Printable View
The 148 will sell for more but you gotta get some better results with it. Lower the temperatures somehow. Sounds like you have the heatsink seated wrong... i have the exact same stepping and mine runs fairly cool. Mine was however, VERY temp sensitive, but it's also a VERY good overclocker. Try to get the load temps down to 45C and it should do 3+ ghz easily.
Hello XS!
Do anyone have test Opteron stepping CACJE with DIce? Do it coldbugs like CAB2E ?
sorry that i reply my self but how about CACJE
sorry that i reply my self but how about CACJE ?
@Absolute0, hope you get your cooler setup to where you want, it looks like that chip needs some testing!!
Shark-357, nice results very good 1m time. Could you post here as well ? I'm making some tubes now and will post results of testing as well. http://www.xtremesystems.org/forums/...ad.php?t=85098 **edit**OMG, Shark, get some grease/insulation around the bottom of your tube. Ice on socket :nono:
Opteron 146 in Super PI 1m action:banana: http://img54.imageshack.us/img54/8514/superpi1ms1ko.jpg
Quote:
Originally Posted by turbox997
Yes I would like to know the answer to that one also. My 148 0545 does 3102mhz (282x11) with no divider and bh5. Temps are in the teens and I have had it to +1c-+3c before.
Cold bug usually kicks in in the negatives with these CAB2E steppings. You'll notice it locking up at higher HTTs peeds prematurely. For example my CAB2E was able to clockgen past 300 HTT on watercooling. On my phase change i couldn't go past 260.
Opteron 146 CABQE 0547 GPAW
http://valid.x86-secret.com/show_oc?id=67935 @ 3.2 Ghz @ 1.575 vCore
cooling : zalman pure copper 80mm
stable ? no... need more vCore to get it stable...
Nice stepping !
I can boot with my CABQE 0547 GPAW @ 3ghz !Quote:
Originally Posted by Absolute_0
on air !
vCore = 1.550v
Absolute.
How much it is the maximum that has obtained with Water Cooling?
That good chip has between its hands :)
Until soon
Opteron 148 only tested it for a few days seemed ok ran 4 dims of Geil One W BH5 well.
my CAB2E was benchable at 3.2 Ghz on watercooling, pretty good chip. I could have got it further with more volts and IHS removed, but it was a resale chip, its on ebay now.
I have NO IDEA what my CABYE does under water.
CABQE 0547 GPMW Batcher 0133
Stock cooling, stock volts, JUST put this thing in
SP2004 now at 7+ minutes... EDIT 13 minutes :)
Load temp as you can see is 52C
http://img87.imageshack.us/img87/615...ndvolts2tb.jpg
Maybe 2.9 on stock volts and stock cooler? 3+ on good air...
EDIT
Looks like around 2.87 Ghz will be the max prime for stock volts and stock cooling. Once i get load temps down i'm sure it will fly. I'm gonna up volts to 1.4 and see how it compares with my Opteron 148 0547 GPMW, which was a kick ass chip.
EDIT
2.86 GHz stock cooler stock volts max (52C load)
2.92 Ghz stock cooler 1.40 volts max (53C load) check it out http://img.photobucket.com/albums/v7...ABQE/bew/2.jpg
---> phase change.
COLDBUGGED BADLY. Sorry everyone, the CABQE is terrible... couldn't load windows at 250x10...
OFFTOPIC
strange thing :
I replied to a post of Absolute_0, and my post came ABOVE his post ?!:confused:
Quote:
Originally Posted by coop
Thx for heads up mate:)
Spi could be better if i had another bench instalation(the one i used was a win 2000 with 3DMark01 tweaks )...+ the antec was holding down my OC coz my PSU is @RMA..
Bout the insulation yeah i know next time i will make it better :D
Yeah man i can boot past 3 Ghz with 1.4 volts on the stock cooler. I'm just saying on my phase change i can't boot at 2.5 or more because of the cold bug. It's particularly bad if its kicking in at 250 htt.Quote:
Originally Posted by brechtvm
Quote:
Originally Posted by halo112358
thats strange i have same CPU and same steping and i run 3ghz@1.40v 100% stable WC and 3ghz@1.42v/1.45v aircooling 100% stable i think 3ghz@1.60v its too much for this steping , i also run 3140mhz@1.53v:
opteron 148 CABYE 0543 FPMW:
http://img90.imageshack.us/img90/1709/occtstable8jl.jpg
http://img481.imageshack.us/img481/6064/pi32m2yv.jpg
http://img368.imageshack.us/img368/1974/2k1novo5ew.jpg
Good news i just received two more Opteron 146s
1) CABQE 0547GPMW batcher 0351
2) CABQE 0547GPMW batcher 0256
since my CABQE0547GPMW batcher 0133 does 2.92 Ghz on the stock cooler, i have high expectations for these!
oh man, i need to start spending my hardearned money more wisely so i can be able to afford to buy more cpu's to play with ;)..rather than living costs, haha. I should skip a few meals so i can invest in stocks and then with my returns I can invest in cpu's, lol...yeah i know i'll have that pic of my bench posted soon, i'm just so lazy when i get home, i'm on my laptop...school work, etc..life.
Hi upgraded my pc to the following:- delighted.....I think there is more to come!!!
Pc specs:-
Asus AN8 SLi Premium
Opteron 144 1.5V
Shark case
Thermatake water cooling for cpu
Kingston PC4000 1gb
6800GS
39160 adaptec scsi card driving 15k 75gd segate drive + 36 gig drive
2 ata 100 drives
Tagan 580w Easy Conn
running 2.7ghz
htt x3
fsb 300
divider 266
My lovely baby was sold 2 weeks ago......:(
http://www.xtremesystems.org/forums/...3&d=1138635858
System specs:
http://valid.x86-secret.com/show_oc?id=67360
MSI K8N NEO 4 Platinum
AMD Opteron 148 (CAYBE) 3.03GHz stable 2+ hours p95 1.45 volts! :)
2x512 mb Crucial ballistix
WD800JD SATA 80GB hdd
PCI Video card *for now
420w Enermax noisetaker
Lian-li PC65B
Opteron 146 @ 3.33 Ghz
AMD stock cooler
1.6v
66F ambient with a fan aimed in my case
http://img.photobucket.com/albums/v7...ABQE/bew/3.jpg
Opteron 148, CACJE 0552 FPEW Arrived today. :D
Does anybody have same stepping?