Are you for real? :slap:Quote:
Originally Posted by Pirated
Printable View
Are you for real? :slap:Quote:
Originally Posted by Pirated
@alphaone:
@er1k:
I am just asking who where using socket 939 opterons not the way you answer me, buset!
Just a note about mal and preamble that everyone keeps asking about is that these are highly dependant on your ram. You need to find the settings that work on YOUR ram and the mal and preamble settings you can use will change with clock as well. Just because they are opterons doesn't mean that you can use the same mem settings on diff types of mem. If it worked that way I'd get some value ram and run it at 260 2225.
These are ram timings not cpu timings.
Pirated- This whole thread (all 70 glorious pages of it) is about 939 opterons. If it wasnt so late, I would have taken a laugh at your expense too, but others already beat me to it.... :slash:
I'm insanely jealous of your 0528 cabne sausage. That thing should be awesome.
Although I don't have a board for my 0536 I'm guessing I'll get 2800 stable if I'm lucky
I don't even want to go 1.6 unless I can help it. Popping the lid doesn't really bother me but after I lapped my sweet 2600 and it died after 3mo's anything that keeps me from rma'ing is not something I want to do.
When your broke, and pay arseloads of child support it's not as easy to buy toys and blow them up. Take a lesson kids....wrap your rascal and don't believe it when they say they're on the pill. :nono:
Hmm ... sausage envy. :confused:Quote:
Originally Posted by gbomb944
Double bag it. Paper and plastic.Quote:
Originally Posted by gbomb944
How about reading this thread starting at page 1? :slapass:Quote:
Originally Posted by Pirated
Well the jury is still out but I have feeling his e-sausage is going to be bigger than mine.
Lexdiamonds: Thank dud's if you're quite hesitant to divulge the thread about socket 939 opterons. Anyway, i am a bit slowly in viewing the thread. So, for that sorry if i disturb your serene moments, hehehe...
It is clear that i've said anyone using 939 opterons because most images of the thread showed mostly socket 940, i am right? So, why are maggots keep on bullying me, huh!
Can you understand? I here to know more about 939 opterons not to talk to you, ok...
This is what I love about XS. Despite our language barriers we're reaching out to each other and ... :slapass: Its the universal language apparently. :p:Quote:
Originally Posted by Pirated
BTW the 940 you see is just CPU-Z reading it wrong. These are all 939s here.
That's a bug in CPU-Z, it doesn't recognize S939 Opterons, will be fixed in the next version of CPU-Z i hope.
Using my custom meanwell psu to over volt my MCP650 has helped a tad for oc'ing
http://www.fileshosts.com/watercooli...tompsu_005.jpghttp://www.fileshosts.com/watercooli...tompsu_027.jpg
http://www.fileshosts.com/watercooli...tompsu_003.jpghttp://www.fileshosts.com/watercooli...tompsu_004.jpg
Top right pic you can see the white plastic dial to adjust the voltage output. I marked the max voltage output on the black switch/relay box myself to tell them apart :D
This is with MCP650 at 13.23v - seems to get a bit more stable and finally completed 32M at 3024mhz! Timings were looser than my sub 24min time at 3015mhz though heh.
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
Kayl did an excellent job as last night i let the psu run my MCP650 @13.23v overnight and no probs. Noticed post-load temps drop to idle levels alot quicker now.
i.e. with 1.55v vcore
before at 12.4-12.6v on MCP650
before stressing cpu idle = 38C
cpu load = 49-52C
post stressing cpu idle = would drop to 40-41C for 1-3 seconds and then drop to 39C then 38C
now at 13.23v on MCP650
before stressing cpu idle = 37-38C
cpu load = 46-51C
post stressing cpu idle = would drop immediately to 38C
I guess the custom psu would have better improvements overvolting MCP600 or MC350 pumps but seems MCP650 is liking it too :)
Going to play with the voltage output and see what's best for my MCP650.
@gudamit
@zeus
Thanks for the great info's... That's a nice person i know not like others here, right? Even if where not known each other personally be courteous, ok!
I love friendly person... :)
my local Aussie retailer's latest opteron 146 batch are CABYE 0540FPBW should have mine by end of this week :)
more fun :D
OK now I have a dilemma.
CABGE 0536 VPMW- 144
or
CABYE 0530 GPMW--146
both on e-bay
the 146 ran 2,6@1,45V Prime stable on a AV8 3rd eye
The 144 never ran.
Gennerally speaking which one is better 144 or 146? Or maybe 148?
advice, suggestions, cheques, :D all welcome
I'd go for the 146 because of the 10x multi and the cabye stepping.
Late but nontheless...Quote:
Originally Posted by Pirated
You either:
A: Are retarted.
B: Have a sick sense of humor.
Thanks for a good laugh this morning! :clap:
I get that alot :rolleyes:Quote:
Originally Posted by gundamit
what sort of chips are being rolled out atm? are there any good clockers still coming, or are we onto the crap ones now :)
Quote:
Originally Posted by Chicco85
I made a first rapid test... 2530 Mhz v.core default...
Now I'll try ti increase the v-core.
Alright pirate I suppose you can be let slide since the title of the thread doesn't specify 939, maybe it should be changed but anyway everything here is 939. You should still read some of a thread before posting I'm sure it's in there somewhere. Only about 20 guys have asked the same question.
also it's "dudes" not "duds". duds is not really a good thing to call people in english. It's a bomb that didn't go off or somebody/thing that sucks. a lamer.
I agree all... you're great. Anyway, whatever it is... come's from mistake! woot... sorry all, newbies here... if god forgives ~ i'm not talented as you are like 75suasage... i want to eat this guy, hehehe...
OT:)
Back on the topic....
Here in Norway no opterons are available at the moment, I am more interested in the DC OPTY's, are they available in the U.S ? Haven't found any OC results yet.
You can get the DC Opterons also in Germany. www.alternate.de or other big vendors. Try it with www.geizhals.atQuote:
Originally Posted by furyfax
[QUOTE=Rufus7]You can get the DC Opterons also in Germany. http://www.alternate.de/html/shop/pr...l3=Sockel+939& or other big vendors. Try it with http://www.geizhals.at/?cat=cpuamd939
Thx for keeping a sense of humor... ;)Quote:
Originally Posted by Pirated
and by the way, I'm with the n00b crowd.
Quote:
Originally Posted by furyfax
here also , they are available :
http://www.bel-hardware.be/forum/viewtopic.php?id=675
if you order quickly , it will be CABNE 0540 APMW.
But I'm interested in the dual core opterons! The OPTY 170 is the one i want. I just spoke with a guy i know in a computer shop and they thought they would have the OPTY 170 within 2 weeks. I have to save up som cash and then I'll get this CPU! :D
Is the CABNE 0540 really good OC'er?
The CABNE0530APMW certain but the 0540APMW??? Test it and we will know it.
Haven't seen any result of the CABNE 0540APMW just yet. Or have i missed it? :confused:
i tested it, the previous page.Quote:
Originally Posted by Rufus7
Sorry Pt1t.
But 1 Exemplar is not representativ only shows the Way of the Stepping.
And the 0540 Needs a lot of Vcore for 3 Gig.Too much for my Taste.
Stress the Hardware too much.
Quote:
Originally Posted by Rufus7
with 1.6v hardware isnt too much stressed , with the cabge 144 0536 vpaw i ran 32M @ 1.84v cpuz
Good Luck for the other one. And allways cool water.
Pt1t post your result of the other CPU when it's ready!
For 3ghz 1.64v , i have 27° idle and 43-44° after 4h of prime.Quote:
Originally Posted by Rufus7
Quote:
Originally Posted by furyfax
I have to finish to work !
No you don't :p:Quote:
Originally Posted by Pt1t
Good luck with it though!
If the DC OPTY's are available elsewhere why aren't there any results posted yet! I have made an " The Unofficial Dual Core Opteron Overclocking" Thread for results.
Here is one from Germany where i´m daily looking and typing.
http://www.forumdeluxx.de/forum/showthread.php?t=162502
Originally Posted by chz
I'm using the 618 bios without problems. Anyways getting tired of my 57-ish load temps i decided to whip out the razor and cut off the ihs. Cleaned it and the core, added some arctic ceramique instead of the stock crap and put the IHS back on. Since i'm too much of a chicken to risk my opty with my cnsp 9500 which weighs a ton i wanted to see if even something as simple as this made a difference.
My load temps are now 48-50.. thats almost a 10C drop just by replacing the paste.. the ihs is still there protecting the core, insane. Don't know what they did during the manufacturing of these optys but placing those intergrated heatsinks sure was a shoddy job.
Not bad, I may have to do this. Just have to stick it back on nice. does anybody know what the black goop they stick it on with is?
I tried 2900MHz with lowest Vcore.
144 0530 APMW under water for long time at prime.
http://mitglied.lycos.de/freestylerc...2V%20prime.JPG
free
ooo now THAT im down to try, but i hope it can be secured back on properly ya know...Quote:
Originally Posted by gbomb944
http://users.skynet.be/pt1t/144/7002.PNG
i tried 3dmark with high vcore , 1.62v needed , but i m testing the gto²
J'attends mon proc de Computersmsa :-)Quote:
Originally Posted by Pt1t
Gotta love that "Can't score? Maybe it's your hardware!" add in the 3dmark window lol!
Well I cancled my order for my 144 thru my vendor and ordered a 146 from ewiz, it will prolly be crap but oh well. :rolleyes: I should have some results this weekend.
I have found time for me, my CABNE 0540 APMW is in socket !
I will test the max stable @ 1.4V this evening, the rest tomorrow.
Excellent. Preliminary results will be available from me on Friday - too much work until then, still have about 4 essays in total to write for this week :(Quote:
Originally Posted by computersmsa
hmm is it still worth ordering an oem 146 from monarch ?
[OT] nice avatar [/OT]
perhaps, in Europe the belgian mega order is a better deal it seems.
The only peeps that would know the answer to that is Monarch. Good luck getting them to tell honestly though... unless you personally know someone inside their warehouse. :)Quote:
Originally Posted by jetjaguar
i called to see if they had any in stock .. and he is like are you looking for a special stepping .. i was like yeah i guess .. he said we dont have them .. but ordering a oem 146 .. maybe i could luck out
well im sure even the crappier ones still hit 2.7 which is better then my 2.6 winnie o/c
also will the opterons work with 2gb crucial ballistix
Hmmm, strange CPU's those Opterons.
I can complete SuperPi 32M at 3130MHz but trying 3150Mhz for SuperPi 1M is very close to the edge.
Sometimes it finishes, at other times it just bluescreens.
Anyone else found this?
Quote:
Originally Posted by Zeus
Zeus, That is almost the exact same boat as me. I have a 0528 148 CABNE and it is 24hr prime stable at 3102, but I can only manage a SPi 1M @ 3150.
I am watercooled, but temps are around 55 at load. This is at 1.55v. Popping the IHS is tempting... I have loaded windows at 3200 and it would be grand to get that stable, but I think that is pie in the sky.
ok well .. i just ordered a 146 opty from monarch .. the guy said they had 7 in stock .. so we shall see what happens .. if i can hit 2.8 ill be happy and then sell off my winnie ..
should definitely be better then my winnie .. 1mb cache at least
Five or six times I've completed my highest oc on 32m and when I pull up paint and hit ctrl-v, reboot . Makes me want to cry. :(Quote:
Originally Posted by Zeus
I tried removing my 146 IHS and didn't do too well. Couldn't for the life of me get through the black gook with a razor blade without scaring myself. After much gentle cutting, I bent a few pins and decide to call it quits.Quote:
Originally Posted by gbomb944
Might have to try again...any softening techniques for this stuff?
Put your chip on the plastic foamy square that it shipped in while working on it to prevent bent pins. The black silicon is not hard; most likely you were cutting into metal, which is understandably difficult!Quote:
Originally Posted by Sinnerman49
Yep, I had the same problem, I thought the black stuff was impossible to cut into until I grabbed a really thin and not sharp paint scraper and went right through :D
hej chicco85 , hows the cabge doing? anyone else running cabge steppings ? info please .
Well guys I just put my 146 in from Ewiz(see sig), Got her naked right off the bat :slobber: . I didn't change a thing in my settings, but HTT & Multi and off she went at 3GHZ. I will be priming for a little while later tonight. Also a little OT... I found a cheap way of protecting your naked core from damage, I brought some cheap eyeglass foam nose pads from Walgreens took 2 cut them in half and made it like the old athlon XP's. When you tighten it down it makes perfect and even contact with the core.
Also Idle temps 27c/34c same as my 3000+ Venice :woot:
Will post screenshots later
OK, got my new chip today from Monarch. Its a CABYE 0536. I pulled my 3700+ SD and cleared CMOS and dropped it in. 2500 then 2800 (same as SD but stable at 1.40v insted of 1.52v). Tried 2900 but Windows blue screened. Bumped the voltage to 110% (1.50)... wow booted right in windows and look stable... will try 3000 soon and let you all know. :woot:
Make sure you are using a super thin blade, like the ones in my pic, got em at Walgreens in the shaving sections. I've done 5 or 6 chips so Im pretty quick at it now. Here are my initial results after about an hour of playing with settings. Gonna start tweaking on it now. Any suggestions?
Pic
Your link doesn't work.
A64 Opteron146 CABYE 0536GPMW- 2900mhz - 300x10
Better change your sig too. ;)
Here is my first run after switching from Abit An8/sli to DFI UltraD/sli modded.
Opty 148 CABYE 0528GPMW
MaxTcase = 67*c
http://xs52.xs.to/pics/05433/3003MHZ.jpg
That was my first run on this mobo and I haven't started tweaking yet.
4x512 sticks of Uber crap ram thus timings are kept low so as not to be an issue.
Does anybody run those cpus with BIOS 510 or other? Im on 510-2ModFix because with 510 versions of Bioses I can normally reboot my dfi board, with any others my pc hangs for 45 sec or more when it's just about ready to halt and restart.
@Badge56, want to see results from you (got same stepping), Prime that cpu please, I can do 3010Mhz 1.63v, 32M Super Pi but Prime fails in ~3sec, now I run 3Ghz at 1.63v and it primes for ~5 sec :slap:, but in gaming and windows stable
Quote:
Originally Posted by Repoman
So I assume Utility Blades (IE: From Home Depot....) are a bit too-much. That would make sense....
Is it easy to crush the core while trying to mount...say a XP-90? It sure does take a little force when mounting it with the IHS on, I'd hate to crush the core.
yeah, i'm having that issue with my 146 too. i'm placing the blame on the cpu side of the memory controller.Quote:
Originally Posted by dogsx2
Now running 3000, but had to bring Vcore to 1.6v. Core temp is 32-35C.
at idle and does 38-39 working :-)
Stable with SuperPi.... more testing.. but its at 3000 mhz... yohoo !!! :woot:
@ Plywood-
Nice results, but that Windows color scheme makes me want to burn my eyes out with HCl acid.
Got the last part of my new system (DFI NF4 ULT-D, OPTY 148 CABYE 0528GPMW, X800) in the mail today...i am really excited to see what my opty will do...results will take a few days, as re-doing my system is a tiresome process (cooling in particular...)
Plywood99, you have the same chip i do, i hope to see similar results, maybe better, as i will be phasing this.
Here is the fixed link to Laydback pic.
LINK
laydback, take out the second http// and you should be good to go. ;)
actually, i'm having that issue to the extreme. prime95 blend and sPI 32m stable at 2830mhz with 1.35v, but.. 2836mhz = corrupt cpu-z validation :slapass:Quote:
Originally Posted by ozzimark
Before you start bumping it up, can you lower the volts to find your lowest volts for 32M stable at 3ghz.Quote:
Originally Posted by Plywood99
I just got my 146 tonight, what's the MAX voltage someone would suggest under a Big Typhoon?
I have a couple quick questions I hope you guys can help me out with.
1) How many people are running a 146 Opty on Phase (and what clocks)
2) Is anyone having problems running 1:1 with TCCD
Right now I am at default volts (1.36v) under phase at 1:1 at 3.1ghz 32m and prime stable. I am trying to see if I can take my ram and clocks a little higher but was looking for some ideas where to improve.
I found that my opty likes Max Async at 8ns and Read Preamble at 5ns. Has anyone else run into this? Also TRRD at 3. I have never run into this before. Thanks!
Will do tomorrow after work...Quote:
Originally Posted by gundamit
Cabge are not the best clockers, 2.7-2.8ghz in general it seems. My 146 Cabge won't go much higher than 2.7.Quote:
Originally Posted by vanovich
got my CABYE from monarch.
verified tonight max 2906Mhz on my evga free motherboard at 1.62v
and this baby is about 3-4C cooler than my San diego at 2.75Ghz with same voltage same maxTcase.
currently running 324x9 on my 146 on 1.55v. It's a CABYE 0536. MaxTCase says it's 59c, and it hits 56c every once in a while during prime. Oh well :P
Voltage/Clock/Heat characteristics vary quite a bit. Which stepping/week did you get? 0536 CABYE seems to taking over 1.6v without nearly as much heat. Unfortunately maybe not as much OC either. Eva2000 took his 0536 CABYE to 3.03ghz with 1.65v 32M stable.Quote:
Originally Posted by DamienKC
That's pretty good, I would try 1.6 with the side panel off just to see if u can hit 3 gigs stable. So.. now that u got that, my cpu will be shipped out tomorrow right? ;)Quote:
Originally Posted by DamienKC
Yeah....about that...I didn't plan on waiting so long to ship it (seriously, I didn't). I meant to ship it monday but I haven't been home (DBZ marathons @ friend's houses own me way too hard.)Quote:
Originally Posted by fareastgq
ANYWAYS, I tightened my BT QUITE a bit more and It's not hitting over 52c now. 1.65v? On air? I'm a little worried to do that...but I ran 2.95ghz in 3dmarks on 1.55v with NO issues at all, I guess an extra 50mhz could be done with a tad more volts.
http://users.skynet.be/pt1t/144/Sandra_277.PNG
What are optimal ram timming for opteron ?
This is the exact same stepping as mine and it rocks... got it 3200 mhz 32M stable (look at previos posts around page 68 i think)Quote:
Originally Posted by Plywood99
Is that on air pt1t?
I'm thinking about ordering a s939 opteron 148. The steppings available are:
cabye 0536 gpmw
cabye 0535 xpmw
Which one should I get?? Have anybody here had good experience with any of these steppings, espeically on single stage?
Air on the DDR :D (new BH5 chips)Quote:
Originally Posted by DamienKC
Wc for CPU , but WC VS Good air for short benchmark is +- the same when room temp isnt too high.
Hey.Quote:
Originally Posted by Oden
Since often better steppings have had later vocabulary letters in the stepping I would chous the later one..
Another question, its stepping related also, 146 cabge 0536 vpmw, does cabge suck always or could you frankly be lucky?
Thanks!!
When I finnish a run I always press print screen first, then I boot up clockgen to lower the clocks to a stable level and then I'll open paint for some ctrl-v action :)Quote:
Originally Posted by dogsx2
Try Xpmw..they was good before, but i have not seen screens on them with opteron yet. cabye is not the best it do about 3.0ghz with 1.7v(Air,most of users use air).Quote:
Originally Posted by Oden
(Pm me where you can buy them)
And new steppings are fun to test :)
Are you saying I wont go especially higher than 3.0Ghz with a LightSpeed???
I would not try 0536 vpmw...this is a 144 ->Quote:
Originally Posted by Razor_cut
MonsterProzi 0536 VPMW yes Lukü Prime 2661 Mhz @ 1,55v
ehh my Cabye is 32M stable at 3150 mhz at 1,69 on water...Quote:
Originally Posted by Lastviking
hey whoever asked. yea it seems that i have probs running 1:1 with my 146 as well.... up to when i was within range. after that the 183 and 166 dividers gave me probs so i been using 150 and 133 since then.
testing my 146 from computersmsa, and it isn't the better, but not too bad
full aircooled box moded 24v :D
http://wowgame.free.fr/Opteron%20146...0Mhz1.648v.jpg
2800Mhz 1.552v SuperPI 1Mo ok
2860Mhz BH@286 CAS 1.5-2-2-5
http://wowgame.free.fr/Opteron%20146...20%e0263.5.jpg
and quick max screen :
http://wowgame.free.fr/Opteron%20146...Z/cpu-3072.jpg
PS: not optimized times, just for test :)
Got my CABNE 148:
http://www.cons.org/cracauer/miss-cabne.png
Did a whole day benchmarking 2900 GHz on stock volts (which seems to be 1.4 Volts).
where did u order that ?Quote:
Originally Posted by Martin Cracauer
Water is always water maybe the most make 3.0ghz 1.65v on air and 1.7v 3.1ghz+- on waterQuote:
Originally Posted by t-max
Ordered from Compumusic when they were giving out the exact markings of this chips they have in stock.Quote:
Originally Posted by furyfax
Packaging for shipping was major suckage, though, the green inlay to hold the HSF and CPU was totally crushed, at first I though the CPU is missing :)
Forgot to say the 2.9 GHz stock voltage are with a Big Typhoon, AS Ceramique and my DFI SLI-DR.