Ace-a-Rue
http://www.uabit.com/index.php?optio...d=11&Itemid=93
Printable View
Whats the point of Resetting UGURU?
According to this, the thermal limit for a Q6600 is 71C. http://processorfinder.intel.com/det...px?sSpec=SLACR
My question is, is that with or without the majical 15C Tjunction thing? My current uGuru/Speedfan load is 65C. My Core Temp load is 80C. Which one of these should I compare to the 71C? I'm 95% sure it's the uGuru one, expecially since the Core Temp says something about a Tjunct max of 100C (but shouldn't it be 86C?).
Just have to say that im LOVING this board. Beats the hell out of my POS 680i. I wasnt able to get over 2.7 stable, im now at 3.6 4 hours prime and still going strong. Still have alot of tweaking to do, a bit of modification, but otherwise, im stoked Also wanted to say thanks to Th3Joker (For posting his settings) strange|ife for his settings and Ace-a-Rue for his settings :up:
I was hoping to find some settings posted here, but there is 160+ pages to look through!!! If you know right where they are would you mind putting a link to them?Quote:
Originally Posted by SkItZo
Thanks -Jim
Yes I asked for help myself because It would take days to read through 180+ pages (thats about when I asked for help first). Some people on thie forum just seem to ignore the question though.Quote:
Originally Posted by jimmsch
have you tried it?...what results did you have?Quote:
Originally Posted by Darth Vader
i will try it later...doing some personal finance stuff at the moment.;)
One man wishes to reset the counter to sell mobo. :)Quote:
Whats the point of Resetting UGURU?
not yet, but that man says than it's only reset bios not uguru-counters.Quote:
have you tried it?...what results did you have?
.
Could you please list all of your voltages and any special cooling changes or other mods you did?Quote:
Originally Posted by SkItZo
I reduced the memory strap to 1:1 and still have random bluescreen crashes. For those of you running a Q6600@3.6Ghz, what all have you done? Next month I will buy another 40mm fan for my MCH, but I already have one on my PWM. It seems many people hit 3.6Ghz without doing these extra steps.Quote:
Originally Posted by Keetha3
Still having issues.
EDIT: I'm sorry about the double post.
Ace your new avatar is _hilarious_. :up:
e8400 works very nicely on this mobo BTW.
:yepp: :D ;)
Ace I love it !!!!:up:
Not a good chip?.. All your settings look spot on.Quote:
Originally Posted by Keetha3
CPU may need more voltage
thanks!:)Quote:
Originally Posted by GARY1951
any word on when the 16 final may be released?
i think it is a month or two away; my best guess.
Voltage is 1.550 in Bios, 1.50-1.52 idle, 1.45-1.47v load...Quote:
Originally Posted by Ad1tya
I can't really do much more than that :(.
My VID 1.2750v... Should be a good OCer.
FSB 400x9Quote:
Originally Posted by Keetha3
Vcore 1.51 in bios 1.42 after vdroop (I reckon i can drop it back to 1.50)
MCH 1.41
CPU VTT 1.23
ICH 1.05
DDR2 2.2
ICHTO 1.5
DDR2REG +2%
The rest is stock
Mods i have done to the board are...Just the bolt mod, posted by Ace-A-Rue, i have a 40mm fan on both the PWM and NB, I also have a 120mm fan pointed at the PWM cos i need to do some final adjustments to get it cooling right
I have a VID of 1.30, is that good?
According to Ace (the only person I've seen talk about VID), you have a good VID. Slightly higher than mine.Quote:
Originally Posted by SkItZo
And I must have a "bad" board or chip. I just can't get 3.6Ghz stable, and my voltages are even slightly higher than yours.
Could you please share your temps and what you used to measure them?
My temps under full load were 60/60/57/57 PWM was on 68 i used both coretemp and pc wizard to mesure tempsQuote:
Originally Posted by Keetha3
Ace, I'm hitting a memory OC wall at max divider 1:2 at around 1225MHz. Memtest just locks up past that point. vMCH doesn't help, laxing sub-timings doesn't seem to help. Memory is not at fault, it's without a doubt a chipset limitation. Is there some known bug or setting that I may be missing?
I got 2 gig Cell Shoch DDR2 1066mhz ram this morning. So i have been trying to get this thing to boot past 3.9ghz. Just above 3.9ghz windows starts to load and then I get a BSOD that says error in non paged area. It may be my voltages are too low or something else.
Could you guys suggest some voltage and other settings that I could try please?
Where are people reading their VID's from? In Coretemp iget 1.30 but in pc wizard i get 1.188?
Already done that but thanks for trying man :). Ive got it to boot into windows @ 3.9ghz but had to bump the CPU voltage to 1.7ghz to get it there. I am now @ 3.8ghz but it still requires 1.6050v to boot into windows and run 3dmark 06 without rebooting or freezing on me. I have my ram settings set to auto with voltage set to its reference 2.3v (its written n the ram 2.3v). Windows wont boot up with the voltage on the ram any lower. I have the ram set to 1:1.2 and the CPU is @ 422 X 9