Hey guys and girls... can I join your club?
batch number is 3912A859
Printable View
Hey guys and girls... can I join your club?
batch number is 3912A859
That's a very nice result, congrats and welcome to the club! :up:Quote:
Originally Posted by Enzo78
Enzo78,very nice.great vcore for 4.66Ghz.thats one of the better
39 chips ive seen.thats the kind of vcore you'd expect to see with 38 batches:up:
Always nice to join a cool club ;)
From what I have read on these here forums is that its the strength of the imc in the chip that allows higher bclks? I can boot into windows at 225bclk 1.34qpi/vtt so there maybe abit more in the chip yet.
New submittion @ 1.36v
http://img29.imageshack.us/img29/491...120mb13.th.png
Same CPU as above. :)
I can't believe there is only a single socket 1156 CPU :eek:
Makes me feel so much better about my 4.82ghz quad prime stable (30min++) i7 860 @1.44v; good 24/7 cpu. Only does 4-5 passes of Linx though so unfortunately I won't be joining the club. I was thinking about spending a bunch of time tweaking and getting a #1 spot for the i7s (would be hilarious to see a 1156 cpu as #1), but the recent submission of 4.84 is definitely not something I can surpass. 4.82 would already be at my limit for 20 passes of linx.
I can't believe I got such a good CPU. This chip + more capable hands + LN2 = all CPU 1156 WRs.
Everything is always surpasable, all you need is "the will" and the "means"Quote:
Originally Posted by One_Hertz
So just get to it and do it......................by the way..........i have already got a better clock than that anyway...........so just aim a bit higher :)
I would need a better mounting mechanism for my single stager. I am using socket 775 mounting for 1156! Yes, it is as horrible as you are imagining it. Backplate had to go and a few things had to be made on the fly and the contact still isn't good. Temps as high as 10C when Linxing with -35C evap temp.
I mean to be taking this spot back very shortly again. ;)Quote:
Originally Posted by One_Hertz
The load temps @ 4.8GHz w/ my craptacular single stage were ~ +12C under load. I am sure w/ -100C I should be able to squeeze a bit more juice out of this CPU.
i'm waiting i expect to see 4.9+Quote:
Originally Posted by lowfat
i got my loop up and crunchin wgc @ 4.3+ht 40-50c:yepp:
maybe one day i might join da club
told ya i be back:D
can only run 4gb i have 6gb in but windows won't see 2 after 225blk
cooling mcp320+gtz+jeep heater rad+655+some cold air
batch #3849B018
i'll be back :D when i sort out cooling +ram issues
and go higher;)
I know why your system runs hot! There's the problem right on your desktop! :DQuote:
Originally Posted by zsamz_
Well finally i can join
changed rad and block and can linx at ~1.4vcore at normal ambient temps 22 to 24C, before i had to hit 10C AC to the rad
either way temps are high but system holds it before it was a < 1sec BSOD :)
http://img12.imageshack.us/img12/408...1600linxxs.png
Cheers guys :up:
Sergio
zsamz,wow!! very nice
andressergio,nice.looks like the USB3P is just as good as the UD3P
You only using 3GB of ram? 20min of LinX is not something I would generally consider stable.Quote:
Originally Posted by zsamz_
Thanks radaja yes better and improved but picky with mem as always need volts but its easier on ddr3 i was wondering if the 2x2 Gskill PI 2000 CL6 will work on this board that ram looks awesomeQuote:
Originally Posted by radaja
Cheers :up:
Sergio
thanks manQuote:
Originally Posted by radaja
andressergio lookin good:up:
with the pi max i did on rex was 1940mhz 6-9-8-24 stable over 1940 not even volts help
and i did it with e8600;)not a quad
i put in 6gb windows sees 4 i put in 4 windows sees 2:rofl:Quote:
Originally Posted by lowfat
i'm not goona run linx with 12gb:rofl:
tried primin n was a peice of caked compared to linx:rofl:
hey i'm game stable too:D
i thought the minimum was 2GB installed?so that run should just fine.Quote:
Originally Posted by lowfat
on my i7-920 i only had a 4GB kit on hand and it was ok.i picked the
max memory setting and it was just over 2500 and it was ok.
Quote:
You must have at least 2GB of memory installed in the system.
Screenshot must show a CPU-Z window with 4.5GHz+ frequency.
Screenshot must show a LinX window (max memory settings, click "All" button, or pick the last memory size option from the drop down menu, the "All" option is highly recommended) either running the 20th+* loop with no errors, or with 20+* successful passes.
You actually keep it at those clocks w/ 1.5V+?!?! You got some balls if you do.Quote:
Originally Posted by zsamz_
Ya he definitely qualifies for this thread. I was just saying only 20 minutes of LinX isn't exactly a good test to determine stability.Quote:
Originally Posted by radaja
no big loss if the board goes lolQuote:
Originally Posted by lowfat
i get to buy the rexIII
:yepp: i dont go with just linx i primed also
30 min of l4d2 and 30 min of call of duty4 is real test 4 me
i'm tryin 230blk+ but i need to get water a bit colder i dont make it past 1 min
Are you kidding me? Linx is crazy overkill as it is.Quote:
Originally Posted by lowfat
30 seconds of linx stability = no games will ever crash.
Hell I used to run a CPU that would fail prime after 15 seconds and nothing ever crashed. For people that fold it is a different story of course.
Well I guess it depends on your usage. W/ 9GB installed I do 100 passes. As I've seen it fail @ 50 passes and my machine wasn't stable enough for me.Quote:
Originally Posted by One_Hertz
And zsamz_ it won't be the board that dies, it will be that nice CPU of yours.
well i gettin 12gb of dominator gt so i doubt i gonna be able to run that high with 12gigs we shall seeQuote:
Originally Posted by lowfat
dont worry you can still do 4.8Ghz,i can help you with that problem.just send me 6gigs.problem solved:rofl:
I bet you won't have a problem. I run fine w/ all 6 slots filled. I even did it up to 237blck. When I added the additional 3 sticks I didn't even have to increase any voltages.Quote:
Originally Posted by zsamz_