Thx. :)Quote:
Originally Posted by mad_skills
It's a Chieftec BH-01B-B-SL.
Printable View
Thx. :)Quote:
Originally Posted by mad_skills
It's a Chieftec BH-01B-B-SL.
yes, i looked like some sort of a Chief. midi tower:)
Here is another picture:Quote:
Originally Posted by mad_skills
http://i223.photobucket.com/albums/d...6190001aw9.jpg
Chieftec cases are pretty nice, never seen that one before though, looks simple but classy I like it.
How is the quality build of chieftec cases, how does it compare to Silverstone and Lian Li?
Well you can't really compare a $200 case with a $70 case, but I have a chieftec and I couldn't be happier. For the money the case is excellent and does exactly what I need it to.Quote:
Originally Posted by Empty_Quarter
It's only a "modded" CS-601. ;)Quote:
Originally Posted by Fujimitsu
I think yes. :up:Quote:
Originally Posted by Empty_Quarter
Here's my brand new Antec Nine Hundred... Temps are at mid 30's with 120s on medium and 200 on high. My gfx temp dropped of 10°C by changing my case from my old Foxconn TLA570A with a 80 intake and a 92 at the back...
http://img.photobucket.com/albums/v2...3/DSC00161.jpg
http://img.photobucket.com/albums/v2...3/DSC00176.jpg
I got no pic of the inside without the window, didn't think about it :shrug:
that's some messed up cable management in an Nine Hundred...:D
Let's say I don't have modular PSU, nor the budget to buy one or to drill holes in my mobo plate... My case is brand new and my mom will never let me do holes in my case :DQuote:
Originally Posted by mad_skills
very neat and tidy, good work QS :up:
i like the exhaust green fan :)
THX. :)Quote:
Originally Posted by mad_skills
BTW: The green fan is a Nanoxia FX-08 1600. ;)
Happy about your Be Quiet??? mine died out on me 4 month after buying it....I'm now running an Enermax Infinty 720 and still waiting for the RMA on the Be Quiet (3 months and running:mad: )
Yes, my P5-520 watt run's now nearly 3 years without any problem's. :up:Quote:
Originally Posted by Olivier
Your fall is very badly, but did you not have the 24h support??
No not here and the resseller is a @$$§!!?hole!!!!Quote:
Originally Posted by deepsilver
you could take out one of the DVD drives and shove the wires into the drive bays.Quote:
Originally Posted by Mad1723
also you could move the fans up a slot and put the DVD in the second slot, shove wires under the bottom HDD bay and shove wires above the DVD drive.
also get some wire ties and tie down the wires away from the fans. also try to route any wires you can away from the middle of the case. and lastly you can buy a fan for the side mount but seeing where you keep your PC it may end up not working that great. also make sure your heatsinks and fans are clean
deepsilver, wich cpu cooler do u have?
is it Thermalright XP-120?
Right, it's my 3 year's old XP120 with a YateLoon D12Sl. :DQuote:
Originally Posted by pumpahhh
Quote:
Originally Posted by deepsilver
Good fans i've heard ^^
Cant find them anywhere here back in England though =[
Mine
A lot of air going through that cooler :D. Nice cabling too.Quote:
Originally Posted by iMMoRTaLiTY™
Behave!
Thanks.
very nice immortality
one question, how hot is your processor @ 3.97Ghz :O
i got my e6600 on 3.61Ghz with 1.56V
and its idle temp is around 37'c
I'm not running him at these clocks...
That's the MAX OC Clock.
I'm running him at 3.6GHZ atm... 1.45V
My temps are very high... 45C~ for every core.
The temps at 3.97GHZ was very high. 57C~ when he was idle.
Oooh, lovely thread. Here's my contribution.
Fatty in...
http://img.photobucket.com/albums/v2...anpartyp35.jpg
So those are pci slots...
http://img.photobucket.com/albums/v2...k/IMG_2186.jpg
3 SFLEX in the front w/ some raptor-taming moto tubes.
http://img.photobucket.com/albums/v2...k/IMG_2189.jpg
Awesome lighting. Clean computer too. :)Quote:
Originally Posted by Jodiuh
thats an amazing trick.. you switch on the ccfls and your HR-03 plus disappears :rofl: :ROTF: :clap:
it even shows the stock heatsink :eek:Quote:
Originally Posted by Ar3s
Lol:rotf:
its a different card you dope heads :ROTF:
My room's actually cooler running the gt...such a killer card. And I haven't lowered any settings from the move either. The framerate's a touch lower in World in Conflict, but that'll be taken care of soon. :D
should of gotten two 3870's for the p35 ;)Quote:
Originally Posted by Jodiuh
I will be so very, very sad if that indeed ends up faster in Crysis.
Installing an aftermarket Mosfet cooler do you use the thermal pad provided or use as5?
http://www.svc.com/hr-09u-2.html
My server::)
quite a few people have some damn nice servers on here; mines still a pII 350 :ROTF:
Lol:p:
rofl.
Nice server. :up:Quote:
Originally Posted by iMMoRTaLiTY™
Hey ..couple of pics of my case
http://mywebsite.bigpond.com/pyro1970/pyros/case4.jpg
http://mywebsite.bigpond.com/pyro1970/pyros/hdds.jpg
very nice cable management Pyro
indeed, very nice. but aint that hdd cage resonating like mad?
Thx :up:Quote:
Originally Posted by tiro_uspsss
Nope ..They are mounted on rubbers ;)Quote:
Originally Posted by Mad_Man
Pryo whats up with the warped video card?
damn...how come i can never get my case to look that nice.
nice cable management!
aren't the LED fans & the raptor louder than the noctua fans on the heatsink ?
Awesome Cable Management Dude!!!
One thing I came to love is cabling... Changes the look of any machine completely. Yours is just fabulous.
Well done!
Hi I have Curcial Balistix tracer ram and I am getting Overheat issues on my NB and memory so I am looking to get an aftermarket cooler of the ones below which one do you guys recommend? I just upgraded the case to an Antec 900 so I now have decent airflow and my MB temps at 24 idle and 28 load under benchmark or gaming.
Thermalright Passive Cooler:
http://www.svc.com/hr-07duol.html
Thermaltake Passive cooler:
http://www.newegg.com/Product/Produc...82E16835106098
OCZ Cooler:
http://www.newegg.com/Product/Produc...82E16835202003
Corsair Cooler:
http://www.newegg.com/Product/Produc...82E16835704001
Thanks Carter.
Antec Spot Fan...that Corsair cooler rattled my case and pushed less air on high than the Spot on low. Corsair fan's quite a bit louder @ high too.
CoolIT ram cooler
http://www.newegg.com/Product/Produc...82E16835227004
Seems kind of big doesn't it not alot of room in an antec 900 for fluff.Quote:
Originally Posted by Ar3s
Cant you just get heatsinks for the RAM like the HR-07 shown above? if you have enuf airflow you should be fine with them passive
RIGHT GUYS
I've gone from my Lian Li PC-60 to an Antec 900
Why? because I got the case for free. :)
and thus im going to use this while I plan to mod out my PC-60 Plus
more on that later..
anyway, here are a few pictureees
http://i80.photobucket.com/albums/j1...7/DSC02118.jpg
http://i80.photobucket.com/albums/j1...7/DSC02116.jpg
http://i80.photobucket.com/albums/j1...7/DSC02109.jpg
http://i80.photobucket.com/albums/j1...7/DSC02108.jpg
http://i80.photobucket.com/albums/j1...7/DSC02111.jpg
http://i80.photobucket.com/albums/j1...7/DSC02121.jpg
Looks very nice ;)
I especially like the blue color on the Zalman.
is that antec case any good?
*drool* :D
http://www.abload.de/img/123123123c8c.jpg
Yeahh Tommy Build your TR City :D:D:D:D
Very sexy Tommy. :up:
From your experience is HR-01 Plus more effective than TRUE?
Considering of getting an HR-03 R600 for my red furnace, had it in my hand the other day but didn't score cause of no good 92mm fans at the store, HR-11 coming first :D
Behave!
ey Tommy, here's an addition to your city - http://www.thermalright.com/a_page/m...ct_ifx-10..htm
When will it be out?
did you polish them.. man they shine..... mine are oxidied...
With slower fans i have better results ;)Quote:
Originally Posted by VoGonPT
I have a HR-10 here, but I cant use it because it wont fit with my case :(Quote:
Originally Posted by emoners
No :p:Quote:
Originally Posted by Ar3s
Very Nice Case :up:Quote:
Originally Posted by HaGGaRd
its not much but here are some of the things I modify using a standard fan
http://www.geocities.com/christopher...a/IMG_0341.jpg
http://www.geocities.com/christopher...a/IMG_0343.jpg
http://www.geocities.com/christopher...lviola/pc.jpeg
oh it's already available? can't find it on the egg.:( thought it would fit on the lian-li considering that's way they used as an example.Quote:
Originally Posted by Tommy_Hewitt
by the way, we have a similar setup...except i'm using the HR-07 (& not the Duo version)...even in a Lian-Li case
http://i116.photobucket.com/albums/o...n_Rhames16.jpg
http://i116.photobucket.com/albums/o...n_Rhames17.jpg
No, it isnt available yet. But my brother uses an IFX-14, but cant mount the HR-10 in his PC7 and so we have an useless HR-10 here :yepp:Quote:
Originally Posted by emoners
And your rig is as beatyful as mine :D......but i dont like the white fans :(
Well i just finished installing a 5 HHD Bay Cage into My Lian Li PC-7B+ and also modded the side to show off my raptor X :P
http://www.users.on.net/~isaac.miller/case/100_0886.JPG
http://www.users.on.net/~isaac.miller/case/100_0887.JPG
http://www.users.on.net/~isaac.miller/case/100_0888.JPG
Thankyou :up: :DQuote:
Originally Posted by mad_skills
Thanks :DQuote:
Originally Posted by mcaff
Yes the case is very nice, the build quality is great. Has dropped all my temperatures for each component a good 10'c.Quote:
Originally Posted by pie_uk
Very pleased with it =)
Quote:
Originally Posted by ayet
lmao, dude, are those fans ontop of a CRT? what fans are they?
deepsilver, don't you keep re-posting the same pics? or am i seeing things?
No, the pics were made before 15 minutes. ;)Quote:
Originally Posted by Origin_Unknown
I have nothing to do atm, that's why I made them. :D
Quote:
Originally Posted by deepsilver
lol, i've got a new cam and keep meaning to upload my new pic's but cba :D
... wtf are your cat's nails painted?
also, have you overclocked the cat?
Yes look at his nails...are really hot :D need to cool better your cat :up:Quote:
Originally Posted by Origin_Unknown
Rubber Caps Keep the Furniture Happy..Quote:
Originally Posted by Origin_Unknown
ah :DQuote:
Originally Posted by Brian MP5T
LOL that's an idea..
*finds my 2 cats..*
My mom's new pc. :up:
http://i223.photobucket.com/albums/d...r/PC-Mom_1.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_2.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_3.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_4.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_5.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_6.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_7.jpg
http://i223.photobucket.com/albums/d...r/PC-Mom_8.jpg
is that a 915 stock intel board?
No, it is a Intel D865GSA. ;)
http://i223.photobucket.com/albums/d...er/D865GSA.jpg
ah, i've not seen those chipset heatsinks for a while now ;)
LAWL, first year uni, hah first der. test : PQuote:
Originally Posted by Brian MP5T
AP ftw.
is that X-Fi logo blue?
It's a LED..Quote:
Originally Posted by emoners
X-FI BLUE
Fatality RED
which X-Fi is that? obviously not XM, cause thats what i have & it dont have no pretty lil LED :p: :up:Quote:
Originally Posted by Brian MP5T
oh...its the X-Fi Elite Pro (on his sig).Quote:
Originally Posted by Brian MP5T
was just curious since my X-Fi Fatal1ty turns red.:)
It's the upper range one, I cant remember the name, however it has a separate FDD molex for added power like a PCI video card and I believe that I read in a report that it has the same power load and computing power as a Pentium D... LOL...Quote:
Originally Posted by tiro_uspsss
:confused: my screen shows me his sig - & all it says is "Creative X-Fi" - nothing to do about which model it is...Quote:
Originally Posted by emoners
edit: ohhh u mean *his* sig LOL nvm, gotcha hehe - my bad sorry!
they should do that with the video cardsQuote:
Originally Posted by tiro_uspsss
hmm i smell a LED project
hey r those north and south bridge thermaltake coolers loud?
not at all - nice'n'quiet :up:Quote:
Originally Posted by tbone8ty