Interesting... out of stock again already and Amazon has jacked up the 1 they have left in stock to 80 bucks. Last week when they were out of stock Amazon had them for 90+. But when newegg had them in stock the other day they were 48. So lame. Glad I ordered mine when I did.
Quote:
Originally Posted by BeepBeep2
I tried all types of voltages and recommend cas timing settings and I couldn't boot my at 5ghz with my 2500k so I am just about certain I'm going to take back to store and keep the Gskills.
Had some time to play so I broke out the Sammy again.
This time I found a sweet spot for 1870mhz 1T-9-9-9-27 1.56v with 2500k@5ghz.
http://minidriven.com/BlacknBlueforIB/sammy5ghz1866.jpg
http://valid.canardpc.com/show_oc.php?id=2299107
I'm thinking about keeping them again. :D
I might get add a 2x2GB set of Sammy's for a total of 12GB and use the 2x2GB kit for crazy OC benches.
Next test is 5GHZ with the ram at 2133mhz.
doublepost
So far so good. Still playing around with them but right now cruising at 1866 9-9-9-27 1T with 1.56v. I was also able to move to slots A1 and B1 thanks to the low-profile. :up:
Memtest stable so far and gonna run it for a week as is then see if I can get em to go higher. Already very pleased with these.
My local micro center got YKO 1205 batch which some peep took it to DDR3 2933 Cas 11 on Asus M5G:D
Will try a few pairs of these:up:
http://img856.imageshack.us/img856/8...enshot077h.jpg
YKO 1209 over here to test:D
Currently running 16GB with loose timings of 11-11-11-28 2T @ 1.5V (not even sure if it needs 1.5, I just set it and forgot it). I found that my processor won't go higher than 5.1GHz (sad panda) so at some point in time I will need to focus on ram timings.
My kit is the same.Quote:
Originally Posted by l0ud_sil3nc3
Reduced voltage to 1.5v and still seems to be stable at 1866 9-9-9-27
DDR3 2654 @ 1.67V benching freq:)
glad i kept 2 kits of 8 of this mem ;)Quote:
Originally Posted by Dumo
ivy?Quote:
Originally Posted by Dumo
sb-e?
regardless great job:up:
Currently at 1866 9-9-9-27 with only 1.35v now. 2133 is looking like a possibility with added voltage. Still making sure this is stable. Memtest ok so far. Hyper pi 32m ok so far. Now for some BF3 which will typically crash if my system is not stable.
Attachment 124792
i have the same mem you can do 2133 10-10-10-28 1T easy at 1.55 :) test it you'll seeQuote:
Originally Posted by GripS
So far so good. :up:Attachment 124804Quote:
Originally Posted by andressergio
New Toy has arrived from the US !
Ready for AMD Bulldozer Memory OC Action :)
http://www.abload.de/thumb/img_4368k230j.jpg
http://www.abload.de/thumb/img_43885x29l.jpg
I'm super glad to hear that you guys are loving this stuff. I'm pretty impressed by what you guys have managed to pull off.
told ya ;)Quote:
Originally Posted by GripS
here one of my kits run solid as a rock, i had a nighmare trying to run the ballistix ellite at 2133 CL9 this is lovely like my patriots easy as a pie
http://img834.imageshack.us/img834/4989/sammy1u.jpg
Uploaded with ImageShack.us
ok i luv them now 2133 9-10-10-28 1T @ 1.5 !
http://img706.imageshack.us/img706/9867/sammy2.jpg
Uploaded with ImageShack.us
Very good results.Quote:
Originally Posted by andressergio
What ram slots are you using with those sticks?, red or black?
So Samsung 1 - Crucial 0 for you?
Quote:
Originally Posted by andressergio
Red ones but see this im on a new chip thats amazing on te other was impossible so I think it's IMC relatedQuote:
Originally Posted by NEOAethyr
Hey punisher as I told NEO I got much better results on this chip and crucials run fine but very sensible to volts not easy, so this Samsung the patriots and mushkin are solidQuote:
Originally Posted by Punisher!
Dumo ur flying there gratsQuote:
Originally Posted by Dumo