Yes, I have that BIOS. And I have tried all of them available, including Albatron.
Printable View
Yes, I have that BIOS. And I have tried all of them available, including Albatron.
Anyway, can someone explain me this problem; If I turn on my PC with FSB at 266, RAM 1:1@4-4-4-12 and then I go to BIOS, change the FSB to 450, then everything is OK. Orthos stable, 3DMark loop stable, SuperPi 32M..BUT, if I turn it off at that FSB (450), and then turn it on again, it will freeze in windows in about 5mins with doing sth or not doing anything. It is just unstable totally. So, what could that be? I guess sth got changed after power off.
and btw, can someone with GoodRam Pro tell me his timings with tWT, tWTR, tRRD and tRTP?
what's ur PSU anyway??
it could be just a matter of electricity
another question can it be a totally stable at ....let say it 400 maybe?
if it so..then maybe it's ur cpu..Intel sometimes act weird like this :D
Antec 480W, 2x18A 12V. Yes I think it is stable, but havent test it that hard yet. But, if the CPU is totally stable at 450 when setting FSB to 450 after booting at 266, then I think there is nothing wrong with the CPU. And as I said before, this CPU has been running for couple of months at 510 on P5B DX. So I guess this is a mobo/ram/PSU problem.
Anyone here?
Well, it is NOT stable at 420, it locks up just the same as at 450. Now I am running at 400. So, what could be the problem?:)
You need better memory. The Biostar does not like your memory....
OK then!:) Will try some other ram. Any suggestions?
hello everybody, im gettin a 965pt for christmas and i was gonna pick up some geil ram and wanted to know if the board would play nice with the ram. im not sure wut ics r on the ram so i would like to find that out if possible. heres a link to the ram check it out tell me wut ya think. im doin this low budget steppin up to pcie and ddr2 with lil money. i will upgrade more in summer. cheers
http://www.newegg.com/Product/Produc...82E16820144325
GeIL was tested on Anandtech, and it has done a great job. The Ultra, not the Value one.
btw, anyone here with GoodRam Pro on this mobo?
Did anyone try new BIOS?
Deluxe? Only some GX2 support improved I think.
just ordered one of these boards(the pt version) will have it goin this weekend with an e6300, super talent 512mb cl5, biostar 7300gs and will be flashing it to the mod bios right away. im goin for high fsb and hoping to hit well over 500fsb:) . i will post results as soon as i get them as long as everything works fine.
Quote:
Originally Posted by GaS
i got this ram because of this but it was geil ultra back when they used d9 now they use something else.
anyways i strugle to get ram past 440 cl 4-5-4 and it wont even do stock 4-4-4 @ 800 lol. anyways im sick of playing ram games so i just change my e6300cpu for e6600 so 440 ram makes cpu 3960 i think i have plenty of headroom now lololol:D
This board seems to have issues. There's an fsb wall somewhere between 440 and 450 with my D9 Fatbody 1:1, however I can get my memory running 500+ with a divider fine. My cpu isn't limiting me I dont think, because I can do 440 FSB at less than 1.4 volts no problems.
Can someone running at 500 or 500+ post a screenshot of their memset settings? Thanks!
Change CAS 5 in BIOS, and use MemSet or similar application to set it back to CAS 4 in Windows if its needed. This should get you rid of it.Quote:
Originally Posted by Doom5
I can run 4-3-2-8 no problems, going up to 5-5-5-5 makes no different, voltage makes no difference. With a divider I can run the memory at 500+ no problem.Quote:
Originally Posted by Zebbo
What BIOS you have in at the moment?Quote:
Originally Posted by Doom5
Tried all of them. Stock 9/14 bios, RH 9/14, the new bios that just came out in december on biostar's site, with a 9/21 date on the bios, the albatron 11/10 bios, and stilt's 8/03 bios. Same results in every single one of them.Quote:
Originally Posted by Zebbo
I have almost the same problems like Doom5. It is just memory incompatible. Just that:/
Anyone know where to get one of the non-PT versions (ICH8R southbridge) in NA? Dam hard board to find it seems. :rolleyes:
can anyone tell me why my multi is stuck at 6x?ive got the pt version.ive tried everything i can think of to no avail.please help!im losing my mind here!
Set CPU Feature options to disable.
So, which is the most compatible/overclockable ram for that mobo?
any d9 chipset.
other chipset is not recomended