conroe fsb wall hacking. please help

hmm my e6300 had a 480fsb wall, and I remember a few other people with e6300 having a 480fsb wall as well. x7, x6, x5, all walled at 480. Too bad I didn't know about the mod eh?

Quote:

---

Originally Posted by little_scrapper

yes! I was waiting for someone to mention the E4300 finally. Its all I could afford and on my DS3 rev3.3 I hit the FSB wall of around 370-375 REGARDLESS of the multiplier I used. And, I have read literally a hundred or more threads regarding this combo and I have come across exactly TWO people that have been able to got a E4300 to do 400 or more on the DS3. Where the E6XXX wil do 500fsb no problem on a DS3. I basically gave up on my E4300 and put it back to stock for quiet low power tower, when I can afford to I will try something from the E6XXX line.

If anyone feels charitable and wants to trade me a E6300 for a E4300 just let me know. Seriously, anyone want to do some testing on a E4300 and has a 6300 lying around Ill trade. Mines like a week 43 or somewhere around there.

---

I have the same problem. E4300 on a S3 rev 3.3 I can't get over 370. To even get 370 I had to set PCI-E freq to auto. What is this memset mch bar thing?

btw, new here.:wave:

This only works on the E2XXX and E4XXX serie ;).

http://i60.photobucket.com/albums/h1...r/200to333.jpg

And this maybe handy ;).

http://tweakers.net/ext/f/cdaf1e9144...e2952/full.jpg

I tried the 333FSB mod on my E2160, but it didn't go like i wanted. So i don't know if it works ;) .

Quote:

---

Originally Posted by Prodigys

This only works on the E2XXX and E4XXX serie ;).

http://i60.photobucket.com/albums/h1...r/200to333.jpg

And this maybe handy ;).

http://tweakers.net/ext/f/cdaf1e9144...e2952/full.jpg

I tried the 333FSB mod on my E2160, but it didn't go like i wanted. So i don't know if it works ;) .

---

So this will get me over my motherboards wall?

Is it ok if I connect the vcc and vss together with the bsel1 and bsel2 together like this:

[IMG]http://i164.photobucket.com/albums/u.../200to3331.jpg[/IMG]

After several bios updates on my Asus P5N-E SLI board, the 1066FSB BSEL mod finally works on my E4300, I've keep the mod on the chip for months now and it has never made any difference to my 375MHz FSB wall, not 1MHz higher.

After update to bios 0608 the FSB is at 380MHz tested fully stable, only 5MHz increase but better than nothing I guess, removing the mod results in the same 375MHz FSB wall confirming that it does work with the latest bios.

I've not tried the 1333MHz BSEL mod as the space between the two traces are so close together it's difficult seperating the traces even with tape over one line of trace to paint the outer line.

The new bios for the S3 (F12) brought my OC down from 369 to like 359. I sort of think it may be the vdrop but I don't know how accurate CPU-Z is. I may get a cheap multimeter or something. Any suggestions?

It could just be that I got a not-so-great board.

Quote:

---

Originally Posted by crimz

So this will get me over my motherboards wall?

Is it ok if I connect the vcc and vss together with the bsel1 and bsel2 together like this:

[IMG]http://i164.photobucket.com/albums/u.../200to3331.jpg[/IMG]

---

I doubt it if you can do that :p: .

But i saw the 33 mod picture in the beginning of this topic and there they did connect BSEL2 to VCC to get a 333FSB, but mine picture is different...

If i somehow get a good conductive pen to mod my cpu i will try it...