hey chew time to start a 5GHz (plus or minus 5Mhz) efficiency thread ;) > 32M, 1M, pifast, 3DMARK01 and 05 should be interesting too i reckon
loving the 01 action heh
hey chew time to start a 5GHz (plus or minus 5Mhz) efficiency thread ;) > 32M, 1M, pifast, 3DMARK01 and 05 should be interesting too i reckon
loving the 01 action heh
I would but i'm an AMD guy......I will let somone else start it or i might get burned at the stake :shocked:Quote:
Originally Posted by dinos22
hmmm i am a bit confused ... same proc, same ram ( perfect storm ) , same vc ( 5550 ) , same psu, same hdd ( wd 74gb raptor ) .... Ud5 spi 32m run @ 6m 35.xxsec while on my ud7 its 6m 37.xx sec ...same bios settings and same ram sub timings ... how come ud5 is giving me faster runs? I wanted the ud7 to be my main board ...do i need to set anything else ? or this board is really slower than ud5 ?
btw this is 5ghz run @ 2133 ram only
Hey guys, how did you get stable 2133MHz on MIVE with Hypers?
I can run 2133 7-7-7 at 4.5GHz, but on 5GHz I can't even get a 8m/32m loop no matter what settings I tried... On PSC, 2180 6-9-6 is not a problem...
Running 0950 on MIVE, will try 1092 today but I doubt it fix that
Have you tried the red slots as suggested in http://hardforum.com/showpost.php?p=...17&postcount=1 which states: "Elpida Hyper owners, please use Red Slots for best performance, CFG Lock to Disable should improve SuperPI times"?Quote:
Originally Posted by quake6
Am interested in your result as hypers stability (or lack of) is what's holding me back from getting the MIVE.
Well, I'm running red slots always, even with PSC, so I don't think it is because of that...
I'll try now new BIOS, but yesterday when I tried 1092 I corrupt windows :/ It wasn't stable at 5GHz even on 1866MHz. Maybe it was bad luck, will know in a few hours
EDIT:
With new BIOS, 1090, I can't even boot at 2133MHz :(
very nice runs chew :up:
found out for my gtx there isn't really the problem i thought with tWCL 6 1067+
but needs another step vdimm from wcl 7 or it freezes 32m (XP only)
there's still a performance difference to my blades at the same set subtiming
but now i doubt it's due to the tWCL.
noticed aida read/latency is also better on corsair, but not copy score which would show for tWCL
updated subs on corsair:
old 5ghz 1067 7-7-5 @ 6m32.578
new 5ghz 1067 7-7-5 @ 6m31.953
timing change from previous
tWR 12 to 8 = -0.25s approx
tWCL 7 to 6 = -0.4s approx
OS etc unchanged (XP sp2 not nlited)
100.0 x50 (100.2 bios set)
http://i447.photobucket.com/albums/q...3_GTX2_F6D.png
99.5 x55 (99.7 bios set)
max on 55x for booting ~5480 so far, and ~10mhz lower on 54x
http://i447.photobucket.com/albums/q...4_GTX2_F6D.png
and this runs ok :)
4x2GB
cpuz 1.56 showing vtt/vccio
(click for full)
http://i447.photobucket.com/albums/q...GTX2_F6D_c.png
8GB Hyper.. Pi
these are all 7-7-6 as my OCZ (probably) won't do tRP 5 @ the clocks/vdimm i used
stick scaling > 2 .. each stick added gives approx equivalent 32m gain tRCD-1
eg for 32M performance
4x2 @ 7-7 = 2x2 @ 7-5
3x2 @ 7-7 = 2x2 @ 7-6
max runs are cpu clock limited, atm still above 6mins
i have just enough clocks on 55x (5480) to do it on 54x
but so far the 54x has lower bootable max ... working on it :up:
100.0 x50 (100.2 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
100.0 x54 (100.2 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
99.5 x55 (99.7 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
99.5 x55 (99.7 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
101.0 x54 (101.2 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
101.2 x54 (101.4 bios set)
http://i447.photobucket.com/albums/q...Z_GTX2_F6D.png
101.5 x54 (101.7 bios set)
estimated 5m59.8x
Very very nice :up:
cheapseats a step ahead :up:
cheapseats, any reason you're running 8GB?
Very nice cheapseats, I see you managed to get over your 6m4s problem rather well :up:
@cheapseats great runs , and thanks for shearing.
:clap::clap::clap:
hey thanks guys ! :D
bassplayer.. 4x2gb with rank interleave enabled = higher 32M performance than 2x2 at the same clocks/timing
it's the same for other intel platforms but seems SB can run higher clocks easily in this config
and there isn't the problem of not detecting sticks like previous IMC.
there was no vdimm increase for extra sticks :)
Massive congratulations Nick, props to you for going the 8GB Hyper way :D :up:
lol! ud5 can do 8gb of hyper at 300mhz+ higher speed then the p8p67 deluxe can with 4gb of hyper!!
SoF
here's a video i made to show droop is ok on this P67A-UD3R
in testing up to 1.55v with wprime ive seen droop go down by up to 0.024v which is pretty good, lower volts say 1.4 it would only droop 0.01v which is great. I didnt see any crazy droop some others mentioned. Im thinking the droop may not be enabled in some of the setups mentioned they droop more
for superpi there is no droop at all you get exactly what you set in bios
http://www.youtube.com/watch?v=a9Ziq8ESPfQ&hd=1
the board overclocks pretty nice, its responsive, seems to clock ram nice (havent done much testing with this CPU in terms of ram clocks in the past to compare). I can boot into windows with these settings 1123Mhz ram, not too bad :up:. I have to put a CPU i know does certain speeds and timings and then see how hypers go on it. I did a quick test on this board with hypers and had to use 2T with this chip so not sure if its the CPU or bios.
http://img3.imageshack.us/img3/739/1...32msuperpi.jpg
18 chips later we found a 5743 through vantage HT on 1.575vcore chip.
Some 32m this weekend :cool:
Oh :banana::banana::banana::banana: :D
why the fluck would you test vantage with a CPU you want to run pi on :D
Wanted to make sure we didn't have to run off that 3rd :banana::banana::banana::banana:ing core again that killed our effec.Quote:
Originally Posted by dinos22
It was on DI anyway, cpu is fine, being ginger with voltage.
Also I think 32m degrades cores IMC wise, no sense degrading it with the set of ram I let him borrow, 9-11-9 2000? waste of 32m runs if you ask me :p:
Nice:up:Quote:
Originally Posted by chew*
Freez it probly better. No sense to run it high with air or even h2o
Just got a second 2600K here, but is a 56ers chip
Water may be more of a necessity for 32m, all depends on chip really.Quote:
Originally Posted by Dumo
still knockin' my head for sub 6 minutes ^^
http://img341.imageshack.us/img341/7990/326min0375s.jpg
new asus-bios seems to max out cpu a bit better :)
http://img812.imageshack.us/img812/9935/1m55966625.jpg
Sry for the noob q, but can you guys give me a hint on how much time I can expect from wasa and/or cdt on a 32m run just above 6 min without ?