MUSHKIN REDLINE XP4000 sneak peek...

Printable View

Show 100 post(s) from this thread on one page

05-21-2005, 04:35 AM
Rabbi_NZ

Quote:

Originally Posted by Unrealcpu

...i was running 3.7 volts into the ram...

How much vDimm is RedLine warranted to?
05-21-2005, 04:42 AM
Sauron_Vie

Quote:

Originally Posted by Rabbi_NZ

How much vDimm is RedLine warranted to?

i guess 3,5 V or i am wrong now ?? :confused:
05-21-2005, 04:59 AM
Rabbi_NZ

My point is this... if you run 3.7vDimm don't go getting an RMA on the memory... whether or not the memory is damaged it makes no difference now because YOU HAVE VOIDED THE WARRANTY.

Quote:

THE REDLINE MEMORY MODULES ARE DESIGNED TO RUN AT HIGHER VOLTAGES UP TO 3.5V AND SUFFICIENT COOLING IS A REQUIRED

Quote:

991440 1GB (2x512MB) XP4000 2-2-2 Redline

Latency 2-2-2
Frequency 500MHz
Parity Unbuffered
Voltage 3.3V-3.5V
Module Density 64Mx64
Chip Density 32Mx8
Pins 184
Package Jet Black 6 Layer PCB
Heat Spreader Yes (color may vary)
Part # 991440
05-21-2005, 10:51 AM
Entity_Razer

any european links and/ or coupons yet ;)

Dam man .... Now I know what I'm working for. If only I didn't need a Laptop for school next year I'd be so all over this ram :slobber:
Mushkin in growing in my asteem once again.

I know what you can do, make redlines for my laptop for next year :slobber:
:banana: :banana: :banana: :banana: :banana:
05-21-2005, 11:08 AM
HiJon89

Quote:

Originally Posted by Rabbi_NZ

My point is this... if you run 3.7vDimm don't go getting an RMA on the memory... whether or not the memory is damaged it makes no difference now because YOU HAVE VOIDED THE WARRANTY.

The site says they are designed to run up to 3.5V but never specifically states that going any higher voids the warranty.
05-21-2005, 04:55 PM
stealth17

will newegg sell these much cheaper than mushkin themselves?
05-21-2005, 06:15 PM
stealth17

someone PLEASE try this mem paired with Hellfires nf4 bios

http://www.dfi-street.com/forum/showthread.php?t=12168

people are having nothing but AWESOME reports about it!
05-21-2005, 11:07 PM
TEDY

REDLINE IN EU

http://www.cheeep.de/chips.php?op=mo...5193.95.218.14

226€ ....fak that's like 290$ :P
05-22-2005, 02:54 AM
Rabidmoose171

still not on newegg?!!? after 5 days?!?! well, they better have them by friday!
05-22-2005, 03:21 AM
B5I8

Quote:

Originally Posted by Unrealcpu

Had one stick die ,

RMA next week

Just to let you know, the sooner you send them out the better. Mushkin is taking quite long with my RMA. They've had my modules since this past Monday and they still haven't finished testing them yet :stick:. All I can say is they better send me out a new set first thing this week :slapass:.
05-22-2005, 07:13 AM
Soulburner

If they won't run the rated spec of 2-2-2 (only 2-3-2) can I RMA them?

I really don't want to, and would appreciate any ideas.

3.22v, 414-2
05-22-2005, 07:23 AM
stealth17

Quote:

Originally Posted by Soulburner

If they won't run the rated spec of 2-2-2 (only 2-3-2) can I RMA them?

I really don't want to, and would appreciate any ideas.

3.22v, 414-2

try running them 2-2-2 at 3.3v

thats what they are rated for
you MUST have a fan over them too
05-22-2005, 08:40 AM
JNav89GT

sould, did you ever test them in 1gb sets vs the full 2gb u have?
05-22-2005, 11:31 AM
Soulburner

Quote:

Originally Posted by JNav89GT

sould, did you ever test them in 1gb sets vs the full 2gb u have?

Yes I have, I have posted about 3 times saying 2x512 is the same thing, it will not go into Windows at RAS to CAS Delay 2, it reboots after the Lanparty BIOS logo.

I can try 3.3v but I don't think its going to help, they won't even run 2-2-2 past 230, and it takes 3.22v to do it...JUST like my old CH-5 / Intel...
05-22-2005, 11:53 AM
stealth17

Quote:

Originally Posted by Soulburner

Yes I have, I have posted about 3 times saying 2x512 is the same thing, it will not go into Windows at RAS to CAS Delay 2, it reboots after the Lanparty BIOS logo.

I can try 3.3v but I don't think its going to help, they won't even run 2-2-2 past 230, and it takes 3.22v to do it...JUST like my old CH-5 / Intel...

sounds like its just you lol ;)
05-22-2005, 01:42 PM
JNav89GT

sorry soul I didn't see your other posts.

I would indeed try upping voltage to 3.4 or so. Might help more than u think
05-23-2005, 02:36 PM
valenciaendoor

Is there anyone trying to reach max. mhz with Redline while cpu/ram=1:1 with loose timings.That is to say,are there any possibilties to reach for example 300FSB or more with these modules like 3-4-4-8?
05-23-2005, 02:39 PM
boostdfd3s

These are UTT type modules, they demand tight timings. For 300+ mhz speeds and loose timings, you want TCCD :)
05-23-2005, 02:44 PM
valenciaendoor

Quote:

Originally Posted by boostdfd3s

These are UTT type modules, they demand tight timings. For 300+ mhz speeds and loose timings, you want TCCD :)

I know this issue,but i came across that some people were able to reach 300FSB with 3-4-4-8 timings with UTT.I wanted to be sure about that.
05-23-2005, 04:34 PM
stealth17

"************* BACKORDERED est SHIP DATE 5/31 *****************"

WTH is this?!?!?!

and it went up to $272 :mad: :mad: :mad: :mad:

when the h3ll is newegg ganna list? :stick: :slapass:
05-23-2005, 05:28 PM
trans am

Quote:

Originally Posted by stealth17

ey?

Sorry,
I was just expressing my anger toward newegg. I guess they are too busy to bother with amazing ram. They are too busy playing Guild Wars to post any new products. :D

I can elaborate on it more if you PM me.

Originally Posted by stealth17
they are playing guild wars?

Originally Posted by trans am
yeah, so should you

Originally Posted by stealth17
you mean they play it at work?
05-24-2005, 06:15 AM
TEDY

hahaha 272$ ...OMG OMG OMG.
05-24-2005, 01:21 PM
jiff

Quote:

Originally Posted by Unrealcpu

i will try brb

Any news :stick:
05-24-2005, 01:45 PM
stealth17

YES!!!! http://directron.com/mushkin.html

ordered :) they have em !!!! $239 :) :)
05-24-2005, 01:59 PM
Dumo

2 Attachment(s)

Quik comparison with tccd. Will try it with 55BN which should have better memory controller...or is it?

Show 100 post(s) from this thread on one page