpg
my newest toy:D the opty 148
http://img113.imageshack.us/my.php?image=img28506bp.jpg
http://img362.imageshack.us/my.php?image=img28519rg.jpg
the p4 2.4 soon to be 2.6 i hope:D ;)
http://img241.imageshack.us/my.php?image=img28464ug.jpg
4200x2
http://img258.imageshack.us/my.php?image=img28482yv.jpg
http://img176.imageshack.us/my.php?image=img28496sl.jpg
my rig in sig
edit: i forgot most of them oppps.
http://img444.imageshack.us/my.php?image=img28570by.jpg
i have a few more rigs around the house and a bunch at my dads work that i will get pics of latter.
I suppose I know what you mean by that?Quote:
Originally Posted by hipno650
yes i think you do:DQuote:
Originally Posted by alucasa
Quote:
Originally Posted by Ashraful
:) at Ashraful. I have two Eurekas, also. Mine are black. Averaging six cores per Eureka. Hopefully going to 8 per, soon.
Henderson, TX
200 acres
mostly subsistence farming and cattle
...
http://resume.jbhfile.com/temp/farm.jpg
...
still in the family but currently nobody maintaining it. pasture land rented out to a neighbor.
...
..
...
..
...
(i sincerely apologize. i've laughed myself to the point of tears.)
resident mod, feel free to delete at your leisure ... i mean, once the shock-wave diminishes.
(it's true, though; that's a legit shot of our family farm; when i first saw the thread title i had no idea it had to do with folding and was so excited because i thought i might be able to talk about my favorite childhood weekend haunt ... so ... in the end, had to post it anyway.)
all in good fun.
:toast:
It looks like it is going to charge.. but I sure would love to make that cow into some steak :) Wish I had 200 acres of land, I could do so much stuff.
(can't stop laughing)Quote:
Originally Posted by gomeler
...
i'm pretty sure that's a heifer, ... which usually won't charge, but glad you could see the humor in my post, otherwise.
:)
Yeah, I saw your Eureka's in the other thread. :)Quote:
Originally Posted by serlv
The 1U supermicro i posted a while back is going up here soon, as soon as the hard drives arrive for it.
On another note, i just picked up a PC-DL (Thanks big deel) and a set of 2.0ghz LV ES Xeons. When i finally get internet again at home that will go online along with my Pentium D 820.
good to hear man!!!!Quote:
Originally Posted by WesM63
WES! EMPTY YOUR PM BOX!:DQuote:
Originally Posted by WesM63
Quote:
Originally Posted by Movieman
Sorry i'm a popular guy!
Finally got my room cleaned up, lots of room for more boxen. Now i just need the net..
http://www.needmoreboost.com/wes/newroom-1.jpg
http://www.needmoreboost.com/wes/newroom-1des.jpg
here is a pic of the ones at my dads work
http://img337.imageshack.us/my.php?image=img2863dn3.jpg
Quote:
Originally Posted by hipno650
are those 'yours' and are they running bionic?
Are those optiplex/poweredge dells also running WCG? :DQuote:
Originally Posted by hipno650
well some are donations form them that they let me put on the grid because they have no use for them anymore. so they were gifts to me. and yes the run bionc on linux (ubuntu) and it sucks because they score very low and i could get another 1k-3k per day on a better linux client. they are all old intels p3s and celerons.
as for the servers the poweredge on the right was just donated to me but i need ram and a vrm (i posted in the scrap parts section and have the vrm incoming and if mm gets around to it ram as well:D ) but the other one is not sadly but i do have some lappys and work stations running when they are not using them (overnight)
Well heres my little farm - I know, I know, its far too neat and tidy :D
http://www1.upload3r.com/img/63130179.jpeg
The two Antec P180's far left contain Kentsfields, the two stacked next to them are X2 3800's, the two far right in the Thermaltake Sopranos are E6600's and the sad little one on its own is my old trusty XP2000 :toast:
Quote:
Originally Posted by Adywebb
wow... i must say i really like that, looks like the idea ive got for my farm ;D
i must get round to posting pic's of my pc's at work running bionic
i could use some of those dual cores in my rack :DQuote:
Originally Posted by Adywebb
:shock: hands off :slapass: - there mine all mine muhahahahah :D
Wow, extremely nice setup! Clean too! I bet that little area gets quite toasty. :DQuote:
Originally Posted by Adywebb
Well I haven't needed any other heating in there this winter thats for sure :DQuote:
Originally Posted by NickS
Only moved here a few months ago, so it will be interesting to see how the Summer temps affect things - may have to get an AC unit, especially when the dual clover gets sorted :woot:
Heres a pic of my machines at work running bionic....
http://img162.imagevenue.com/loc3/th...42_122_3lo.JPG
on the left a 2.8gig p4 - 1gb ram and on the right a 2.0gig p4 - 512mb ram
the 2.0gig is soon to be replaced with my personal dual opty 250 with 2gb ram :woot:
the reason that the opty is being brought to work is so that i can run it 24/7 ;-)
what are you going to do with the old p4?Quote:
Originally Posted by Origin_Unknown
Quote:
Originally Posted by hipno650
technically it still belongs to my work so ill probably keep it running bionic ;-)
thats good:)Quote:
Originally Posted by Origin_Unknown
Eggcellent! We like duallies here! What does a 250 run at, not familiar with it?Quote:
the 2.0gig is soon to be replaced with my personal dual opty 250 with 2gb ram :woot:
the reason that the opty is being brought to work is so that i can run it 24/7 ;-)
Quote:
Originally Posted by serlv
2.4gig :woot: going to be sticking it in a nice big server case so i can get some oc'n on the go :banana:
we also like ocing:D and dualies and ocing:D :D let that sucker rip man you should be able to hit at least 2.8ghz more like 3ghz