**[OFFICIAL]** Asrock Z77 OC Formula Overclocking / troubleshooting/ Discussion

Hey everyone.

I would really appreciate some input on my current OC.

Asrock Z77 OC Formula
i7 2700k
G.SKILL Ripjaws X Series 16GB (2 x 8GB), DDR3 1600 (PC3 12800)

My voltage OFFSET is -0.0015v

Voltage: 1.312v - 1.320v

Core Speed: 4692.0 MHz

Bus Speed: 102.0 MHz

Temps after hours of Prime 95 testing are around 69C - 75C and max out at 78C ( I'm using the Noctua NH-D14, but I think I applied a bit too much paste)

http://i144.photobucket.com/albums/r...BenchContd.png


Are my voltage and temps considered high or are they normal?

I've been running Prime 95 for over 10 hours now and am pretty sure this is stable.

Im a little uncomfortable with these temps. I'm looking for something that's safe to keep for daily use.

under 80c looks good to me mate

the board is easy pie on ln2 :) loooooove the rapid oc. lightweight and can open even on the bleeding edge of stability.

http://i.imgur.com/Ito0Z.jpg

Very efficient :D
http://i.imgur.com/HiD6y.jpg


http://i.imgur.com/GwlaQ.png

Now I know why Nick hasn't send me a board, even nOObs like I can OC with it :)

Thanks for the heads up Allen, it all became crystal clear :p

^not sure what you mean man

Awesome run Splave:up:

Is that 3226?

^ ES E1 :P good for 1m/32m/pf...my 3226 with the nice imc will run 4core 3d 6612mhz :D

^Didn't see the "ES" on your cpuz:)

My good ES E1 now stuck on code 3b probly imc already a goner:(

I will play with this board soon:)

ran some 32m the last 2 days :) had a blast.
http://i.imgur.com/lsrCf.jpg

Will have to reevaluate where my ram will go at 2500mhz or switch it up to bbse...seems to be limit of IMC. 100bclk and 2600mhz mem divider = 23 XD
Efficiency is nice at 2500, would be so epic 2650+

Single core 32m was sure a new experience as well. :P Board still lives so will keep pushing.

Looks great Splave, congrats .......might have to snag me one of these boards ....... :wasntme:

bootet 4/8@1,24V LLC1
Started SuperPi32 and then...finished:
http://www.abload.de/thumb/screenshot.77c7f6g.jpg http://www.abload.de/thumb/screenshot.787zcty.jpg

Golden Chip I would say :D:D:D

Good chip!! What cooler you use?

yes!
UPS...water!

^ how much do you want for it XD

bootet with 1,24, switched the selected Core to #0 and gone down to 1,23 - watch the result :D
http://www.abload.de/thumb/screenshot.81tqpe0.jpg http://www.abload.de/thumb/screenshot.823tq9y.jpg http://www.abload.de/thumb/screenshot.83mppi1.jpg

Your cpu it´s brother from mine :P

http://img32.imageshack.us/img32/397/fotobs.jpg

http://img43.imageshack.us/img43/2589/printbd.jpg

The llc is auto.... and i boot at 1,225... some times i can run with 1,216 but not very stable :(

Great

Gesendet von meinem GT-I9100 mit Tapatalk 2

My batch is unknown I think!
3216B695

@Nick
Is it possible to change the Multi per Core in OC Furmula Drive?

Quote:

---

Originally Posted by emertX

bootet with 1,24, switched the selected Core to #0 and gone down to 1,23 - watch the result :D
http://www.abload.de/thumb/screenshot.81tqpe0.jpg http://www.abload.de/thumb/screenshot.823tq9y.jpg http://www.abload.de/thumb/screenshot.83mppi1.jpg

---

Quote:

---

Originally Posted by Billy-The-Kid

Your cpu it´s brother from mine :P

http://img32.imageshack.us/img32/397/fotobs.jpg

http://img43.imageshack.us/img43/2589/printbd.jpg

The llc is auto.... and i boot at 1,225... some times i can run with 1,216 but not very stable :(

---

u guys found nice chips ...:up:

Quote:

---

Originally Posted by sergmann

@Nick
Is it possible to change the Multi per Core in OC Furmula Drive?

---

I was thinking about to do it ... but it helps nothing for extreme benching .. so i didnt ask them to build this function :shocked:

Awesome board:up:

Out of the box...Bios 1.42K

http://img211.imageshack.us/img211/3...enshot005n.png

^ Looking good Dumo!

Which mem and how much volts do you use therefore? I'll get my Platinum 2666CL10 saturday!

they are the Corsair Plats 2800C11-14-14 kit ,now with the timings at 11-13-13 at 1.65Vdimm

Quote:

---

Originally Posted by Leeghoofd

they are the Corsair Plats 2800C11-14-14 kit ,now with the timings at 11-13-13 at 1.65Vdimm

---

This mems is hynix CFR chip´s??