If someone out there have a 170/165/175 with a good stepping wich overclocks good, contact me, I need one! and i pay you well!
Opteron 0530 TPWM, Opteron 165 CCBWE 0547TPMW, Opteron 170 CCB1E 0550VPMW
Printable View
If someone out there have a 170/165/175 with a good stepping wich overclocks good, contact me, I need one! and i pay you well!
Opteron 0530 TPWM, Opteron 165 CCBWE 0547TPMW, Opteron 170 CCB1E 0550VPMW
I've got a Opteron 165 CCB1E 0550VPMW and its awesome!Quote:
Originally Posted by Wiker
So far, I've got 2.7 GHz @ 1.43V on air. I will try for more once I burn in some.
If I could get to 2.8, I'd be really happy.
Whats well :)Quote:
Originally Posted by Wiker
Err, this isn't the FS section.:stick: Mods might get to you.Quote:
Originally Posted by Wiker
YGPM ben805!
What does a good stepping have to do with it?:confused: If it would do 3.0@1.5v, I wouldn't care what the stepping was. Some 0530's don't clock great. Clocks are the only thing that counts.:DQuote:
Originally Posted by Wiker
And a little luck and skill plays its part ;)Quote:
Originally Posted by dogsx2
Post deleted. The answer was Systool.
165 CCBWE 0551 UMPWQuote:
Originally Posted by mongoled
2.74Ghz at 1.46v, OCCT & Dual Prime 95 stable.
I'm happy with my 165. 24-7 Settings on Air w/ Zalman CNPS9500.
Chip came from NewEgg 0550 UMPW. 13hr Prime large FFT Max temp was 38c.
300*9 for 2700mhz. IHS is on. Voltages are stock.
http://img227.imageshack.us/img227/345/untitled8pp.jpg
AMD64 TCaseMax - v1.17
----------------------
CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 3, Stepping: 2
Extended CPUID: Family: F, Model: 23, Stepping: 2
CPUID String: 20F32
Processor APIC: 0
Processor: Dual Core AMD Opteron 165 (Toledo)
CPU Speed: 2700.73 (300.08 x 9.0)
Revision: JH9-E6
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 49C
TDP: 35.0 Watts
300 2.5-4-3-5 x9 2.7ghz 1.43v
Just got my 165 0550 UPMW from tankguys.
I have a question.. I'm a long time intel ocer, but this is my first amd oc. Is there a limit to how high I can take the htt? I'm just wondering if I'll be able to max out this cpu with the low 9x multiplier. As long as I drop the htt mult to 3, I can take it over 315, right?
Do you know what your boards max HTT is?Quote:
Originally Posted by bmac11
why are memory bandwidth scores so much lower on dual cores than single cores.
I was getting 7700/7600 with my 146 @ 10x292, and now I'm getting 7100/7000 with my 170 @ 9x300- both with the memory 1:1.
I would think the DDR600 would score higher in the bandwidth test??
CPU clock speed has a much greater affect on bandwith since the memory controller is on die. So the faster the cpu the more bandwith you will get.:fact:Quote:
Originally Posted by cdelong
That makes sense now that I think about the fact that the memory controller is on the die.
I was wondering why my bandwidth scores dropped so much when swapping to the 170. I statrted thinking of reasons and the CPU speed came to mind, but didn't completely make sense to me because the RAM was running DDR600with the 170.
I guess the scores look to be in line.
Opti 165 CCBWE 0550 UPMW, 3Ghz 1.39v. Very nice to find an opti with no cold bug, but the insane heat kills my cooler with more volts.
http://members.shaw.ca/zryan/165-5.JPG
eldonko, what temps would you expect to get on air with that setup (3ghz @ 1.39v)
3Ghz wouldnt even boot on air. My max with h20 is 2850 and temps were ~38C load. This chip works best at low volts, way too much heat coming from more than 1.45v.
Iam running now mine 0550 Opty 170 UPMW for 1 week 2 days 24/7 full load dual folding 1.48V at 3120MHz temps are around -10 to -9 with mine modded Prometeia Mach I...........
http://img78.imageshack.us/img78/411...emps4bo.th.jpg
thats pretty amazingQuote:
Originally Posted by ThorLite
any clue what it would/did/could get on air?
No,i only used it under the prometeia.......Quote:
Originally Posted by terrordemon
Quote:
Originally Posted by ThorLite
-9~10'C at 3.12Ghz is nice, mine scale about the same as yours but underload during dual prime mine was at around -1C, now give it about 1.55~1.58v and crack 3.20Ghz man ;) :D
I've been working with a 165 for a week or so now. From my testing I have to conclude that Core 0 ain't so hot. I can't get the thing to do 2.60 at 1.5v. Core 1 is a champ compared to 0; it seems to have a far higher ceiling...
Has anyone else run into serious disparity between the two cores? Has anyone popped off the IHS and seen a horrid goop job or poor unflat IHS that could cause this?
Right now I'm sticking with 2.50GHz at 1.46v.
Yeah could'nt beleive how these Opteron Dual cores kill my temps under load I get around -1 -3 dual primed heres my first go at 3000 last night going for 3200 tonight anyone have a rough Idea what vcore that will take with a CBWE 0550UPMW.Quote:
Originally Posted by ben805
3160 32M 1.5x1.04 in BIOS will continue up to 1.6 to see the limits of the cpu.......
http://img71.imageshack.us/img71/856...31604rk.th.jpg
I give 420$ for a opteron that does 2.8 Ghz primestable on air.
if 3.0Ghz needed 1.50v and underload temperature already close to 0, then I would assume it's possible that you might need 1.6v for even 3.1Ghz, your underload temperature probably will shoot up to +5~10'C. I'm sorry but you might not crack 3.2Ghz to do prime unless you yank the IHS. double check your mount and see what happen.Quote:
Originally Posted by rapty
Yes valid point but you don't really know untill you try.
I was thinking about removeing the IHS tommorow if it does'nt prime how can I mount the evap head on the core without cracking it when tightening the screws.
I am not 100% sure about phase change, but with a waterblock, simply put some little round rubbers (like those on AXP).Quote:
Originally Posted by rapty
Quote:
Originally Posted by rapty
glue some foam type feets on four corner like the socket A, or put two layers of electrical tapes around the core to protect the tiny caps and also aid cushioning to prevent crush core, that's how I've been doing for many naked core without any issue.
Here is how I prep mine:
http://www.xtremesystems.org/forums/...chmentid=40149
looks very nice Ben :worm:
Popped the copper top off my Opteron. Was fun. Soaked it in Oops! for a hour then ran a electrical-taped hobby knife around the perimeter and it fell right off. The silicone sealant they use is rubbery and can be scraped off with a plastic "instrument" (something plastic and hard).
I reattached the IHS with two dabs of silicone sealant at 2 edges and used AS5 on the core. I noticed when I removed the IHS that it looked to be only making solid contact at the middle. What probably happens is they put these IHS's on and then dont put pressure on them and they dry without properly compressing all that sealant and paste. And the paste they use hardens somewhat. Now, my temps are down 7C or so and I definitely have some more headroom. Nice.
Careful with the pins tho! Use the foam pad it came with or you will bend them and there are a TON so it's a pain to bend 'em back. I bent a few and that was enough. Scary stuff there.
Put the Opteron next to a true man's CPU for scale reference. :)
http://home.new.rr.com/swaaye/swaayeoptynaked.jpg
Is there someone that has take off the IHS from an Opteron 0550 UPMW (better if 175...) and use AIR COOLING?
If yes, please post result before and after the surgery!
Is there someone that has take off the IHS from an Opteron 0550 UPMW (better if 175...) and use AIR COOLING?
If yes, please post result before and after the surgery!
I'm now running my Opteron 165 0550 UPMW at 2.5 GHz/278 HTT on 1.26V (1.3 V in BIOS), 0.05 V below default. :) I haven't gone further, I'm stopping for the night to see if it will crunch 2xSETI until tomorrow, then I will continure to clock higher again, or lower the Voltage more. Temp 52 C under SETI load with my Thermalright XP-90 air, all fans set to quite low noise level. ;)
Earlier I managed to creep Super-PI 1M stable at 1.28 (1.325) V up until 2.67 GHz/298 HTT, but I'm not sure if the chipset (1.6 V) or the CPU gave up there. When I upped to default 1.31 (1.35) V, it crashed out earlier on 285 HTT for some reason. Temps reached 60 C during Super-PI. :nono:
In reply to Ji 4Tze
1009 bios.
I personally found it to be more stable than 903 and less buggy than 703.
Hope this helps
Don't know if this is true but I have heard the CCBW1's have something in common with the FX60's ;)Quote:
Originally Posted by Ackbar
CCBWE 0551VPMW:
289x9 = 2600mhz at 1.47vcore. I can't even get to 2650 with 1.6volts :(.
I'll attach screenies sometime later.
Just threw in my 165 and its running a little hot. I only have it at 225x9 1.3v and its at about 40*c idle. I might of used too much as5, but I did tighten down the Big Typhoon pretty tight so I don't think it should really matter. Any suggestions?
Hi, I have an opty 165 CCBWE 0551UPMW which max out at 314x8,5= 2,7Ghz with 1,6 volt. Pass dual super pi 32MB n dual folding for 12 hours, but can't get higher result on air.. Seems like week 51 aren't good chips:(Quote:
Originally Posted by Kobalt
Don't use a lot of thermal paste. Use a very small amount and spread it very thin, and then tighten down very hard.
You might want to remount
I'm disappointed with my Opteron 170 0546SPMW brought from mwave.com, which can only reach 2.45Ghz /w 1.45v. :( memtest works fine but superpi crashes in 5 min @2.5Ghz /w 1.5v. Didn't try higher vcore because my PWMIC was over 60*C (CPU was about 42*C though).
I'm thinking about getting a Big Typhoon (currently I'm using the stock HSF /w heatpipe), but I doubt it will help since the CPU temp isn't a problem.
I've always used lots of as5, and never had any heat problems, even with my current Opteron 170.
Just my :2cents:
Quote:
Originally Posted by Ji 4Tze
already answered :)Quote:
Originally Posted by Ic3man
Got an opteron 165 CCBWE 0551 VPMW sitting here, was hoping for another 0550 UPMW. Well this is going up on ebay, does anyone know who is still selling the 0550? (If you recieved one recently, please let me know!)
I bought my 165 from there a week ago. It too isn't such a hot overclocker. But I popped off the IHS and it gave me about another 100MHz at the same voltage. Almost 10C drop in temp even with the IHS reattached with AS5 and some silicone. Mine was only making good contact with the center of the core, and the paste was hardened leading me to believe that the IHS wasn't pressing against the core well.Quote:
Originally Posted by dickeywang
Still, I'm not getting 2.7GHz or higher. Right now the best I can do is 2.6GHz 1.46v. I'm not putting higher voltage thru a 24/7 rig.
That sucks about your CPU! Unfortunately, overclocking isn't guaranteed... I've been really happy with mine so far. I can do 2.6GHz with near stock voltages, and 2.7GHz with 1.45V. I've got a CCBW1 0550VPMW... I wonder what the difference between the CCBWE and CCBW1 is. Aside from that, your CPU is only one week off from mine.Quote:
Originally Posted by Kobalt
anyone with Asus a8n32-SLI deluxe and dc opty can tell which BIOS is using?
I'm running @ 2700mhz 1:1 @ 1.47v
CCBWE 0551vpmw
I've been following this thread for about a month and now I'm all confused. Information overload if you ask me. Can someone answer me this: What stepping should I look for to get 2.7ghz on air with low voltage?
0543/0546/0550/0551Quote:
Originally Posted by cdelatte
:woot: Caught a 165 0550 UPMW from Tank Guys today! These guys rock!
0551 VPMW up on ebay, not going to bother opening it and testing it.
I have a 165 0550 upmw that the second core is not stable @ 2.7 no matter how much or how little voltage I added. (boots into windows at 3ghz with just 1.4 volts. I had a 165 0546spmw that would not dop 2.7 stable no matter what. And I had a 0541rpmw Opteron 170 that would not do well either. My current Opteron 170 0543TPMW only does well to 2.6ghz with 1.475. No matter how much voltage I put on it it will not go any higher. If someone is willing to give up one that does 2.7ghz stable prime for 24hrs I would be very interested!
You forgot 0530 and 0547 ;)Quote:
Originally Posted by Supertim0r
wow.. their inventory must change quickly. I've been checking their site often.. I want a 170 0550 upmw. I don't think I'll ever be happy with the 9x from the 165.. especially if I ever go back to phase.Quote:
Originally Posted by foodfightr
The 165 is OOS now. Didn't get a chance to grab one.:(Quote:
Originally Posted by bmac11
It's hard getting to 3ghz with a 9x multi. A lot of times, the board will limit your overclocks. Most boards can get to 300htt, but a lot more beyond that is a real challenge.
What kind of temps are you getting with your 90?Quote:
Originally Posted by cdelatte
Quote:
Originally Posted by dogsx2
I changed that out with a thermaltake with the 120mm fan and I am now getting around 45C with 1.475 volts w/ full load and 74F ambient temps. Idle I get around 30C. I'm beginning to wonder if my PS can't hold up under load for some reason.
I seem like there must be something wrong when with 3 different cpu's you can't get 2.7 stable. Or, you on a roll of getting poor clockers.Quote:
Originally Posted by cdelatte
LOL. Basically ALL steppings MAY be good. Just remember that nothing is guaranteed with this stuff, ever.
Some technician at the plant is in the clean room stirs up a single dust particle which slips into the ubermachine...next thing ya know you have a whole batch of de-uberized chips with da "uber step"!
Hahaa, "de-uberized". Well it figures:slap: :fact:Quote:
Originally Posted by swaaye
Anyway, hopefully tomorrow my 165 0550UPMW will finally arrive. Will be posting some results soon :toast: (I hope :stick: )
i'm happy with my 165 @ 2.7 (TCCD 1:1 2.5-3-3-5)
it's running @ 1.47v... idle 23-24c load 41c with a simple zalman 7000ce led :)
waiting to build a phase change next month to upgrade (something not cold bugged :confused: )
Quote:
Originally Posted by dogsx2
:D I think it's the latter. I'm going to try my 0550 again before I sell it. Maybe reseating it again will make it run better. It does run alot hotter than any of my other steppings though. And it's also my second MB
cdelatte.... I got a nice 170 CCBWE 0550 UPMW that is prime stable at 2.75Ghz w/ 1.44v. Interested?
Quote:
Originally Posted by cdelong
Check your pm's
How you like your memory? I have mine running those same timings with 2.7v.
Runs nice 1:1, I have lowered it down to 2.8v, but too lazy to update my sig.Quote:
Originally Posted by cdelatte
This thread is turning into a FS one.
Kind of like your sig????:stick:Quote:
Originally Posted by thunderstruck!
Sorry dude, but I can't acces the FS forum >100 post. I tried to make it as quiet as possible... Looks like someone read closelyQuote:
Originally Posted by thunderstruck!
My 165 0550 upmw is still running kinda warm.. just resat the heatsink.. applied a little to the heatsink, wiped off, and then only used a small pea sized amount on the cpu.Quote:
Originally Posted by cdelatte
Along with software, are these mobo temp probes a lot more accurate than previous ones.. like on my old p4 478? Maybe I should throw on my own temp probe.
my 165 run colder than my 148 @ same voltage :stick:
The odd thing is that the temps barely go up when priming. It goes from about 39-41 idle to 46 under full load with 1.26v. Maybe its the IHS.. but I probably won't remove it since I will resell it when I find a 170 that does 3ghz+
Got my Opteron 165 0550 UPMW 2 days ago. prime95 X 4 stable for 9hr+.:D
http://img233.imageshack.us/img233/5...ultv9hr8vd.jpg
Where did you get your chip from?Quote:
Originally Posted by ivo0613
I'm from Hong Kong. The chip is from a local computer shop.
4 instances? I've been doing 2.Quote:
Originally Posted by ivo0613
Is the standard 2 or 4? :confused:
oh... I learned that 2 instances for single core and 4 instances for dual core. Doing so could stress both CPU & memory at the same time.:)Quote:
Originally Posted by keichan82
That's the silliest thing I've ever seen. If you want to stress the CPU and mem, run a blend torture test. 1 instance/core is the standard. If you run 4x with dual-core, than each instance will only load 50%, doesn't help.
Quote:
Originally Posted by thunderstruck!
When i try to run 2 instances of blend it only picks up on 1 core (50%). Small or Large fft works correct, always 1 per core (100%) Any ideas on what i'm doin wrong? i have affinity set. one P95 is cpu 0 and the other is set for cpu 1.
Quote:
Originally Posted by situman
There shouldn't be anybody trying to OC above 300htt with anything other than a DFI lanparty. I haven't seen many motherboards that can even come close to the DFI. If those of u complaining about low OC's are not using a lanparty, maybe you should get one. They are absolutely the best OverClocking motherboards on the market today.
Really? I got 321htt with my Sapphire :) And who said I was complaining? My only complaint is my cpu couldn't max out this board since I haven't even touched the chipset and LTD volts yet.
unless you want accurate temperature readings... :(Quote:
Originally Posted by nugzo
Hmmm.. I might have a over-volting problem.. Right now I'm dual priming at ~2.1 with 1.20v. Isn't that kinda low?? I thought this was a more common problem with the expert.
I'll have to solder in some wires tomorrow so I can check the actual readings.
I have the same problem, tried to ask here and in DFI-street without reply...Quote:
Originally Posted by nugzo
I think this is a software issue, so i simply run first the small fft test, then the large fft---> ok this way get lot of time but at least i have 100% accuracy in stess tests
Note: i think i have found the nature of the problem with Prime Blend Test---> it seems that the Blend Test use a LARGE amount of memory (like he is running on both cores) when start: this way all the memory is on core0 and the second core simply don't have enough memory left for running the test.
This not happens with others tests, since the memory is equally balanced between the 2 cores by the software
Just popped the IHS off.. it wasn't so bad... but it didn't help. I placed a temp probe right next to the core and even mounted twice to test contact to the core. The software temps are pretty accurate. The probe confirms about 38-40* idle and about 49-52* under full load.. even with 1.2 vcore.
::vcore and vdimm are normal. Vcore in bios = 1.30v +104% and my multimeter reads 1.35 idle/1.37 load.
I'll take it up over here if anyone wants to reply..
http://www.xtremesystems.org/forums/...ad.php?t=83894
I heard that Asus A8N32-SLI deluxe is as good as Lanparty if not better.Quote:
Originally Posted by nugzo
Am I so lucky then? :eek:
I ran my Opty 146 prime stable @ 333×9 with 2GB OCZ gold at stock chipset voltage. :stick:
DFI SLi-DR btw... Chipset passive cooled by modded Zalman heatsink.
You didn't read it at XS certainly :stick:Quote:
Originally Posted by dickeywang
Hi guys,
I am new to this great forum~Hello!!:woot:
I also got an OP165, which is running @ 300*9 , default voltage on air now.
Idle is about 25-26C, while full-load is around 43-44C, which is a lot hotter than my previous OP146.:mad:
http://www.xtremesystems.org/forums/...1&d=1138635131
LanParty pwns... I was testing HTT's last night and the last HTT i took a validation of was 420 though I was stable up to 440, couldn't get it to boot at 450. :(
http://www.xtremesystems.org/forums/...1&d=1138636435
http://valid.x86-secret.com/show_oc.php?id=68124
My setup
LC Power 550 silent
Dfi Nf4 Ultra-d
Opty 165
Zalman 9500
2*512 Gskill 4800FF
http://img358.imageshack.us/img358/7...28620pd.th.jpg
http://img374.imageshack.us/img374/4...30512qo.th.jpg
Ciao :)
what in the hell have you done with your quicklaunch toolbar, rofl...
Nice clock :toast:Quote:
Originally Posted by Mo3bius
I am having some heat problems with my 170, may be time to flip the lid :)
http://i16.photobucket.com/albums/b2...ne/32M2860.jpg
I already flipped the lid of a 4400+ Toledo with little gain. The cpu was air cooled by a zalman 9500.Quote:
Originally Posted by alpha0ne
Congratulations for your cpu, it's really nice
ciao
That's my main rig's toolbar, it's full because I need all that stuff to run on it :D :DQuote:
Originally Posted by FragTek
This is also my daily use setting :)
ciao
Mo3bius what is the stepping for your 165?
CCBWE 0546MPMW - batch : xxxxxxxxx096
pcb : T
http://www.hostfiles.org/files/20060131115915_pcb.jpg
Ciao :)
Got my second 0550 UPMW on the way, should be here before this weekend.
Also some other fun toys to play with:
http://www.newegg.com/Product/Produc...82E16813999507
http://www.newegg.com/Product/Produc...82E16821104104
Anyways, how do you guys feel about this:
http://casemodgod.com/Reviews-story-2-78.html
First pic down- no harm no foul putting thermal tape directly onto the IHS?
tankguys has 165 CCBWE 0551 upmw and vpmw
/me flips coin
vpmw it is