[un]official GTX580 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

12-14-2011, 05:21 AM
CryptiK

No idea about that. Someone will know!
12-14-2011, 06:08 AM
andressergio

Quote:

Originally Posted by gpvecchi

Thanks! As I'll have one free moment, I'll test it at 1.21... Any info about OVP disabled in DCII?

u can do that with GPUZ but i didnt try it, at least its what i read, with OCP for ex
12-14-2011, 07:27 AM
andressergio

some screens using all the power on my GTX580 SLI @ 900/4400, BF3 maxed out using 75% each card

http://img841.imageshack.us/img841/1...3214611959.jpg

http://img41.imageshack.us/img41/696...3220750883.jpg

http://img703.imageshack.us/img703/7...3221055798.jpg

http://img338.imageshack.us/img338/6...4011701133.jpg

http://img825.imageshack.us/img825/1...3124032757.jpg

http://img16.imageshack.us/img16/160...3123522333.jpg

http://img576.imageshack.us/img576/7...4002758443.jpg

Uploaded with ImageShack.us
12-14-2011, 01:04 PM
gpvecchi

Quote:

Originally Posted by andressergio

u can do that with GPUZ but i didnt try it, at least its what i read, with OCP for ex

Well, I meant that overclockersclub.com review says that "the (580) DirectCU II does not have the hardware and software current limitations imposed on the reference design", but a "series of fuses used as a means to fully protect the core from over current situations"...
12-15-2011, 02:40 AM
CryptiK

When does OVP/OCP kick in on a reference card? Anyone running hard modded at 1.2-1.3v for awhile and could comment?
12-15-2011, 09:36 AM
Sauron_Vie

i tested my cuII for a bench running @ 1,29v cooled with water and temp was not over 45° ;) . card is still alive and had no problems @all, but for 24/7 i would not recommend this voltage, but btw i saw that ekwb had a full cover for this card :rolleyes:
12-15-2011, 10:05 AM
emertX

Here two of my three GTX580's
http://hwbot.org/submission/2227994_
1110MHz under water!!!
The third can do that too, but my PSU (Enermax MaxRvo 1500) is too shabby for that. Need immediately one more PSU!
12-15-2011, 03:29 PM
-R8-

asua GTX580 DirectCU II @ 1GHz \2400 memory\1.188v .

http://img43.imageshack.us/img43/4000/8550q.jpg

http://img43.imageshack.us/img43/4000/8550q.jpg
12-15-2011, 07:51 PM
andressergio

congrats on the results guys amazing cards

do you think that puting mines with full cover blocks will improve OC ? currently they do max 981/4600 at 1,175 more will crash on 3DM11 but on 3DM06 i can go 991 on air reference EVGA GTX580's vid 1.0

cheers !
Sergio
12-16-2011, 02:17 AM
CryptiK

I have flashed my BIOS with overclocked speeds and altered the max allowable voltage which both work fine, however I'm having trouble flashing a specific voltage to my card. If I change the P15 state (field 1) voltage to a value other than stock when I boot into windows it will just reflect the stock VID, but if I also change field 0 to the same voltage it will again detect only stock VID on boot but when I hit 'reset' in MSI afterburner, it sets the voltage that I set in BIOS + 0.0125v, so for example I set 1.1505 for fields 1 and 2 and flash, then in windows it detects as 1.088v (stock) under load, then I hit 'reset' in MSI AB and it sets to 1.163v.

Anyone know how to flash a specific P15 state voltage to the card so it detects it on boot switches to it in 3D without the use of any OC software?

EDIT- DW I figured it out.

920c|1840s|2300m @ 1.11v load (DMM) done through BIOS. Might go a bit higher but I was figuring out the BIOS modding part of it first.

http://i720.photobucket.com/albums/w...11vBIOSmod.png
12-16-2011, 05:53 AM
andressergio

Quote:

Originally Posted by -R8-

asua GTX580 DirectCU II @ 1GHz \2400 memory\1.188v .

http://img43.imageshack.us/img43/4000/8550q.jpg

http://img43.imageshack.us/img43/4000/8550q.jpg

it that on water ?
12-16-2011, 05:55 AM
andressergio

Quote:

Originally Posted by CryptiK

I have flashed my BIOS with overclocked speeds and altered the max allowable voltage which both work fine, however I'm having trouble flashing a specific voltage to my card. If I change the P15 state (field 1) voltage to a value other than stock when I boot into windows it will just reflect the stock VID, but if I also change field 0 to the same voltage it will again detect only stock VID on boot but when I hit 'reset' in MSI afterburner, it sets the voltage that I set in BIOS + 0.0125v, so for example I set 1.1505 for fields 1 and 2 and flash, then in windows it detects as 1.088v (stock) under load, then I hit 'reset' in MSI AB and it sets to 1.163v.

Anyone know how to flash a specific P15 state voltage to the card so it detects it on boot switches to it in 3D without the use of any OC software?

EDIT- DW I figured it out.

920c|1840s|2300m @ 1.11v load (DMM) done through BIOS. Might go a bit higher but I was figuring out the BIOS modding part of it first.

http://i720.photobucket.com/albums/w...11vBIOSmod.png

grats mate i knew you can do it
12-16-2011, 06:31 AM
CryptiK

Thanks mate. Much cleaner solution that using overclocking software and setting voltage etc. I just like BIOS taking care of it all and it does very nicely.
12-16-2011, 09:45 AM
-R8-

Quote:

Originally Posted by andressergio

it that on water ?

:yepp:
H100 Mode .
12-16-2011, 01:11 PM
andressergio

Quote:

Originally Posted by -R8-

:yepp:
H100 Mode .

Jaja yeah I forgot very nice man
12-17-2011, 10:49 AM
gpvecchi

Well, thanks, I reached 1Ghz with my DC II with 1,213 (I didn't effort any more); as I'm on air, is it better to manually raise fan speed, or auto is enough? GPU don't go over 65° with auto, but VRMs heatsink and backplate are a little hot. But fan at 100% is sooooo annoying...
12-17-2011, 01:43 PM
andressergio

Quote:

Originally Posted by gpvecchi

Well, thanks, I reached 1Ghz with my DC II with 1,213 (I didn't effort any more); as I'm on air, is it better to manually raise fan speed, or auto is enough? GPU don't go over 65° with auto, but VRMs heatsink and backplate are a little hot. But fan at 100% is sooooo annoying...

wow seems like directu are nice cards but im wondering if its safe to play hours of BF3 every day my opinion is NO unless on water

i dont use AUTO fan as it heats more tune it manual

cheers
Sergio
12-18-2011, 08:51 PM
andressergio

Are all direct cu ii so good ?
12-18-2011, 09:21 PM
CryptiK

Short answer no. On air/water they are about as good as any reference card and your chances of getting a gem are no better or worse from what ive seen. They perform better than most on subzero as the beefed up VRM comes into play.
12-19-2011, 02:17 AM
CryptiK

Quote:

Originally Posted by emertX

Here two of my three GTX580's
http://hwbot.org/submission/2227994_
1110MHz under water!!!
The third can do that too, but my PSU (Enermax MaxRvo 1500) is too shabby for that. Need immediately one more PSU!

Just saw this, impressive speeds, what voltage?
12-19-2011, 05:12 AM
andressergio

Quote:

Originally Posted by CryptiK

Just saw this, impressive speeds, what voltage?

i told you they are very good cards :)
12-19-2011, 11:51 AM
gpvecchi

Quote:

Originally Posted by CryptiK

Short answer no. On air/water they are about as good as any reference card and your chances of getting a gem are no better or worse from what ive seen. They perform better than most on subzero as the beefed up VRM comes into play.

:yepp:What he said... Just better cooled and perhaps better "feeded"...
12-19-2011, 11:09 PM
CryptiK

Quote:

Originally Posted by andressergio

i told you they are very good cards :)

What cards? emertx's cards are reference design.
12-20-2011, 02:01 PM
orson

Having some issues with my 3dmark11 bench, looking at other people's on hwbot they are scoring considerably higher for a similar spec'd system.

for example

this guy is scoring 22111 with a considerably lower overclock than mine, what i did notice though was his pixel fillrate was considerably higher than mine.

any input would be most appreciated

http://hwbot.org/image/690319.jpg

here is my system

http://www.outlaw-star.net/sandye/sandy_bridge_E.jpg
12-20-2011, 04:05 PM
andressergio

Quote:

Originally Posted by orson

Having some issues with my 3dmark11 bench, looking at other people's on hwbot they are scoring considerably higher for a similar spec'd system.

for example

this guy is scoring 22111 with a considerably lower overclock than mine, what i did notice though was his pixel fillrate was considerably higher than mine.

any input would be most appreciated

http://hwbot.org/image/690319.jpg

here is my system

http://www.outlaw-star.net/sandye/sandy_bridge_E.jpg

i dont know what can be wrong but keep in mind that FIRS version of 3DM11 scores more than last versions

cheers
Sergio

Show 100 post(s) from this thread on one page