Opteron 170 CBBWE 0550UPMW

Quote:

---

Originally Posted by alpha0ne

Same ram but different motherboard but it should give you some idea :)

System -- alpha0ne

Opteron 170 CCBWE 0546XPMW
10x280 2.8ghz @ 1.488Vcore / 1.51v Shown in Bios
DFI NF4 eXpert Bios NF4EDC07 / X850XT
2x1GB Gskill 4000 HZ 1:1 @ 280MHz 1T 2.67Vdimm / 2.71v Shown in Bios
2xHitachi 7K80 SATA II Raid 0 + 1xWD1600JB + 1xWD800JD
Memory Bandwidth (memtest 1.65) @ 280MHz = 2881MB/s

OS--- XP Pr0 SP2

VID= 1.475
VID SPECIAL= 102.4%
CHIPSET= 1.50v
LDT= 1.2v
LDT= 3

CPC = Enabled
CAS Latency(CL) = 3
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 3
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3684
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = Auto
Skew Value = 0
DRAM Drive Strength = 7
DRAM Data Drive Strength = 1
DDRAM Response Time= Fast
Max Async Latency = 8
Read Preamble Time = 6
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16
Bypass Max = 4
32 byte Granularity = Disabled

---

I will give it a try...thank you!

I have the same chip! I have to wait for the mobo until tomorrow, though :(. Azerty.nl has them in stock, now!

Quote:

---

Originally Posted by Vegitto

I have the same chip! I have to wait for the mobo until tomorrow, though :(. Azerty.nl has them in stock, now!

---

got new chip currently @ 1.408V 280x10....temps seem a lil bit higher than 0546XPMW

Some initial testing on my 170 0550UPMW.. :woot:
http://img128.imageshack.us/img128/3...tled1ow.th.png

She was 32m stable at 2650mhz with stock vcore then I just upped the vcore to 1.42v for now.

bump ;)

mine is good clocking chip 3d stable and all that just wont beciome prime stable
I can to 2.8 1.41 volts all 3d stable and all just craps on prims instantly, I think its something with this dam Expert or my ram, it will game and 3dmark all day @ 2800 with 1.41, its the wierdest thing man, im sick of it and am about to sell it..
I can even game at 2880 and super pi just prime craps on me instantly no matter what im at

Quote:

---

Originally Posted by Philosophy

mine is good clocking chip 3d stable and all that just wont beciome prime stable
I can to 2.8 1.41 volts all 3d stable and all just craps on prims instantly, I think its something with this dam Expert or my ram, it will game and 3dmark all day @ 2800 with 1.41, its the wierdest thing man, im sick of it and am about to sell it..
I can even game at 2880 and super pi just prime craps on me instantly no matter what im at

---

try it on the older mobo if it's fine then you know the expert or ram is to blame. and if you seriously thinking about selling it please let me know as my colleague is looking for a 170 UPMW and he might get it off of your hand.

Quote:

---

Originally Posted by ben805

try it on the older mobo if it's fine then you know the expert or ram is to blame. and if you seriously thinking about selling it please let me know as my colleague is looking for a 170 UPMW and he might get it off of your hand.

---

I have it in the for sale thread as we speak, im gonna edit that post ans say pending until I can further test it out and see where I can get with it..

you are the pending ben :toast:

Quote:

---

Originally Posted by Philosophy

I have it in the for sale thread as we speak, im gonna edit that post ans say pending until I can further test it out and see where I can get with it..

you are the pending ben :toast:

---

I've got few of my colleagues to jump on the dual core boat and they are very happy with theirs except the last one is almost convinced as he said if he can get one with my stepping he would consider it, please check your pm and thanks for putting it on pending ;)

i hear 0550 upmw dont have cold bug, is this why he wants it?

I don't mean to thread steal, but I got a 175 with the same stepping just now.. sitting on the welcome mat with the news paper on it... OEM from the egg..

http://venus.walagata.com/thumbs/agunn_My175.JPG

needless to say I am hoping for some good OCing numbers out of it.. whew.

EDIT: the default vcore on this chip is 1.29v... wow..

Ïðèâåòñòâóþ âñåõ ó÷àñòíèêîâ ôîðóìà!
ß óæå 5 äíåé ÷èòàþ ýòîò ôîðóì, è âîò ðåøèëà çàðåãèñòðèðîâàòüñÿ...
Òàêæå õîòåëà áû îòìåòèòü, ÷òî äîìåí www.over-clock.co.uk î÷åíü ïîäõîäèò äëÿ ôîðóìà