Gigabyte GA-P67A-UD5 Discussion Thread

I received word back from Taiwan last night in regards to Easytune and Bclk, and they have figured out what is causing the issue!

You must install Intel Management Software from the motherboard install CD.

So for anyone having issues with Easytune and changing Bclk as seen below, please install the following software from your install CD.

Issue:

http://img502.imageshack.us/img502/8...notworking.jpg


Resolution:

http://img407.imageshack.us/img407/7...ntenginein.jpg


Problem solved!

http://img15.imageshack.us/img15/101...uneworking.jpg

Big thanks to the Gigabyte team, I spent many hours trying to find the cause of this and I'm sure others have as well!

Gigabyte rocks as always!

Now ask them why so many of us are having ram stability and incompatibility issues @ 2133+..................

LOL, the IRONY of this THREAD !!!!

Im perfectly stable at 2137mhz CL7-10-7-27 1T+ Turbo function on my memory menu + 4.9 GHZ CPU but the damn thing would not COLD boot properly at these settings or any other settings for the memory. But once it boots up after the second bios SAVE & EXIT it mops the floor with any NAHALEM out there... :ROTF:

Quote:

---

Originally Posted by TurboDiv

LOL, the IRONY of this THREAD !!!!

Im perfectly stable at 2137mhz CL7-10-7-27 1T+ Turbo function on my memory menu + 4.9 GHZ CPU but the damn thing would not COLD boot properly at these settings or any other settings for the memory. But once it boots up after the second bios SAVE & EXIT it mops the floor with any NAHALEM out there... :ROTF:

---

Yeah it really is starting to get old now. Gigabyte needs to get on the ball and get a good bios out to us. The board is wonderful minus the dang bios.

Absolutely, this is a wonderful board but enough already.

I told you guys that the COLD BOOT (after shut down for a few minutes and than boot up) issue is connected with a PCI card. Look what i found:

http://forum.giga-byte.co.uk/index.p...ic,4157.0.html


PCI vid card = no boot for the guy. Im gonna have to try and remove my PCI sound card and see if i get the cold boot problem.

We need some1 here to collect all the issues and dump it to a Gigabyte engineer and lock him up in a room until fixed !!!

He mentioned that he did insert a PCI sound but the thing is its different than vid card and for me it doesnt cause BOOT LOOP, but failed clocks after shut down and boot up.



ps; im evil. :devil:

Quote:

---

Originally Posted by TurboDiv

I told you guys that the COLD BOOT (after shut down for a few minutes and than boot up) issue is connected with a PCI card. Look what i found:

http://forum.giga-byte.co.uk/index.p...ic,4157.0.html


PCI vid card = no boot for the guy. Im gonna have to try and remove my PCI sound card and see if i get the cold boot problem.

We need some1 here to collect all the issues and dump it to a Gigabyte engineer and lock him up in a room until fixed !!!

He mentioned that he did insert a PCI sound but the thing is its different than vid card and for me it doesnt cause BOOT LOOP, but failed clocks after shut down and boot up.



ps; im evil. :devil:

---

No pci card in my machine. My auzentech forte is pci-e.

You still have Failed Clocks after shut down and boot up ?

ps: I think they made it extremely sensitive because of that Dual BIOS mumbo jumbo...

I got some more 3DM action for all. everything was run at 5600mhz at 1.60v except for Cinebench R11.5 which was 5570mhz at 1.58v. Chip still runs great.

Great job man! :up:

39k+ in 06 with a single card :shocked: one hell of a rig you have. Congrats!

Thank You sir, actually its my torture rack system. I have three in this room but that one is special made just for benching hardware. The 480 is EVGA fitted with a EK nickel finish Supreme HF block. I want 40K in 06 and 50K in 05. Its gonna happen.

@ flesheatinvirus

Very strong results there :toast:

Quote:

---

Originally Posted by flesheatinvirus

I want 40K in 06 and 50K in 05. Its gonna happen.

---

Love it..... nutter :up:

flesheat nice results bro, does it pas 32m?

Thanks again C-N and Johnny87au. Yes it can pass 32 meg though I have not really tried for a killer score yet, currently 6.29 min run.

Quote:

---

Originally Posted by flesheatinvirus

I got some more 3DM action for all. everything was run at 5600mhz at 1.60v except for Cinebench R11.5 which was 5570mhz at 1.58v. Chip still runs great.

---

Cracking scores mate!

i need to buy a new cpu :( batch A660 can only do 5.3ghz ... it will boot at 5.5Ghz but after the POST it will not load windows ...it will just have a blinking cursor on the top left of the screen :( Are there any other soution for this one? Bot ud5 /ud7

Vcore - 1.55 and above ( up to 1,6 )
qpi - 1.2
pll - 1.8
dram - 1,66
pch - 1.05 up to 1.15 during testing
ram running below rated speed. am runniong my gskill PS @ 1600 or 1866 and 9-9-9-24

Quote:

---

Originally Posted by bartman1973

i need to buy a new cpu :( batch A660 can only do 5.3ghz ... it will boot at 5.5Ghz but after the POST it will not load windows ...it will just have a blinking cursor on the top left of the screen :( 9

---

I just had a look on HWBot & the best 2600K @ 5.8GHz is not using the max multi think its something like x55 + some bclk..... there are a few chips in there using low multi & higher bclk it might be worth playing with your chip as x53 & 104 = 5.5GHz

Quote:

---

Originally Posted by bartman1973

i need to buy a new cpu :( batch A660 can only do 5.3ghz ... it will boot at 5.5Ghz but after the POST it will not load windows ...it will just have a blinking cursor on the top left of the screen :( Are there any other soution for this one? Bot ud5 /ud7

---

I know many people here would love to have a chip that can use mp 53. There are plenty of chips out there that cant even use 50.

Quote:

---

Originally Posted by Sniper

I know many people here would love to have a chip that can use mp 53. There are plenty of chips out there that cant even use 50.

---

thats suck :/ u need to have luck for get better clocks. whats making 2 cpu different than each other? silicon quality only?

Quote:

---

Originally Posted by aytacaksel

thats suck :/ u need to have luck for get better clocks. whats making 2 cpu different than each other? silicon quality only?

---

The only skill in overclocking is getting the best out of what u got.... the rest is luck.

Quote:

---

Originally Posted by C-N

The only skill in overclocking is getting the best out of what u got.... the rest is luck.

---

Yh thats what it all boil down to!:yepp:

Quote:

---

Originally Posted by bartman1973

i need to buy a new cpu :( batch A660 can only do 5.3ghz ... it will boot at 5.5Ghz but after the POST it will not load windows ...it will just have a blinking cursor on the top left of the screen :( Are there any other soution for this one? Bot ud5 /ud7

Vcore - 1.55 and above ( up to 1,6 )
qpi - 1.2
pll - 1.8
dram - 1,66
pch - 1.05 up to 1.15 during testing
ram running below rated speed. am runniong my gskill PS @ 1600 or 1866 and 9-9-9-24

---

I'll gladly take that CPU off your hands.
What vcore does it need for 5 ghz?

Quote:

---

Originally Posted by aytacaksel

thats suck :/ u need to have luck for get better clocks. whats making 2 cpu different than each other? silicon quality only?

---

2 cpu's produced next to each other can clock very differently. Microscopic differences and impuritys make them all unique.

But there is still some merit to the batch hunting, some batches produce a higher number of good chips compared to others.

So bying one chip from the net without even knowing batch is pure luck. Checking batches in forums etc might improve your chances by som percent.

Bying more than one chip increases your chance for a good one even further.

Asus tested 100 2600K, and without "Internal pll overvoltage" they found this:

1. Approximately 50% of CPUs can go up to 4.4~4.5 GHz

2. Approximately 40% of CPUs can go up to 4.6~4.7 GHz

3. Approximately 10% of CPUs can go up to 4.8~5 GHz (50+ multipliers are about 2% of this group)

So if you buy 50 2600K, one of them should do 50+ mp.

With "internal pll overvoltage" enabled in bios you should add 3-5 more mp and that is the odds.

Later batches might push the percentages in either direction from what Asus found, and that is why we are all hunting :D

A center wafer chip is killer no doubt.

Hey C-N, Yeah, there's more then just luck that's skill and know how LOL Great OC and Benches