G.SKILL F2-9600CL5D-4GBPI Sample testing

Printable View

Show 100 post(s) from this thread on one page

08-20-2009, 03:11 PM
OC Nub

Trying 8gb of the pi's in w7 64.
http://img38.imageshack.us/img38/1976/8gb.png
08-20-2009, 05:40 PM
zsamz_

Quote:

Originally Posted by OC Nub

Trying 8gb of the pi's in w7 64.

nub how stable is is runnin 8 gigs?
08-20-2009, 06:02 PM
OC Nub

zsamz: I failed blend after 8 loops of 1024, I just installed the other 2 stix and booted at the same voltages-2.16vdimm-1.46vmch that I was using before. Will need to increase mch and maybe vdimm to get stable.
08-20-2009, 11:41 PM
zsamz_

Quote:

Originally Posted by OC Nub

zsamz: I failed blend after 8 loops of 1024, I just installed the other 2 stix and booted at the same voltages-2.16vdimm-1.46vmch that I was using before. Will need to increase mch and maybe vdimm to get stable.

you must know how much i hate gigabut lol
i almost bought a ud3p but i rather sell my q9650 :rofl:
stickin to my guns
with my gigabut luck if i bought one it would me DOA :rofl: or die in days
08-21-2009, 03:03 AM
radaja

whats the vid on your Q9650?and how much are you selling it for?
08-21-2009, 03:19 AM
zsamz_

Quote:

Originally Posted by radaja

whats the vid on your Q9650?and how much are you selling it for?

i guessin you know i not gonna buy a gigabut lol
its not a cherry but its doin 4.275 with 1.4v 4.0 with 1.35 i'm on air so ....
i didnt try it with my dfi dk p45
but i'm open to offers you can pm me lol
but i much rather sell it local shippin to the states is a killer
shippin from the us is much cheaper
08-21-2009, 03:40 AM
radaja

yea i hear you about the shipping.plus i wouldnt really be
interested unless it was a great vid like 1.15-1.18v.cause
im trying to sell my LGA775 gear and getting the i7 stuff
but if it was a low vid chip then id be willing to keep my
UD3R and get it,and then clock the hell out of it:D
08-21-2009, 04:23 AM
zsamz_

Quote:

Originally Posted by radaja

yea i hear you about the shipping.plus i wouldnt really be
interested unless it was a great vid like 1.15-1.18v.cause
im trying to sell my LGA775 gear and getting the i7 stuff
but if it was a low vid chip then id be willing to keep my
UD3R and get it,and then clock the hell out of it:D

i much prefer my e8600 @ 4.6
i dont render so a quad is totaly useless to me lol
your e8400 is a nice chip you should be able to better than me lol
08-21-2009, 09:09 AM
18 is # 1

Quote:

Originally Posted by OC Nub

zsamz: I failed blend after 8 loops of 1024, I just installed the other 2 stix and booted at the same voltages-2.16vdimm-1.46vmch that I was using before. Will need to increase mch and maybe vdimm to get stable.

GSkill has told people not to run two sets of 9600 Pi...at least not to expect stability if they do.
08-21-2009, 12:40 PM
OC Nub

Just due to stability or can damage occur?
08-21-2009, 02:04 PM
zsamz_

Quote:

Originally Posted by OC Nub

Just due to stability or can damage occur?

not all boards can do 4 stix @ 1200 thats why
08-21-2009, 05:24 PM
18 is # 1

Quote:

Originally Posted by OC Nub

Just due to stability or can damage occur?

Stability only.
08-21-2009, 05:37 PM
tool_462

Quote:

Originally Posted by zsamz_

not all boards can do 4 stix @ 1200 thats why

The UD3P probably can :p:
10-02-2009, 04:16 AM
tootall

I'm joining the club. Just bought off of the egg for $149.99. OCZ Blades do not currently seem to be available anywhere. I am working on clocking my ut p35-t2r e8400 and zsamz seemed to have pretty good results with a similar C2D combo. My Dominators are just not happy much over stock 1066 5-5-5-15 pl6. Still pricey but it appears still some of the best 2x2G ddr2 available.
10-02-2009, 08:58 PM
zsamz_

Quote:

Originally Posted by tootall

I'm joining the club. Just bought off of the egg for $149.99. OCZ Blades do not currently seem to be available anywhere. I am working on clocking my ut p35-t2r e8400 and zsamz seemed to have pretty good results with a similar C2D combo. My Dominators are just not happy much over stock 1066 5-5-5-15 pl6. Still pricey but it appears still some of the best 2x2G ddr2 available.

the limit on ut-p35 was 1340
go 500fsb+ 333/800 divider n u be happy
10-05-2009, 12:13 PM
tootall

Quote:

Originally Posted by zsamz_

the limit on ut-p35 was 1340
go 500fsb+ 333/800 divider n u be happy

Just got them and powered them up @
460fsb 266/667 for 1150MHz 5-5-5-15 fast fast PL6
three ticks on the voltages
I am going to push 266/667 and then compare to 333/800
SG showing .09 VDIMM difference, 2.1 set vs. 2.01 showed
Does any other program show VDIMM voltage?
I don't even see it in Everest and I'd like a comparison against SG
this memory does indeed rock!
10-05-2009, 02:12 PM
zsamz_

Quote:

Originally Posted by tootall

Just got them and powered them up @
460fsb 266/667 for 1150MHz 5-5-5-15 fast fast PL6
three ticks on the voltages
I am going to push 266/667 and then compare to 333/800
SG showing .09 VDIMM difference, 2.1 set vs. 2.01 showed
Does any other program show VDIMM voltage?
I don't even see it in Everest and I'd like a comparison against SG
this memory does indeed rock!

use everest
go 500 fsb+ 333/800
n dont be scared to pump 2.2 to get to 1300;)
10-16-2009, 05:40 AM
tootall

Quote:

Originally Posted by zsamz_

use everest
go 500 fsb+ 333/800
n dont be scared to pump 2.2 to get to 1300;)

Found the memory voltage in everest, thanks. Not sure if my older version was not showing it or if I forgot how to use a scroll bar, lol. 450 5:4 1125 is very stable with minimal voltage increases using pl6 5-5-5-15-48. Starting to play with the 6:5 divider to see what that gives me. I can hit 1300MHz benching but don't like to keep the voltages cranked that high for very long.
10-16-2009, 07:53 AM
zsamz_

Quote:

Originally Posted by tootall

Found the memory voltage in everest, thanks. Not sure if my older version was not showing it or if I forgot how to use a scroll bar, lol. 450 5:4 1125 is very stable with minimal voltage increases using pl6 5-5-5-15-48. Starting to play with the 6:5 divider to see what that gives me. I can hit 1300MHz benching but don't like to keep the voltages cranked that high for very long.

dont be scared:rofl:
the ut p35 can handle it
so can the pi some use 2.3+ daily
10-16-2009, 08:10 AM
LiquidReactor

Hey, does anyone here have a spare kit they wouldn't mind selling? Looking for a good clocking one, 1300Mhz+ etc. Gladly pay a good amount as long as the sticks are proven oc'ers.
10-16-2009, 10:10 AM
BeepBeep2

How much voltage are you giving your Reapers? (If I might ask)
10-16-2009, 10:15 AM
LiquidReactor

Quote:

Originally Posted by BeepBeep2

How much voltage are you giving your Reapers? (If I might ask)

2.2V for 1150ish when I use 2.40B. 2.26V for 1195-1200.
10-26-2009, 05:59 AM
GunGod

Did someone buy recently this kit (newegg or different seller)) and is it still use same IC's that do 1300+ ?

Edit:
wow not reply more that 10 days in this thread for this popular kit :(
11-06-2009, 11:15 AM
tootall

Quote:

Originally Posted by GunGod

Did someone buy recently this kit (newegg or different seller)) and is it still use same IC's that do 1300+ ?

Edit:
wow not reply more that 10 days in this thread for this popular kit :(

I got mine from the egg recently. Do not know about the chips as I am not removing the spreaders. I got to around 1300 at 2.2V but did not test for actual stability. Running at 1125 and they show less than 2.1V under load and completely stable.
11-17-2009, 11:22 PM
izallica

I have this kit & run fine in amd 1200 at 1.90v, 2700cpu/nb. PII 965be @3.8ghz.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 10:21 PM.

XtremeSystems