The E6300 data is lacking in the table. So i thought id just ask, how good are L627A chips at overclocking?
Thx
Printable View
The E6300 data is lacking in the table. So i thought id just ask, how good are L627A chips at overclocking?
Thx
i dont think he update this anymore ... he should like let couple people access the 1st post so that it gets update constantly
I have an l627a in my comp right now, runs 3.65 stable with 1.55 volts though. But i still don't hit over 67 in temp which is fine with me. I think it might even go higher if i could just get more voltage to the north bridge, but my ds3 doesn't have a vmch mod since it is rev 3.3 and i am not sure how to figure it out.Quote:
Originally Posted by ghost101
but 522 fsb on the l627a is what i have and i am pretty happy with it.
do you have any results yet? What does GF mean?:confused:Quote:
Originally Posted by Markmk
3.5GHz runs now with my E6400..7x 500MHz..screen update soon!
CPU name : E6600
OC: 3705GHz 411x9
Stepping: B2
Week: L631F
Vcore: 1.58v in bios .. dont know about droop. im guessing 1.54v during load
Cooling: Water
Cooler brand/model: Swiftech Apogee GTX
Ambient Temp: 23C
Load Temp: fluctuate between 44C to 46C
Motherboard: Asus P5N32-E SLI PLUS
Bios Version: 0602
Operating System: Win XP PRO SP2
RAM brand: OCZ
RAM rated speed: PC8500
RAM actual speed: 1070
Latency: 5-5-5-15
http://i121.photobucket.com/albums/o...2/Shot0045.jpg
http://valid.x86-secret.com/show_oc.php?id=184663
aqua what's your NB temp?
i put a 120mm fan blowing it
hey tell me how u get bios settings to a text file?? for asus boards??
i see pppl do this:
vcore : ...v
vdimm ...v
linkboost : disabled
how u do that?
yes but what's your NB temp?Quote:
Originally Posted by theteamaqua
no idea .. does NB temp matters?
on the P5n32-E SLI PLUS yes it does.Quote:
Originally Posted by theteamaqua
the heatpipe dont feel very hot .. if that helps
you can install asus probeQuote:
Originally Posted by theteamaqua
it supports Win2K / WinXP / Win2003 / WinXP 64bit / Win2003 64bit / Vista 32bit / Vista 64bit
User Name: likewhoa
Stability: 8hours+ Blend Mode Orthos
CPU: X6800
OC: 3750MHz
Stepping: 6 B2
Week: L632
Code: A430
Vcore: 1.523v (cpu-z shows as 1.213)
Cooling: Water
Cooler brand/model: Swiftech Storm Rev2
Ambient Temp: 23C
Idle Temp: 35C
Load Temp: 50C to 60C
Motherboard: DFI Infinity 975X
Bios Version: 12/6
Operating System: XP 32 SP2
RAM brand: Mushkin
RAM rated speed: 8000
RAM actual speed: 511
Latency: 4-5-4-11
http://ocidb.com/albums/userpics/100...25%2B250mV.png
User Name: CrimInalA
Stability: 48hours Blend Mode Orthos
24/7 settings :
CPU: E6300
OC: 3430MHz
Stepping: 6 B2
Week: L629
Code: A
Vcore: 1.39v (1.475 bios)
Cooling: air (passive)
Cooler brand/model: Scythe ninja
Ambient Temp: 21C
Idle Temp: 45C
Load Temp: 63C to 66C
Motherboard: Gigabyte DS3 rev 3.3
Bios Version: F11a (beta)
Operating System: vista ultimate 32bit
RAM brand: Team xtreme
RAM rated speed: 5300
RAM actual speed: 490
Latency: 5-4-3-10
Cpu-z crashed when i pressed save validation file while orthos was running , and vista crashed along happily .
So i took a screenshot with the ordinary camera :)
Cpu-Z validation :
http://valid.x86-secret.com/show_oc.php?id=185012
http://www.skybed.be/temp/E6300/E6300_3430_490x7a.JPG
http://www.skybed.be/temp/E6300/E6300_3430_490x7b.JPG
http://www.skybed.be/temp/E6300/E6300_3430_490x7c.JPG
http://www.skybed.be/temp/E6300/3430_cpu-z.jpg
The Screenshot must have orthos/Prime running.. Idle or crashed results will not be included from now on.Quote:
Originally Posted by CrimInalA
haha pwned
And another 48 hours later :stick: :eek: :D
Amazing 48 hours on. Are you sure that board is still up and running :p:Quote:
Originally Posted by alpha0ne
well my infrared thermometer just arrived .. i measured the NB heatsink its about 100F ~ 38C idle , and about 110F during load.. the one right above itQuote:
Originally Posted by safan80
the extended one was like 85F idle and 93F load
i don't care if i make it to the table or not :woot:Quote:
Originally Posted by safan80
my hardware is rock stable :D
I got my g.skill hz's in yesterday, tossed them in and tried to figure out what timings i could get it to run with my overclock.
Problem was that it seemed like my system wasn't handling the same overclock at 1.55 vcore, so i ended up doing 3.535 w/ 1.48 vcore instead. Still pretty happy with the results.
User Name: Zbomb5610
Stability: Orthos (11+ hours)
CPU: e6300
OC: 3535 mhz
Stepping: 6 B2
Week: L627
Code: A792
Vcore: 1.48
Cooling: Air
Cooler Brand/Model: Scythe Infinity
Motherboard: Gigabyte 965P DS3 Rev 3.3
Bios Version: F11a
Operating System: Windows XP 32
RAM Brand: G.Skill
RAM Rated Speed: PC6400
RAM Actual Speed: 1010
LATENCY: 4-4-4-8 @ 2.2v
http://aycu06.webshots.com/image/155...3081533_rs.jpg
http://aycu34.webshots.com/image/138...7048261_rs.jpg
I'd say it is! good job! :party:Quote:
Originally Posted by CrimInalA
sorry i was on a long vacation! call it getting involved with somebody i guess lol ! I got back and i will be updating this tmr!
cheers :toast:
hope you had a good holiday.... now get your (banana) to work!
User Name: Comminadian (Replace my other entry please)
Stability: 9 Hours Orthos
CPU name : Xeon 3060
OC: 3702 MHz (463x8)
Stepping: 6 B2
Week: L628
Code: B299
Vcore: 1.42v @ Load (1.42v idle, 1.4375 BIOS, Board is pencil modded for vDroop)
Cooling: Water
Cooler brand/model: Apogee GT
Motherboard: Asus P5B-Dlx
Bios Version: 0804
Operating System: XP 32
RAM brand: G.Skill
RAM rated speed: PC6400
RAM actual speed: 926 MHz
Latency: 4-4-4-12
http://img338.imageshack.us/img338/8012/463x8kl6.png