The 2x1GB/4x1GB/2x2GB/4x2GB DDR2 OC Database!

| 2x1GB DDR2 Category:

TeamGroup| andre X_X | Xtreem TXDD2048M667HC3DC | DDR2-667, 3-3-3-8, 2.2v | Micron D9GMH | CPU-Z Validate! & SuperPi 32M Stable! @ DDR2-1230, 5-5-5-12, 2.77v


http://img158.imageshack.us/img158/3...277vuk1.th.jpg

DB Updated.

californian7856: I need two instances of super pi 32m or orthos.

I'm gonna have to reclaim my #1 spot in the coming week :P

by nextweek i'll received my cellshock :D

@andre X_X : Show your Cellshock with High Perfomance....I ll wating

I need to toss my Cellshock's back in for some high clocks. =) In fact, that's what I'll do today I think. :)

DDR1300 w/ only 2.4v 5-4-3-10-2T! :D

I just updated the db, and I now am in the top spot! :toast:

My cpu-z validation will have to wait. For some reason it's not letting me submit it.

4x1gb on AM2 :woot:

Crucial / TeamGroup | Ozzimark | Ballistix PC6400 / OPB ED II 9600 | DDR2-800, 4-4-4-12, 2.2v / DDR2-1200, 5-5-5-15, 2.35-2.45v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1164, 5-5-4-7, 2.45v

http://www.eclipseoc.com/image/memory/4gb-582.4-32m.png

Crucial | Jmax_oc | Ballistix PC8000 / EPP | DDR2-1200, 5-5-5-15, 2.2v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1335, 5-5-4-5, 2.45v

http://jmax.oc.free.fr/Mes%20Meilleu...390%204005.JPG

DB Updated.

- Intel C2D E6400@3200MHz~1.2750V load 1.216V
- A-DATA Vitesta Extrem Edition 800+ Micron D9
- 2*1GB DC Kit
- Stock speed: 800MHz 4-4-4-12 2.00V
- OCd: 1000MHz 5-5-5-15 2.25V
http://xs314.xs.to/xs314/07174/superpi.png

Quote:

---

Originally Posted by Dumo

http://img58.imageshack.us/img58/763...shot003iw6.jpg

---

Wondering what that voltage monitor application is in the bottom right (blue app)?

dodjer420, that is ASUS PC Probe 2

Quote:

---

Originally Posted by laragirl83

dodjer420, that is ASUS PC Probe 2

---

Thanks laragirl, is it accurate?

Laragirl, sorry for the late response but in order for your result to qualify for the database, you must meet all requirement as per the rules in my first post. You've only ran a single instance of super pi 32m, but you have a dual core processor and therefore must run two instances to qualify.

Nobody for the 2x2GB yet? Here's one then ;-)

Stock: 533MHz 5-4-4-12 2.3v
Overclocked: 600MHz 5-5-5-18 2.5v

Mushkin 4GB XP2-8500 @ 600MHz stable. It might go higher, but I considered 600MHz to be lucky enough.

http://deathspawner.net/etcetera/pic...2.5V_thumb.png

System was:

E6600 @ 2.70GHz, eVGA 680i (P27), Mushkin 2x2GB PC2-8500, ASUS 8800GTX
Corsair Nautilus Water Cooling, OCZ GamersXtreme 700W, Corsair Airflow Fan (Ram)

Stability was tested by first running a 3D Mark 06 system run, followed by an hour of Prime95 on each core, Super Pi 32M and finally MemTest for Windows over the course of about 8 hours.

http://valid.x86-secret.com/show_oc?id=197725

I have a 4 GB of thet early Aenon DDR2-533 memory (two individual sticks 2 GB each).

At 1.9 volts set (in BadAxe1, so who knows what I actually get) it does:
- runs 4-4-4-12 at 312 * 2 = 624 MHz
- runs 3-3-3-12 at 367 * 1.5 = 550 MHz

Doesn't like 2.1 Volts, doesn't like 5-5-5-14.

The box doesn't run Windows, so no fancy screenshots :)

e6600 @3.7 ghz @9 multi @ 411fsb 1024 mhz

Guys, please read the rules before trying to submit your results.

One instance of either prime or 32m for each core on your CPU. A cpu-z verified validation from the latest version of cpu-z available. Full specs of the modules, and full stats before and after the overclock. If you do not follow these rules, I cannot post your result.

Here's my CPU-z for an earlier post then.

http://valid.x86-secret.com/show_oc?id=197725

I'll edit my entry with the other information. What if we don't know what chips are used?

Quote:

---

Originally Posted by Deathspawner

I'll edit my entry with the other information. What if we don't know what chips are used?

---

If you don't know what chips your memory has and you can't easily find out, I'll most likely be able to find out through a little digging.

I got 2 of these kits for 4x1GB
F2-6400CL4D-2GBPK
Not overclocked but 5-4-3-5 at 800Mhz, havent went for lower. I cant do the first number a 4 because my mobo hangs on boot.

Cellshock PC 8000 cl 4 2.2V @ 5-3-3-9 2T /5-4-4-9 2T 12XXMHZ 2.4V:)

ahh finally made it workin' fine!:clap:
A-DATA PC8500 Vitesta Extreme Edition 1066+
running now in 1:1 divider with CPU (500MHz FSB) at 1000MHz cl4-4-4-12 ~ 2.25V:up:
http://valid.x86-secret.com/show_oc?id=200238

OCZ's Titanium DDR2-800 didn't make it on the Intel 1T list? It's working pretty damn well on a friend's machine :)

ASUS P5N-E SLI (650i)
C2D E6420
OCZ 2 x 1GB DDR2-800 Titanium EPP (OCZ2T8002GK).

- lk

-edit-

this is DDR2 database!

Hi!
i would like to know something about my mobo/ram combo.
is that normal that if i want to run the divider 4:5, when CPU running at 400MHz FSB, so i can get RAM speed at 1GHz, at this setup, default timings set to cl5-5-5-15, and it requires 2.35V to run "properly", sayin' this because its not stable, i mean i can test, run orthos, super pi, goldmemory and stuff, but time to time, machine locks up, or after a reboot i got the 1long-3short beep error, which indicates ram problem, or low voltage for vdimm....:shrug:

BUT if i am running the CPU-RAM in 1:1, its all good! RAM needs onl 2.25V to be 100% stable, anfd also the default timings, by SPD tights to CL4-4-4-12!:up:

4:5 divider can be that bad...?
just because i see lot of user here using 4:5 divider with p5b deluxe mobo, and its workin' fine 4 them...
what can be the problem? any ideas?

Hi EnJoY
CL4 testing
TXDD2048M1200HC5DC TeamGroup DDR2-12005-5-5-15 2.35V-2.45V D9GKX

SuperPi 32M Stable! @DDR2-1280 4-4-4-4


M/B：P5K
NB cooling：Extreme Spirit II
SB cooling：AS-N1000
CPU：Intel Core2 E6700(L633A549)
CPU cooling：Scythe INFINITY
Memory：Team Xtreem PC2-9600 1GBx2
VGA：ATI X1300PCI
HDD：HDS728080PLA380
Power Supply：Zippy 500GE
Vcore：1.51V
Vdimm：2.61V
Vnb:1.75V(seting)

How come the 2 x 2Gb category is empty? too hard to O/C?

2 x 2Gb

Corsair 2.20vdimm

My first pair 2Gb sticks, not sure yet how much or less Vdimm to try atm but so far this, I know its very mild o/c. But no one else is doing.

http://i194.photobucket.com/albums/z.../DSCF0932a.jpg

http://i194.photobucket.com/albums/z...C5/Orthos5.jpg

Quote:

---

Originally Posted by BlaqMale

anybody care to post some 4x512 results? pretty please?

---

Can we add 4x 512Mb to this to give a comparison to the 2 x 1Gb? It'd just make it more fun and maybe clear up some fallacies (maybe we could post chipset along with it to see which chipsets handle more or less sticks well) :)

Bit more of an improvement with 2 x 2Gb Corsair modules same type as in my last post. 2.30Vdimm

http://i194.photobucket.com/albums/z.../Orthos5-1.jpg

2x2Gb DDR2 Category:

Corsair | Teccxpert | TWIN2X2048-6400C5DHX | DDR2-800, 5-5-5-18, 2.15v | Micron D9 | CPU-Z Validate! & 5.0 hrs Orthos stable! @ DDR2-868, 5-5-5-18, 2.15v

http://i194.photobucket.com/albums/z...-5-182.15V.jpg

Only the beginning on this board with 2x2GB. ;)

Geil| Boblemagnifique | Black Dragon 4x2go pc 6400c5 | DDR2-800 5/5/5/15, 1.8v | XXXX | SuperPi 32M Stable! @ DDR2-800, 5-5-4-15, 1.8v

http://www.ixtremtek.com/ixtek/Artic.../400c55415.JPG

2x2Gb DDR2 Category:

Corsair | Teccxpert | TWIN2X2048-6400C5DHX | DDR2-800, 5-5-5-18, 1.85v | Micron D9 | & 5.23hrs Orthos stable! @ DDR2-898, 5-5-5-18, 2.15v

http://i194.photobucket.com/albums/z...-5-182.15V.jpg

Does anyone know, if the chips on the Mushkin HP2-6400U 2GB stick are the same like on the Mushkin XP2-6400U?

yes, it's d9 gmh

Fine, so I can go with the HP2's and save the extra money :)
ty

Here I am with DDR2-833 4-4-4-12 at 2.25V....haven't pushed them yet
http://img221.imageshack.us/img221/6...sstableys6.jpg

Hi everyone...
I'm not really expert on this..But i'm proud with my result..
http://valid.x86-secret.com/show_oc.php?id=224369
http://img526.imageshack.us/img526/5...s600og1.th.jpg
Do I have try another test?

Gigabyte 965P-DS3 rev 1
E6300 440 FSB X 7 = 3.08 GHz
2 GB A-data 1066
air cooling with Scythe Mine and small fan glued onto NB


Max superpi 32 M and dual large FFT prime 95 stable for 2 hrs:
1100 MHz 5-5-5-9 2.3 V, 2.4 V and my mobo goes nuts beeping and rebooting!

Max everest ultimate read: 8700 MB/sec
Max sisoft sandra 2007 bandwidth: 7950 Mb/sec
Best Superpi 16 M @ 3.08 GHz: 7 minute 53 sec
Best everest ultimate latency: 59.5 ns @ 3.08 GHz 1100 MHz 5-5-5-9 and perf level 9

Crucial | topdog |2 x 1024 PC6400 | DDR2-800, 5-5-5-18, 1.8v | micron D9GMH | CPU-Z Validated! & SuperPi 32M stable! @ DDR2-1080, 5-5-5-15, 2.25v


AMD Athlon 64 X2 6000+ AM2 3.0GHz @3240
Asustek M2N32 AM2 nForce 590 SLI ATX 8 ch Audio 2xLan W/Less Lan
GeForce 8800GTS 640MB DDR3
2GB Crucial Ballistix Tracers DDR2 PC6400 (2 X 1GB) BL12864AL804
Samsung SpinPoint T HD501LJ 500GB SATA-II 16MB Cache
Windows XP Home OEM




http://img.photobucket.com/albums/v1...screenshot.jpg


http://img.photobucket.com/albums/v1...sreenshot2.jpg


http://img.photobucket.com/albums/v1...pdog/cpuid.jpg


http://img.photobucket.com/albums/v1...og/2x32Mpi.jpg


http://img.photobucket.com/albums/v1...pdog/10340.jpg

- Intel E6700
- CellShock DDR2 PC2-9200 1150MHz 5-5-5-18 2.3v
validation 638.5 http://valid.x86-secret.com/show_oc.php?id=228363

CellShock | HIWA | PC2-9200C5 "CS2221650" | DDR2-1150, 5-5-5-18, 2.3v | Micron D9GKX | SuperPi 32M Stable! @ DDR2-1260, 4-4-4-12, 2.55v

http://news.tecnocomputer.it/forums/...3&d=1186998889

more:
http://www.xtremesystems.org/forums/...d.php?t=155056

2x1GB Team Xtreem Pc2-8500C5 + Asus P5B-Deluxe Daily use 600 5-5-5-15 2.1v

http://img173.imagevenue.com/loc354/..._122_354lo.jpg

http://valid.x86-secret.com/show_oc.php?id=218102

Quad6600 | p5k preium | 2x1GB G.skill pc2 6400HZ | 600 @5 5 5 5 2.1V

cpu validation : http://valid.x86-secret.com/show_oc.php?id=231169

http://img473.imageshack.us/img473/8633/snap3kf6.th.jpg

Crucial | uneverno | Ballistix PC2-8500 | DDR2-1066, 5-5-5-15, 2.2v | Micron D9 | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1314, 5-5-5-15, 2.5v


http://img212.imageshack.us/img212/6...mbpi2gbvs5.jpg


http://img212.imageshack.us/img212/7976/cpuz1314yd3.jpg

p5k preium | 2x1GB G.skill pc2 6400HZ (D9GMH)+ 2x1GB Patriot pc2 8500 (D9GKX)| 550@4 4 4 12@2.4V | 8h prime95 x 2

cpu z validation :

http://valid.x86-secret.com/show_oc.php?id=235747

http://img267.imageshack.us/img267/9...rimejd1.th.jpg

There never seems to be any updates in these database threads. What's with that. :shrug:

1T Result

Crucial | uneverno | Ballistix PC2-8500 | DDR2-1066, 5-5-5-15, 2.2v | Micron D9 | SuperPi 32M Stable! @ DDR2-1069 1T, 3-3-3-3, 2.45v

http://img519.imageshack.us/img519/8...933331tza5.jpg

all D9, cool!

can u guys gimme a guide to oc my ram
using crucial ballistix tracer pc6400 800mHz

Quote:

---

Originally Posted by nuxezen

can u guys gimme a guide to oc my ram
using crucial ballistix tracer pc6400 800mHz

---

Beginners guide.......

Loosen the timings.
Set the divider.
Increase the voltage.
Start clocking.

erm
im totally noob
im using asus m2ne
i heard that this mobo sucks...

CORSAIR| windwithme | CM2X1024-8888C4D| DDR2-1111, 4-5-5-12, 2.4v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1309, 5-5-4-5, 2.46v



CPU:INTEL Core 2 Extreme QX6800
MB: FOXCONN MARS P35
DRAM:CORSAIR Dominator TWIN2X2048-8888C4D
VGA:ELSA 8800GT 512M
HD:Seagate 7200.10 320G
POWER:Corsair VX450W Power Supply
Cooler:Thermaltake V1
http://img57.imageshack.us/img57/7590/mars04li8.jpg

SuperPi 32M Stable
http://img57.imageshack.us/img57/884/mars1309pitk0.png


CPU-Z Validated!

windwithme, awesome setup. what in the world is that alittle bear?on your corair fan. haha that funny that cool. nice overclocking

Nobody with Kingston VR 667? :shakes: :shakes:

Kingston | Unrealer | KVR667D2N5K2/2G | DDR2-667, 5-5-5-15, 1.8v | Kingston | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1066, 5-5-5-15, 2.1v

http://i20.photobucket.com/albums/b2.../Dibujo-36.png

Super PI 32 crashes :p: :p: :p:

Database Updated. :up:

If you do not see your result in the database, it means you did not submit it with the proper criteria. The most common thing I am seeing is submissions without enough stability tests ran. For example, if you have a quad-core CPU, you need to be running 4 instances of super-pi, not 1.

Quote:

---

Originally Posted by Mastercyclone

windwithme, awesome setup. what in the world is that alittle bear?on your corair fan. haha that funny that cool. nice overclocking

---

that's windwithme's signature, wherever you see the crystal cat expect a good review.

http://farm3.static.flickr.com/2137/...979aaf2d_o.gif
http://valid.x86-secret.com/show_oc.php?id=292099
OCZ2FX11501G FlexXLC (nominally:DDR2-800 3-4-4-15)
RAM Size : 2048 MB (2x1024)
RAM Freq : 586.7 MHz
RAM Ratio : 3:4
RAM Timings : 5-4-4-15
CPU : Intel Core 2 Duo E4500
Freq : 3520.3 MHz (440.04 * 8)
Motherboard: ASUS Maximus Formula SE


OCZ | FlexXLC | OCZ2FX11501G | DDR2-800, 3-4-4-15, 2.4v | OCZ | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1173.4, 5-4-4-15, 2.6v

I think I had these down to 3-3-3-9 @ 933, will try and repeat and see what it does for bandwidth!

Nice result! DB Updated. :)

Quote:

---

Originally Posted by leolei333

all D9, cool!

---

Yes

OCZ | initialised | FlexXLC OCZ2FX800C32GK | DDR2-800, 3-4-4-15, 2.1v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1173, 5-4-4-15, 2.6v

This data may be incorrect. The part number you've listed is what I was sold and what is printed on the modules but what shows up on SPD-z and CPU-z is OCZ2FX11501G 9200 (DDR-1150) am I missing something here, are they all the same modules with different bins depending on achievable latency and speed? These are very flexible chips, 3-3-3-9 is achievable up to ~933MHz, 4-4-4-12 to 1066 and 5-5-5-15 to about 1200.

Quote:

---

Originally Posted by Unrealer

Nobody with Kingston VR 667? :shakes: :shakes:

---

Here http://img143.imageshack.us/img143/2...mrgreenbv4.gif

Kingston | Marcello | KVR667/2GB | DDR2-667 5-5-5-15, 1.8v | CPU-Z Validator | SuperPI 32M Stable | @ 1000 4-4-4-15, 2.2v | Elpida |

------------------

KVR 667 @ 1000

2.2 Vdimm

Gigabyte 965P-DS3 Rev. 3.3 Bios F7

DUAL PI 32M Stable!!

http://img151.imageshack.us/img151/4928/0002xo2.jpg

CPU-Z Validator

MAX. 1-1 (510x7)

http://img88.imageshack.us/img88/6976/001kg0vn7.th.jpg

http://img85.imageshack.us/img85/6572/helloqp9tp0.gif

4x2Gb G.Skill F2-8000CL5D-4GBPQ @ 1066MHz 2.1V on Asus M3A-MVP Deluxe

SPi 1.4 32M stable pic:

http://img233.imageshack.us/img233/6...copypx3.th.jpg

Was running Prime95 for hour, but system froze when AOD was starting :(

I can get my 1150 Flex XLC masquerading as 800 to run SuperPI 32M at 850MHz and 3-2-2-4 2T timings. Will repeat and post screen grabs etc...

Quote:

---

Originally Posted by initialised

I can get my 1150 Flex XLC masquerading as 800 to run SuperPI 32M at 850MHz and 3-2-2-4 2T timings. Will repeat and post screen grabs etc...

---

You can't run X-2-2-X on P35/X38 chipsets, it's just a glitch.

http://img217.imageshack.us/img217/7...reenla3.th.jpg @2.3V

I cant change RAS to CAS to 4 coz it make many errors in Memtest and its not stable. :confused: :shrug:

And I cannot go over 920Mhz on any voltage and timing... bad chips... :shakes: :shakes:

Do they run rated timings (including sub-timings) at their minimum rated voltage? Because if they don't, I'd most certainly RMA those.

Eh oops I was looking on some images and I posted bad picture. :D

Quote:

---

Do they run rated timings (including sub-timings) at their minimum rated voltage? Because if they don't, I'd most certainly RMA those.

---

Yes they run.

Quote:

---

Originally Posted by EnJoY

You can't run X-2-2-X on P35/X38 chipsets, it's just a glitch.

---

Problem in Memset?

I did see an improvement over 3-3-3-6 but this may have been due to also setting tRP=2 for the 3-2-2-4 run. Damn, going to have to start over.

A mate asked for Sandra memory bandwidth data, I think that could be a good addition to this thread.

Quote:

---

Originally Posted by initialised

A mate asked for Sandra memory bandwidth data, I think that could be a good addition to this thread.

---

LOL, a little late to start that now.

my ADATA Vitesta Ex. Ed. 4*2Gb tested @ 1066mhz 5-5-5-15 with 2,1V on P5K Premium Black Pearl.


http://www.pctunerup.com/up/results/...DATA533mhz.jpg


Great ram but I don't know what chip mount.
Tried @ 1200mhz 2,2V but unstable..

Core2Duo E6700 on DFI X38-T2R
SuperTalent T800UB1GC4 x2
2x1GB
800MHz 4-4-3-8 2.0v
1200MHz 5-5-4-11 2.18v- Memory Overclocked Speed, Timings and Voltage
http://valid.x86-secret.com/show_oc.php?id=314574
http://www.pctunerup.com/up/results/...4-11-perf5.JPG

JaD


You can't imagine how upset I was when my GMH sticks were replaced with (supposedly) suckier ProMOS...well, considering i wouldn't run high vDDR anymore (the old GMH i had to RMA died on 2.35v 24/7) those sticks are pretty nice :) 600 5-5-4-11 with good subs is definitely a good result imo.
Too bad loosening subs/raising voltage has no benefits, a bit more juice for bench runs would have been appreciated :P


Everest results (old build, lastest stable hangs up the system, nothing special anyway at just 400x9):
http://www.pctunerup.com/up/results/...9_cachemem.JPG
http://www.pctunerup.com/up/results/...01846_copy.JPGhttp://www.pctunerup.com/up/results/...45_latency.JPG

http://www.pctunerup.com/up/results/...02031_read.JPGhttp://www.pctunerup.com/up/results/...2101_write.JPG

What no Patriot Memory? I will add my results once I get my RMA 680i XFX back.


Patriot Extreme Performance 2x1gb 4.4.4.12 2.2v #PDC22G6400LLK

Tested and stable
400 4.4.4.12 2.1v
450 4.5.5.5.16 2.1v
485 4.5.5.5.18 2.2v
500 5.5.5.5.18 2.1v
530 5.5.5.5.18 2.1v
550 5.5.5.5.18 2.1v

550 was the last I went to while out side of the case with 1x120mm Rosewell 75+/- CMF on it. Everything was stock cooled. Mobo "--" Boot bugged on me. So its on its way to XFX. Didnt get to water it.

Tom's hardware quotes that the samples the 608
Overclocking 9 Value-Priced DDR2-800 Kits
Maximum Speed

I only hope mine can get close to that. Nothing a few 120mm fans, volts and some obscene words cant check.

Wanted to update the sticks I listed a little over a year ago. Now on an old P5B-D 965 mobo instead of the EVGA 680i.

Buffalo | gundamit | FireStix PC2-6400 CL5 | DDR2-800, 5-5-5-15, 2.35v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1236, 5-5-5-15, 2.35v

http://img129.imageshack.us/img129/3...emdefauou5.jpg

Also got 2 sets of the Crucial 8500 Tracers that do pretty much the same

Buffalo | gundamit | Crucial PC2-6400 CL5 | DDR2-800 (Ballistix Tracers 8500, 5-5-5-15, 2.2v | Micron D9G** | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1242, 5-5-5-15, 2.25v in bios

http://img168.imageshack.us/img168/2...defaultnj6.jpg

Quote:

---

Originally Posted by JaD

Core2Duo E6700 on DFI X38-T2R
SuperTalent T800UB1GC4 x2
2x2GB
800MHz 4-4-4-12 2.0v
1200MHz 5-5-4-11 2.18v- Memory Overclocked Speed, Timings and Voltage
ProMOS chips
http://valid.x86-secret.com/show_oc.php?id=314574
http://www.pctunerup.com/up/results/...4-11-perf5.JPG

JaD


You can't imagine how upset I was when my GMH sticks were replaced with (supposedly) suckier ProMOS...well, considering i wouldn't run high vDDR anymore (the old GMH i had to RMA died on 2.35v 24/7) those sticks are pretty nice :) 600 5-5-4-11 with good subs is definitely a good result imo.
Too bad loosening subs/raising voltage has no benefits, a bit more juice for bench runs would have been appreciated :P


Everest results (old build, lastest stable hangs up the system, nothing special anyway at just 400x9):
http://www.pctunerup.com/up/results/...9_cachemem.JPG
http://www.pctunerup.com/up/results/...01846_copy.JPGhttp://www.pctunerup.com/up/results/...45_latency.JPG

http://www.pctunerup.com/up/results/...02031_read.JPGhttp://www.pctunerup.com/up/results/...2101_write.JPG

---

I didn't notice 3+ hours of large FFTs calculation or PI 32M were necessary, my bad :)

2x 32M SuperPI running:
http://www.pctunerup.com/up/results/...141516_pi1.jpg

completed:
http://www.pctunerup.com/up/results/...141546_pi2.jpg


SuperTalent | JaD | T800UB1GC4 | DDR2-800, 4-4-4-12, 2.0v | ProMOS | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1200, 5-5-4-11, 2.18v

Interesting results... I need to give it a test run myself once I get my new mainboard :up:

Quote:

---

Originally Posted by WSX

that's windwithme's signature, wherever you see the crystal cat expect a good review.

---

Yes, thanks:)

Although I'm very busy at the moment, I had some time yesterday, and decided to give my new set of Crucial Ballistix 5300 a run.

Crucial | Don_Dan | Crucial Ballistix 5300 BL2KIT12864AA663 16FD2 | DDR2-667, 3-3-3-12, 2.2V | Micron D9GMH | CPU-Z Validated & SuperPI 32M stable! @ DDR2-1100, 5-5-5-18, 2.32V

I don't know if they are D9GMH, because I haven't removed the heatspreaders, but I think this IC has the highest probability of being the correct one. The results are not that good, and I'm not 100% happy with them, so I will try to beat them when I have some spare time again.
Maybe my mainboard was limiting me here, or more precisely NB cooling.

Hi there

I've problem with choosing my memory for my newest config. I'm planning to take gigabyte GA-P35-DS3P with 4gb (2x 2gb)

But I've looked over this forum and saw a lot of interested things. The problem is that I can't see the good ones in the bad ones so if you can enlighten me with some ideas.
I saw 4 series that looks interesting but I don't know if it's a good choice. Can you help me please :rolleyes:

• G.Skill DIMM Kit 4GB PC2-8000U CL5-5-5-15 (DDR2-1000) (F2-8000CL5D-4GBPQ)
  
• A-DATA Vitesta DIMM Kit 4GB PC2-6400U CL5 (DDR2-800)
  
• OCZ Platinum XTC DIMM Kit 4GB PC2-8000U CL5-5-5-18 (DDR2-1000) (OCZ2P10004GK)
  
• OCZ Reaper HPC Edition DIMM Kit 4GB PC2-8500U CL5-5-5-18 (DDR2-1066) (OCZ2RPR10664GK)

The best 2x2 choice today is OCZ FleX pc-9200.

http://valid.x86-secret.com/show_oc.php?id=376702

FlexII 2x2 = 4 @2.1v
5.4.4.12.3.18.3.8.7.8 @1196mhz

---------------------

;)

any1 could help me config the timings on my rams? got 2x1 crucials bl2kit12864al804 kit and cant get it stable(@ 583 :D) lately :(
or just pm me witch some timings faq for p35 and so on i found something but for nvidia'a chipsets
anyway thx for help :)

testing...2x1Gb Tracer 6400

Crucial | Unrealer | Tracer PC2-6400 BL2KIT12864AL804 | DDR2-800, 4-4-4-12, 2.2v | ¿?¿? (single side) | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1070, 5-5-5-15, 1.91v

http://i38.photobucket.com/albums/e1...2/Dsc07593.jpg



not bad? :(

when i bought mine tracers i had stable 600mhz cl5 with 2.2v ;)

Here is a result from my first DDR2-RAM ever, my good old Corsair Dominator 6400C4D.
I had them running at those settings for over half a year without a problem. But I just noticed I forgot to take a CPU-Z validation... Anyway, here it is:

Corsair | Don_Dan | CM2X1024-6400C4D | DDR2-800, 4-4-4-12, 2.1V | ProMos | Awaiting CPU-Z Validation & SuperPI 32M stable! @ DDR2-800, 4-4-4-12 1T, 2.10V

Please note that this is an entry for the Intel 1T section, also, the second entry for ProMos based RAM.


On a side-note, I wonder why no one ( or almost no one ) posted some 4GB ( 2x2GB ) entries. Come on guys!

Still going but here is an interm shot

Corsair | DoGMaN | TWIN2X2048-6400C4| DDR2-800, 4-4-4-12, 2.1v | Unknown | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-914, 4-4-4-12, 2.1v

- Intel
- Corsair Twin2X-6400C4 Rev 2.1
- 2x 1Gb
- DDR2-800, 4-4-4-12, 2.1v
- DDR2-914, 4-4-4-12, 2.1v
- Unknown
- http://valid.x86-secret.com/show_oc?id=398642
- http://www.tinypic.ca/images/8iiw4yk...8hu6_thumb.jpg
- DoGMaN

Hey guys, I've had a read through, and having trouble deciding. I know I can't get the Crucial kits (bummer because 1 of the main offices is not far from here) due the board having issues with it (I'm using the Maximus Formula).

Currently using Adata Extreme 1200's which OC like a mofo! But sadly I need more than 2GB now. Need at least 4GB. (My PC is crashing when flicking through large jpg's)

Can get my hands on most memory brands in the UK so whatever's best to pair up with my QX9650 + maximus formula.

I'll give the crucials a go if people think I should at least have a bash (there are some success stories after all)

~Bex

Another result from me:

TeamGroup | Don_Dan | Team Xtreem TXDD2048M667HC3DC-M | DDR2-667, 3-3-3-8, 2.2v | Micron D9GMH | CPU-Z Validated! & 4hrs Prime 95 Stable! @ DDR2-1066, 5-5-5-15, 2.19v

I know it's not 4 hours entirely, more 3 hours 55 minutes, but it's dead stable at those settings, the odd time reading is because I messed with my Windows date monitoring. ( can't translate it better... )

http://img528.imageshack.us/img528/5...5300tg2av5.jpg
By don_dan at 2008-10-02

|Corsair| Kaskuli | CORSAIR TW3X2G1600C9DHX G ver 3.1 |Micron D?????|DDR3-1600, 9-9-9-24, 1.80v | CPU-Z Validated

Here is my score:

http://jungle.at.tut.by/work/cachemem.gif

Kingston ValueRAM DDR2-800 2x1024MB @2.0V 5-5-5-18 (in dual-channel mode). I bought both modules for $50 three months ago.

So, why do people buy expensive pop-RAM, if even cheap Kingston kicks it very well?

P.S. I'm going to hit 500MHz tomorrow.

570MHz CL4-4-4-4 @ 2,43 Volt - 2h Prime Blend Stable :hwluxx:

http://666kb.com/i/b445zldivfmxodung.jpg

PlanetDynamic,
I wonder how long can your RAM operate at such parameters before it die? In two, three, four weeks?

They should last longer than that at 2.43V if they're cooled properly.

The VDIMM is only (!) for Prime Blend testing and no 24/7 Setting. :yepp:

CellShock "Red Devil" 5-5-5-15. VDimm=1,99. PL=8. Totally stable. 24\7 usage setup.

http://img227.imageshack.us/img227/644/32979893kb7.jpg

Sorry guys, but all those entries aren't correct, did you read the rules about showing stability ( 32m instances or Prime 3h+ )?

my Teamgroup at 1360 at 2.55v.

Here my score..