Exactly what I thought, Thats a lot of money for just a hobby.
Printable View
Exactly what I thought, Thats a lot of money for just a hobby.
We will see soon.Quote:
That's pretty darn small. What temperatures does that provide you?
regards
Box brake sounds good until we get into thinking about dies... If you noticed, 2nd and 3rd bends are not that simple anymore... need die made... Plasma cutter, Hot damn it. I wouldn't mind having one, I wouldn't mind having bender.... fact of life is, in S. Cal space is premium. I really don't have much space left whatsoever now that Mill is taking nice chunk and laser engraver too.... CNC Plasma cutter will eat up rest of my workable shop space...
ya should be able to get a cascade in there if using plate hx and 2 rotaries, looks similar size to my cascade minus the bottom section.Quote:
Originally Posted by Duniek
2 of those rotaries would rock in a hx
It is possible to use it for small cascade too ;)
http://ld-phasechange.com/images/SS_cases/rotary/6.jpg
regards
All Bends on a case can be made using a Box & Pan brake,they are a must have tool for cases.
They have removable fingers for different widths,and the witdts of the fingers also vary.
If you don't want to spring for a cnc plasma cutter,you can buy a jump shear and uses electrical knockout punches to make the holes, they are made in round ,square & retangular sizes. even custom,but those would be expensive.
ps: you can buy a convertable cnc table that that moves in X,Y & Z axix's.you can interchange a plasma cutter, laser cutter or a router for wood or plastics and the like
picture is a 48" 12 gage box and pan brake,notice the removable fingers. that will bend 1/8 steel its entire width, one that heavey is not needed for cases.
the above brake is a pexto,very industrial and expensive.
here's a grizzly tools(import) 16 gage box and pan brake 575.00
looks really hard to use or maybe its just me :)
It's just you ;) they are simple ,you slide the metal under the fingers,pull lever to clamp metal,lift apron to break(bend)metal to desired angle.Quote:
Originally Posted by epion2985
you do have to adjust for metal thickness and you can adjust to change radius of the bend.
fingers attach & remove simple by tightening or looseing a bolt.
well now I just need to have $600 fall out of the sky and I am all set =/
Painted cases black and metalic black colour.
http://shrani.si/files/picture003pahw.jpg
Regards
Very nice work dude :up:
Thanks :toast:Quote:
Originally Posted by Hystrix^
regards
Hey LD.
Im thinking about getting a case for the bottom of my Lian Li pc-v2000B II Pluds.
would like to mount 2 x PA120.3 verticaly in it, on on each side.
Just want to make it look like it is build for the case you know :O)
Or so it is my original thougth :)
Should have said Horisontly :)Quote:
Originally Posted by Nosfer@tu
@Nosfer@tu: Which case did you mean, SS or Rotary?
regards
I guess an SS one, if it's for under a Lian Li.
Your work is just AWSOME man, I like it! :toast:
These looks great mate well done :).
My Mate works with a plasma cutter at work on Nights ;) I'll have to knock up a drawing on cad and let him have a play lol
just a word the lazer's on the machine he works with are £5000 a piece i know ive fixed it for them a few times .
I was just thinking about hvaing a box I could place below the Lian li 2000 and mount my wather in that one :)Quote:
Originally Posted by LittleDevil
Then I wouldent have to cut it up and sacrifice the harddrive space in the bottom.
But I decided to go with a benching table instead now :)
No problem ;)
regards
LittleDevil
Hi! It's cool and you know it... More cascade pic. plz ;) :toast:
Looks like I made the right choice to order from you :)
I'm getting a pink one, YEY
orly ??Quote:
Originally Posted by nikotime
I would like to see case in this color :p:
Its arriving tomorrow apparently, I'm sure he will upload a pic
Another Sexy Colour :toast:
http://ld-phasechange.com/images/SS_cases/rev2.0/15.jpg
http://ld-phasechange.com/images/SS_cases/rev2.0/16.jpg
regards
:eleph: sexytime! very nice, I like.... how much? haha
mmm... I think a pink V2000 would be a bit too much, maybe next time :p:
Very nice case LD, can you tell me the dimensions ?Quote:
Originally Posted by LittleDevil
regards
How is the Benching table comming along?
ZOMG Pink!
nikotime, please tell me you're a girl. :confused:
Nice one LD
pink case,nikotime is either a girl or a guy who is sleeping in his older sisters room who left for college.;)
Quote:
Originally Posted by wdrzal
Hehe :banana:
Guys i can tell you that i have 1 pink on stock if someone is interested :confused:
@Nosfer@tu: It will be finished really soon.
Regards
Lol, repaint it and you'll sell it for sure :P
you'll try anything to lure a female overclocker over,I thought I seen it all :rolleyes:Quote:
Originally Posted by LittleDevil
han! very good job ! :slobber:
oh, that's sex! :slobber:
Thanks Guys for nice comments ;)
regards
hello :) Just gotta say I absolutely wuv that pink one :shocked:
Hello LD do you sell those SS boxes?
I belive he does :)Quote:
Originally Posted by malik22
Even in pink too ;)
i send emal
My Rotary was picked up today. So it's on the way back to you now. JEEE!!! :banana:
White colour :D
http://ld-phasechange.com/images/Nosfer@tu's_SS/2.jpg
Regards
Did you get those OCTF Rotarys back? :stick:
:slobber: :slobber: :slobber:
I love it :yepp:
Quote:
Originally Posted by LittleDevil
That looks great. Is that realy carbon fiber?
Wow thats pretty amazing. I would be proud to have one of those.
Carbon style is very sweet LittleDevil, You got that going on:up:
Thanks guys :p:
Kind Regards
Mybe little better combination.
http://ld-phasechange.com/images/SS_...0/carbon/6.jpg
Regards
Put the grill inside out i say, tons better
Next revision of cases will be like that + something new ;)
Regards
Would look better but going to have mod the grill at the 4 mounting points for it to sit flush.
Hey,
you did what i told ya :P
Looks great!
Very nice , maybe we do some bussines afterall , who knows :) . Keep it up .
Mybe sometimes :)Quote:
Originally Posted by bonzo_catalin
And thanks for nice comments guys.
regards
realy like the carbon unit hm would go well in my pc setup im building now with a quad.
Little modification on Rotary case.
http://ld-phasechange.com/images/bre...s_rotary/6.jpg
Regards
They just get better and better....
Nice work!
i would suggest you to go for bigger condenser, those 700w condenser limits you really much when it comes to choice of compressor. both for SS as well as autocascade.
I tried once to build rotary SS with 14k btu rotary and this condenser, it was way to weak, ended up with a 1.5kw condenser and that was what was needed.
regards
Tim
Sexy new revision....
YGPM.
Is it possible for you to replicate the black anodized metal look of the Lian-Li Cases?
What are the exact dimensions of these cases, since I'm thinking about adding a small case for my watercooling, but am not sure whether I'll just buy another Lian-LI PC60 and cut that in half or get a pre-made case for this.
Nice :)
The single stage case is still the same revision as mine, right?
nice work LD, what size STUV condensers do you use with the rotary compressors??
I would like to know this aswell. Would be really nice if you could :)Quote:
Originally Posted by pote
dimensions?
holy :banana::banana::banana::banana:
Now that's Smokin
Well Ales your really pushing the envelope m8!!!
I like your work and innovation really, i know when you started and we talked a lot on msn but now your really going Hard :O
Good luck with the business!!!!!!!!!!
grtz,
Jort
Rotary New design will be something like that, and mybe some other changes, we will see.
http://ld-phasechange.com/images/Rot...Maximous/2.JPG
Kind Regards