Printable View
I havn't really messed with it, I have an FX-57 for overclocking, but its running now at 2.8GHz with stock volts.
I have played with one other CACJE it was a 0545APAW i think. did 2.92GHz with stock volts, suicide at 3.2GHz, but I didnt like how it acted. If it was unstable in Super Pi it would just lock up instead of throwing an error. And cold bug kicked in at 10C really bad
Quote:
Originally Posted by ugp
I completely agree with this, I don't know what they did, but my 06 chip idles at 31C compared to about 45C for my 0540
yeap my 0540 is IHS-less and the temps are awesome...........i never saw it go past 44C even with 1.65v and past 3.1GHz on airQuote:
Originally Posted by Bob21
Yep I popped the lid on my 0540 too and temps wend down by seriously 20C!!
But it died and I put the IHS back on and RMA'd it ;)
That is evil lol...so evil...did the RMA work?Quote:
Originally Posted by Bob21
Yes, and I do not feel guilty because the IHS being removed had nothing to do with the chips death.
running my cabne IHS less to.. dropped 6C on load ;)
on a side note, ugp, we almost have the same specs lol :) only our.. PSU's differ
Yeah I see that...also you are running a RAID 0 with Raptors...hopefully this deal with trading my Opteron 150 and some cash for two 36GB Raptors goes through and I can have my RAID system.Quote:
Originally Posted by macg
Its suprising how much faster some 10K rpm SATA drives can make your system feel :toast:
Oh I know man...I know with this one 74GB Raptor...it loads XP up 4 times as fast as the SATA2 drives I have used in the past...
With this one drive I get 57MB/s transfer rate...
I want to play with a RAID system now...I have never setup a RAID before...
Ya, you should be up to about 95MB/s maybe more with the 36gigers in raid0. pretty snappy in windows.
I ended up polishing my drives too, looks pretty sweet.
Ok, after 3 weeks tweaking, here's my Opty 146 and 2Gb Gskill PC4000 HZ's....
Interestingly, couldn't do this at 290x10.. failed Prime in minutes. 323x9 - no prob.... Go figure
Prime stable. Not had time to run Memtest.
http://i50.photobucket.com/albums/f3...gskillcpuz.jpg
I'm sure I can get more... just need time (and help!) to achieve it... :)
This Chip had the worst contact with the IHS, once removed it drop 15oC under Load, it couldnt do 3Ghz before.:D
http://img62.imageshack.us/img62/825...t273mhz0bz.jpg
CAB2E 0604EPAW
Batch #245ish
2.9 ghz @ stock voltage
http://www.johnshim.com/forums/xtrem...epaw2hours.jpg
Can someone explain the 'batch' thing?
Batch really doesn't matter, its just the exact batch the CPU came from, kinda like a batch of rolls on a pan in the oven, or cookies.
And how can i recognize it on my chip?
Another question:
I bought an opti 146 CACJE 0601GPAW.
It is going up to 2.75 with default vcore but it is getting very hot. 60+ degrees.
Stock air of course for that.By removing IHS & stock cooling will i have better results with this voltage? What temperature shall i expect?
San Diego cores are cooler than Optis (and Venice is cooler than Opti two at the same MHz...)?
EDIT: 3-13-06 Re-Ran 3DMark 05 Provided Link - also re-ran 01 link provided
| Opty 148 Cabne 0528 GPMW batch#0253 cooled w\ Mach I "PC Ice Modified" IHS Still Intact|
| DFI Ultra D >6-23 bios|
| Mushkin Redline XP4000 (2x512)|
| Sapphire X1900XTX w\DD waterblock|
| 2x Hitachi 80gb Sata II Raid 0 |
| OCZ 520w Power Stream |
Prime 8hrs @3412mghz>Taken with Digi-Cam:
http://i17.photobucket.com/albums/b8...s/Prime8hr.jpg
Super Pi 32m @3565mhz; Ram@254mhz 2-2-2-5 1T :
http://i17.photobucket.com/albums/b8...uperPi32m5.jpg
Super Pi 1m @3619mhz: Ram@241mhz 2-2-2-5 1T (This run was not optimized) :
http://i17.photobucket.com/albums/b8...619mhzPi1m.jpg
3DMark01@3651mhz! :slobber: ; Ram@260mhz 2-2-2-5 1T; VC @ 774c_873m :
http://i17.photobucket.com/albums/b8...74c_873m3b.jpg
3DMark 05 @3651mghz; Ram @260mhz 2-2-2-5 1T : VC @ 774c_873m :
http://i17.photobucket.com/albums/b8...74c_873mb3.jpg
SS Shot @ 3740mhz :
http://i17.photobucket.com/albums/b8...UzVerified.jpg
3DMark 01 45,516 > http://service.futuremark.com/compare?2k1=8924615
3DMark 05 14,522 > http://service.futuremark.com/compare?3dm05=1875812
Phase
Hey Phase, welcome. Nice set of screens.
146 Opteron CABYE 0540FPBW 9x330 vcore 1.4 + 104% (bios)
Memory OCZ 2GB PC-4000 Platinum EB @ 270MHz 3-3-2-7
DFI SLI-DR bios 623-3
Watercooled
Primestable: yes
3D-stable: yes
Phase those are very nice clocks on the opteron :toast: Your scores should be higher though as you mentioned. Try lod +3.0 for nature in 2001 get those superpi times were they belong. One of the highest clocks ive seen though !!
Family man 72 can you do that clocks with 10 multi?
@coop
Thanks for the welcome. That is an excellent Super Pi 32m run by the way.Quote:
Hey Phase, welcome. Nice set of screens.
@loc.o
Thanks! Yea this 148 is another Cabne monster, benching 3D @3651mhz is higher than I first thought it would go. The Super Pi 1m was just a test to see how high it would run it at. 3DMark 01 is another story... I will try the LOD after a fresh install, this install is already showing signs of slowing down. I also would like to re-run Super Pi... I know there is more left in this Opty...Quote:
Phase those are very nice clocks on the opteron Your scores should be higher though as you mentioned. Try lod +3.0 for nature in 2001 get those superpi times were they belong. One of the highest clocks ive seen though !!
NOTE: Posted new 3DMark 05 SS and provided ORB link. *Post # 4840 above*
Edit: 3-13-06
@loc.o
Thank you for the suggestion. :toast:
Check out the new 01 score in my post above.
I have not tested yet 1:1 with 10 multi. I will try later :)Quote:
Originally Posted by Spyrus
But I know that EB:s are stable at least till 273 MHz. Even 3D-stable.
I haven't seen many 06 144's, so I thought I post some quick results with the one I received today. Just getting started with this: CACJE 0602 GPMW. At stock vcore, 9x295, over 1hr prime stable. Had bump vcore to 1.425, 9x312, still running prime, currently at about 1 1/2 hours. That's 2.8ghz at just over stock voltage. Not bad for $150 :D I'm sure there's still more in it. I remember when that would be an amazing overclock for a 3000. These opty's have really raised the bar. Just about done for tonight, will try and get some screenshots up tomorrow.
EDIT: Still trying to find the max of this chip. Here is 1 hour of prime at 2.9ghz. Memory is on 100 divider just to rule it out. Going to stop it now and crank 'er up some more.
http://img393.imageshack.us/img393/5493/9x3229vo.th.jpg
UPDATE: 3.0ghz 32m @ 1.475v :D Failed prime after 15 min. Raised vcore to 1.525, LTD to 1.3, CHIPSET to 1.6. Currently priming--passed 26min so far, this might be stable. 1.2ghz overclock with air cooling :woot:
http://img128.imageshack.us/img128/9000/9x3345wg.th.jpg