Printable View
no RAM-disc
XBrytanX - 7:20:047 - 39x102.63 - 1435.7 MHz - 9-12-12-17-110-1T - Asrock -OCF - Gskill 2600 C10 - 2x4gb - 2.163v - h2o/LN2-40
http://imageshack.us/a/img838/5299/tfyx.png
XBrytanX - 5:58:469 - 49x102.6 - 1430.5 MHz - 9-12-12-17-108-1T - Asrock -OCF - Gskill 2600 C10 - 2x4gb - 2.150v - h2o/LN2-50
http://imageshack.us/a/img838/6279/3g0o.png
Test on 24\7 untweaked OS
Fosco - 7:42:760 - 40x100 - 1200.1MHz - 8-11-7-36-88-1 - Gigabyte Z87X-OC - GSkill 2000MHZ Flare 2x2GB/PCS - 1.785v - water/air
http://s24.postimg.org/5g7orci0l/spichallenge2.jpg
windows print screen
Splave - 7:22:250 - 31x129 - 1549MHz - 12-14-13-17-266-2 - ASRock MOCF - ADATA 2800 4x4gb - 1.75v - Air/Air
http://i.imgur.com/7N6GYOG.jpg
Hynix ballin XD
Imgur works very well for image hosting and is completely free:up:Quote:
Originally Posted by hicookie
Gave the 152 bios a spin...... wow
C-N- 5:57:938 - 49x102 - 1430MHz 9-12-12-17-108-1 - Asrock Z87 OCF/AC - Corsair 2666 C10 2x4GB/Samsung HCH9 - 2.0135v - CPU Water Kuhler 920 / Ram Air
http://i106.photobucket.com/albums/m...8605M57938.png
Nice run cn!
This version is better than the earlier beta?Quote:
Gave the 152 bios a spin...... wow
C-N- 5:57:938 - 49x102 - 1430MHz 9-12-12-17-108-1 - Asrock Z87 OCF/AC - Corsair 2666 C10 2x4GB/Samsung HCH9 - 2.0135v - CPU Water Kuhler 920 / Ram Air
Quote:
Originally Posted by maxxx
That one i have put the RTL tight samsung profile inside , easier for u guys to bench .
Will add tight Hynix CFR MFR BFR later .... kind of busy for lots new bugs now ~_~
Thanks Nic. Will give this a try....Quote:
Originally Posted by nickshih
Quote:
Originally Posted by C-N
Nice run
My HCH9 don't run so well.
Some voltage tips?
Thanks :up:Quote:
Originally Posted by THERULE
Mine will run a decent 32M time @ 2860 with the board on auto voltages only need to set vdimm that's it!! after that a little trial & error tweaking (for me lowering voltages) & bam she's golden
I am away from my rig atm but if you want my actual voltages PM me & I'll reply when I get back.
TaPaKaH 7:22.594 - 40x100 - 1400 / 9-12-12-18 - M6G 0037 - Team Samsung 2.06V - all air
RTLs at 48/48 11/11, lower won't POST
http://abload.de/img/722594a0mzhr.png
set all RTLs AUTO... boot 2660 ( 95 bclk) rtl will be set 43/42 and set manually 4/4
set bclk recovery ignore then boot into windows set 97.5 reboot don't go to bios boot into OS again and set 100 your RTL will be 43/42 4/4
or play with Initial RTL
yeap,set initial rtl to 48 or 47,leave auto rtl and delay and most of the times you will have 42/43 4/4 or 42/44 5/4 :)
Quote:
Originally Posted by THERULE
speak to tapakah about samsung voltage tips
2.4v XD
Thanks for advice, hiwa :up:Quote:
Originally Posted by hiwa
Booting 95.0 sets RTLs to 41/42 which are too tight, but 96.2 is 43/44 which gains nearly a second in 32M.
http://abload.de/img/721703saajz7.png
With different CW technique managed to get this:
TaPaKaH 7:21.328 - 40x100 - 1400 / 9-12-12-18 - M6G 0037 - Team Samsung 2.06V - all air
http://abload.de/img/721328tojuw.png
Nice one with Sams sam :D
Also try set 47 initial rtl for 2800 (48 for 2870s) with bit2 enabled. It may helps rope in some rtlsQuote:
Originally Posted by TaPaKaH
Dre I'm coming for you XD
l0ud_sil3nc3 - 5:55:969 - 50x100.1 - 1334.2 MHz - 6-10-6-24-64-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.15v - LN2 @ all
http://i.imgur.com/pk2tbZx.png
http://youtu.be/8C7xdaIg0tc
Dang! Awesome run l0ud:up:
55 land...just awesome!
Awesome loud,crazy run :up:
^thanks guys, ended up running out of juice, only used 10L for the 4/5Ghz 32m runs probably the most efficient I have ever been with LN2 usage:p:
Should have another 230L here Friday:D