Has anyone tested max CL3 results with a P5W yet?
Has anyone tested max CL3 results with a P5W yet?
Can anyone post some results from the Cellshock 6400 C4 ?
German hardware-forum:
http://www.forumdeluxx.com/forum/sho...d.php?t=267510
This thread is only for Cellshock memory, go in and find out...:)
Thanx for the linkage :)
I couldn't ran CL3 @ DDR2-800, @ DDR2-667 it run without problems. My rams are the DDR2-800 CL4.Quote:
Originally Posted by Fr3ak
Hi IcyRocket do you know if the company you got your ram from will export as i would like to buy someQuote:
Originally Posted by IcyRocket
Quote:
Originally Posted by andyr(uk)
http://www.memory-configurator.com/p...kit/index.html
buy them here :D
MSC (www.msc.de) will not sell the CellShock (www.cellshock.eu) modules directly to end-users - so please check where else you can get.
You can also find links to relevant vendors on our homepage ;)
I want that memory even i am with Dominators now... :confused:
Cheers for the link GrimReaper i think i will be buying on Friday the C4 800 stuff from my local shop, only the prices in Germany are far better than in the UK :(Quote:
Originally Posted by GrimReaper
hehe good luck buddy, if you dont find them there UC UK have them in stock ;)Quote:
Originally Posted by andyr(uk)
Mine Cellshock DDR1000 CL4 is in shipping now :D (from mem. conf. of course)
For those lookin´for some nice CellShock 1000C4 based on Micron D9GKX we have a special promotion offer to be found @
http://www.memory-configurator.com/p...kit/index.html
If you like to order please use the following promotion-code: CYBS-F09X
The price will then be 307.- € excluding VAT so you can safe 20.- €
Shipping to US is 10.- €
;)
you couldn't offer this a few days ago?! :( could've saved me 20euros... :slap:Quote:
Originally Posted by Alonso
I'm so out of luck... :fact:
QUOTE=Alonso]For those lookin´for some nice CellShock 1000C4 based on Micron D9GKX we have a special promotion offer to be found @
http://www.memory-configurator.com/p...kit/index.html
If you like to order please use the following promotion-code: CYBS-F09X
The price will then be 307.- € excluding VAT so you can safe 20.- €
Shipping to US is 10.- €
;)[/QUOTE]
:slapass: Should have told us earlier :( I spent like £270 on a pair last week. I haven't got any other kit to compliment them yet. ASUS Striker on order from Amazon US and Xeon 3060 is only £170 in UK.The memory came well wrapped but the actual plastic packaging was cracked as if they'd been tossed around/dropped in stock room:confused:
For me they came packed very well in a much larger box bubble wrapped
out of the two kits that I ordered one of kits the plastic outer pack was cracked a bit on the side. :fact:
I think that happens, but the memory works fine :D
edit- on a a side note the marketing guys at cellshock really needs to improve the packing of this memory without increasing the price :p:
hehehehe I reckon they must have dropped the whole box ( was it on the left side?) the memory seems undamaged and I'm sure it will work fine.
Today I just recevied mine:
...
Tryin to kill 'em quick eh? :rolleyes:Quote:
Originally Posted by srkiller
What's the voltage?
2.3v
No way... Those would be possibly the best D9 sticks ever...Quote:
Originally Posted by srkiller
2.3 holy cow! :eek: can you please post a SPD pics? What week are they? :stick:Quote:
Originally Posted by srkiller
Wait a second, I totally forgot that he hasn't run any sort of stability tests. So the results are good, but until I see Orthos ram test, they only mean he can run sandra at this speed...
I just started to play with it, I will post final results in a day or two...
Here is the current state of quick stability test (I hope it will remain CL3 to about CPU FSB wall ~517MHz :) )
Can you post a picture of the memory SPD? :D
Yes, but i dont see a point :)
Are you sure it is 2.3V???????Quote:
P5B-E vmem moded
It doesn’t make any sense to me
you have the reprogrammed SPD with epp support maybe this helps someway in overclocking? :confused:Quote:
Originally Posted by srkiller
http://img86.imageshack.us/img86/6453/cellshock1un3.jpg
these are the ones I have ;)
I think a guy somewhere said something like that but any way that should help in booting onlyQuote:
Originally Posted by GrimReaper
It's 2.3V for sure, I use a multimeter only ;)
Nothing really changes if I turn the 2.6V...
You have to use an nVidia chipset based motherboard to feel an advantage of EPP. The EPP is useless with boards based on non-nVidia chipsets absolutely.Quote:
Originally Posted by GrimReaper
Post a shot with AISuite open to show vdimm and it running orthos on the memory and a shot of cpu-z timings.
AiSuite show maximum bios Vmem for this board, true value is 2.3V
How about Orthos + SPi32M parallel...
Im done, this memory rocks!
this memory rocks
:clap:
I wonder how the CAS5 perform.
Should receive mine in 2 days or so .Will elt you know what I think when they arrive ;)Quote:
Originally Posted by nicepun
I've got the c5 kit, i'll post some screenshots up tonight, I'm up to 1200mhz, 5-5-5-15, at 2.25Volts. Prime95 stable for 13 hours as we speak. I haven't had a play with the timings, though I'd like to hit 1300mhz ;) Highly impressed so far!
CPU-z shot coming up when i get home!
RwD
Wow! 500MHz 3-4-3-8 .... DDR timings on DDR2 :eek:Quote:
Originally Posted by srkiller
:clap:
Very nice! Keep us updated... :)Quote:
Originally Posted by Rinsewand
http://www.rinsewand.co.uk/gallery/a...Hunter_037.jpg
apologies for the huge screenshot!
had to up it to 2.3v on the ram, 1200mhz, 5-5-5-15. Will try for more when i can get a fan blowing on it!
EVGA 680i
BFG 8800GTS
Cellshock 2*1Gb PC8000 C5
RwD
Screw it, I'm going to beat my bank account into coughing up the dough for some of this stuff. Is the 1000 c4 worth the extra cash over the c5?
EDIT: Nevermind, I just went ahead and ordered the C4. And if anyone else is thinking of ordering, now is the time to do it. 7.5% off with code DF35TA. :D
WOW, this memory is awsome. I'll have to learn about memory timings more before I get rid of the gskill hz's. 4-4-3-5 @ 500mhz+ makes me happy. My memory scores are MUCH lower with my timings being very close. Any advice on what timings to use to get higher bandwidth scores?
just for bench but awesome at 2,45vdimm :stick:
http://img442.imageshack.us/img442/582/pi9xt.th.jpg
bye
There is no such D9 that can do DDR1000 tCL @ 3 with 2.3V, period.Quote:
Originally Posted by EnJoY
That is just some sort of a bug.
Yes, I have shown a while ago how one could possibly claim impossible CAS3 clocks on P5B Deluxe. All you need is Memset. There is NO WAY any currently known IC would do DDR2-1000 CAS3 with only 2.3v, especially ORTHOS stable :rolleyes:Quote:
Originally Posted by The Stilt
http://www.xtremesystems.org/forums/...ug#post1742681 plus some screenshots I made two posts down...
Even @ 2.7V but stable
Never seen such thing
Wow, Those rams you guys got was godly. I received mine a week back and it dont seems to be behaving so perfectly.
My rams specification on was a 2.3v instead of a 2.2v on the sticker behind it. BUt i have tested 2.2 on default specs and it boot. Even with 2.4v i dont seem to be able to clock at 1200 @ CL4 :(
did anyone say all 1000 do 1200? tried 1200C5? a good mainboard (for example i680), psu etc. is also needed to reach stable 1200MHz RAM-speeds.
btw. we lifted specification for all CellShock DDR2-1000 series to 2,3V also for the former ones sold with 2,2V on sticker ;)
I had a pair that did 580 max at cas4 (only stable enough for 1M) and even at cas5 600mhz wouldnt work. Same setup/settings me 2GBHZ does 613mhz on. Some of the older kits seem to do a lot better but whats new ;)
ahh, good to know about the 2.3 volts! I'll stick some more through it when i get back to uni! Any recomendations on ram coolers? Mine seems to be getting a bit toasty at 2.2volts...
RwD
I have also orded some: Shocking Cells @ 1000C4
I'm dreaming of some cherry sticks. :D
Maybe I better schould take the: Corsair Dominator 8888 but's a bit overpriced imo. € 580,- / $ 749,- :shock2:
Results coming soon.......
lol your AI Suite is showing 2.1vdimm heheheQuote:
Originally Posted by srkiller
so what is the real vdimm measured by DMM and did you set those RAM timings in bios
p.s. what's that in your avatar?
But i believe its still a GKX chip? Yes i tried CL5-5-5-15 with 2.4V on P5WDG2 WS Pro dont seems too boot :stick:Quote:
Originally Posted by Alonso
975X chipset is limiting the overclock.Quote:
Originally Posted by Cytoplasm
It is extremely hard to get 975X running at DDR1200.
yeah he needs a 680i or a decent P965Quote:
Originally Posted by The Stilt
but no need to run 1200 with 975X just tighten the timings...it likes that more anyway :)
nothing @ all ;)Quote:
Originally Posted by loc.o
My: Good Ram Pro with D9GMH chips does:Quote:
Originally Posted by Cytoplasm
4-4-4-5 @ 990 / 2,42v
3-3-3-4 @ 780 / 2,42v
4-4-4-8 @ 900 / 2,00v
4-4-4-8 @ 980 / 2,24v
On the: Asus P5WDG2-WS Pro mobo.
Real voltage, checked with multi.
I will try the Cell Schok on the: Asus Commando and my V-modded: P5WDG2-WS Pro. :)
I ONLY "believe" Cas 3 and high frequency on 975 chipsets after ALL these benchies I've seen from time to time from different users with 965s.....Quote:
Originally Posted by The Stilt
975 and Cas 3 - show what you got/get.....;)
have you try up TRD.. this chip or the P5WGD2 like high TRD... ( 8 at mimimum.. perhaps 9), and it's seems higher you go.. higher this value should be.. Try too up the TRFC to 42... Perhaps it will help..Quote:
Originally Posted by Cytoplasm
These are my Cellshock DDR2-1000..
http://img63.imageshack.us/img63/8334/okfn1.th.jpg
BY;)
^ how much Vdimm??
... also, what Host Clock Frequency (or "strap" if you will) are you on, 266MHz or 333MHz? Keep in min, that CPU-Z is still not reporting memory frequency correctly when it comes to "Host Clock" other than default on XBX and XBX2.Quote:
Originally Posted by dj883u2
Would you mind running it again and adding Intel Desktop Control Center to your screenshot, please? This is the ONLY monitoring software that will show correct memory speed when on 333MHz (1333).
What I'm trying to say, when you come and claim such a high 32M stable OC on RAM and CAS3, you need to give us ALL the details, not just a link to a pic and no word, if you know what I mean ;)
Thanks!
actually i am not impressed anymore with Cas3 any more people usually don't boot with it but change it from Windows
2.65VQuote:
Originally Posted by GrimReaper
BY;)
lol !!! :eek: :eek: :eek: :eek: Holy :banana: :banana: :banana: :banana: ! thats way too much.. unless you want to kill your ram :stick:Quote:
Originally Posted by dj883u2
Quote:
Originally Posted by bachus_anonym
hello, what program to see the real memory frecuency in a 680i mother? thanks and sorry im spanish
bye
As long as people are very honest about how they get there, and document their result with detais, I'm personally fine with CAS3 :)Quote:
Originally Posted by kemo6600
I'm not trying to be a wisea$$, but 2.65v is most likely much too low for SPi32M stability at true DDR2-1050 3-3-3. You'd need an extraordinary set of RAM and around 3.0+v on RAM, to be stable enough for 32M.Quote:
Originally Posted by dj883u2
Would you please answer my little request from my post above, please? I'd appreciate that :) I have no problem with being proven wrong, though :D But keep in mind, you'd be the first one to show this type of stability at CAS3 and such "low" volts...
Thanks for understanding!
or if they are using AM2 :DQuote:
Originally Posted by bachus_anonym
GrimReaper, gimme a break. yes, 2.65v will degrade micron chips over time, but there are sooooo many variables that factor into this. besides, don't make you remind you the name of this forum... ;)
http://www.eclipseoc.com/image/balli...-4-3-8-32m.png
let's just say that those sticks (and two other kits) have spent a loooot of time over 2.6v for benching. i haven't noticed any degradation yet.. :toast:
The beacons gladly, but the program Intel Desktop Control Center mother does not work with the card!Quote:
Originally Posted by bachus_anonym
http://img442.imageshack.us/img442/4333/oklq8.th.jpg
The frequency of the ram is that one indicated from cpu-z.
The ram, they are truly spectacular!
The ram, they make the boot from bios and they have not been set up after in Windows.
A new result:
http://img250.imageshack.us/img250/8822/wrtk9.th.jpg
The V.Dimm at 2.8V on the bios. 2.8V it is the maximum impostabile voltage from bios for bad axe 2.
By;)
HI pepole i also have the cellshock 8000 c4 and COMMANDO and i would like
to get from you ,EXPERTS , ALL the timing of this memory that i need to know ,
so my board could hit the golden 560fsb (timing + volts ) .
with my corsair 8000ul the board hits 525fsb , :slapass:
SO , i hope with this mem it would hit fsb560+
(with SS phase change-cpu & extreme spirit 2 - NB) .:confused:
No way in hell that could have been correct :PQuote:
Originally Posted by dj883u2
I got better time with 500x7 4-4-4-8 on a E6300 with its lousy 2MB cache on 965P 1333 xD
Maybe you booted with Cas4 then memset your timings in Windows, but it's a memset glitch because Cas won't change to 3, even if CPU-Z shows it's 3.
/chokes on his orange juice...Quote:
Originally Posted by IcyRocket
I think ill be getting these pc8000 cl4.
Quick question about these ram and ram in general: has anyone taken of their heatspreaders and put on some as5(or similar)? Is it safe? Will it improve heattransfer?
We already use very good Dow Corning paste - no need for voiding warranty and exchange to AS5 or similar ;)
Ah so no improvement to get, thats good news, thanks :) Prices are good here in little denmark btw <3 cant wait ^^
Link plx?Quote:
Originally Posted by Rava6e
Quote:
Originally Posted by Alonso
Haha you get that from midland?
:p:
I go to school in the town of the dow headquarters :) Not relevant to this thread but kinda cool for me lol.
My PC everyday config : >
Cellshock @ 1000 4-4-4-4-30-10-10-10-10 (did not optimize last ones, but they go 3-10-5-10 with no problems)
Stable OCCT tests
That's CellShock PC6400 4-4-4-12 @ PC8000 4-4-4-4 @ 2,2v
http://img221.imageshack.us/img221/2...tledvr2.th.jpg
Regards :)
@ Revv23
German Distributor ;)
I'm coming up to Germany as you now for Cebit....Quote:
Originally Posted by Alonso
I want a pair of 1000C4 ones BUT YOU MUST peak me a GOOD pair......Just for me.......:D :p:
i know -and i´m already waiting for you :)
when will u arrive in hangover?
first of all i think we should have a good german beer before talking about memories ;)
I'll be there at 14th......and I don't drink.......BUT I'll drink for you.....:D :toast:Quote:
Originally Posted by Alonso
Ya know I have been thinking about some of this Ram German People take utmost pride in their work and have produced the best tools I have ever owned to date! Hmmmmm $325.00 @ Tank Guys....hmmmmm what to do what to do?
good but my simple G.Skill GBPK 6400 doing DDR2 1000 at 2-3-3-3 @ 2,3 Vdimm
check here
http://www.xtremesystems.org/forums/...&postcount=119
Good.........BUT your latency is a bit TOO HIGH...... ;) .....Work with it.......Maybe Cas 2, is accualy a Cas 6 or 7 or who knows..... ;)Quote:
Originally Posted by hersounds
lol, the pictures of the celebrities are awesome hahah :toast:
the 2-3-3 was faster than 3-3-3 but i also doubt that it was really cas2.
but 3-3-3 1000 with 2.3v would be very nice indeed!
but the performance doesnt match 3-3-3 i think... are you sure its running those timings?
Hmmm wondering should take plunge or not to take plunge:rolleyes: I wonder if they will even work in this DFI P35?
is there a problem on the dfi p35 with mem compatibility?
Hmm, my 4x512MB GoodRAM 800C5 (D9GMH) work at 1000 4-4-4-12-25-10-10-10-10 at 2.2-2.225V on P965 or at 1000 4-4-4-12-17-25-5-11-5 on 680i. Well i switched to Promos anyway since my old Goodrams couldn't cope with 1T command rate anyway. Will buy myself some D9GKX or. DQW (anyone???) if possible.
I see some Crucial Value D9GKX, anyone run them 1T? Do they work OK? I've tried Crucial Value D9GMH but they don't go over ~ 910 1T, Promos does 950 4-4-4-15 1T on eVGA 680i LT SLI @ SLI.
are you sure its the mem that prevented your from running at? 0_o
did you check the subtimings? tried another spd?
i dont think its was the mem...
@Saaya....I do not know I don't think there will be! There is a guy with same Ram running on DFI P35 so I guess not. I am prepping up for my order from Ben at Tank Guys waiting on stupid Pay Pal form but ...ya ..they look promising:)Quote:
Originally Posted by saaya
Ive tried Supertalent, Crucial Value, Crucial Balistix, Mushkin SPD tables, noone seem to gain me 1T stability. The very last edge of GoodRAM PRO D9GMH memory was about 740MHz (SPi32M), 700MHz (Memtest).Quote:
Originally Posted by saaya
well im pretty sure its your chipset that limits you from running 1t. did you try more chipset voltage and better nb cooling?Quote:
Originally Posted by tiborrr
I've replaced the original cooler with TR HR-05 a long time ago. I've tweaked the memory now, it is now capable of running 485 4-4-4-x 1T (Crucial Tracer PC6400) and 450 4-4-4-x 1T (Promos 90nm), but GoodRAM Pro still wouldnt post over 425 at any given latency/voltage. The key to success layed in the secondary timings table.
Is it possible that GoodRAM 800C5 had some bad yields that weren't capable of running 1T. AFAIK command per clock did not depend on the memory type, it was more of a chipset thing. Strange phenomenom :D
Quote:
Originally Posted by saaya
WWe have spoken already and yes ther is compatibility problem with D.F.I P35 and Cell Shock Ram:mad:
(old update:D)Quote:
Originally Posted by Brother Esau
i've already talked about this with saaya, and interesting but my kit rocks on DFI P35, original spd!
http://fercsa.com/bala/cellshock1000c4.jpg
http://www.fercsa.com/bala/cellshock.png
(time and cpu voltage doesnt matter, just focus on ram clock & vdimm)
Nice voltage for 600MHz CL4 indeed.:up:
very nice!
it seems it was a bios problem after all?
goo to hear that oskar was amanged to fix the problems :D