Mine has some trouble above 300 esp. if the Read Preamble is too low. Also I've found that 11x will boot easier than 10x given apropriate HTT.Quote:
Originally Posted by TEDY
Printable View
Mine has some trouble above 300 esp. if the Read Preamble is too low. Also I've found that 11x will boot easier than 10x given apropriate HTT.Quote:
Originally Posted by TEDY
I am done with mine! LoL Selling it in the forums. Thanks for all the help people. I am going back to using my San Deigo 3700+ for now I guess.
mang i am getting wack temps again... now temps idle at 34-40c.. last night it ran 28-30c at idle... i even went to the store and bought some more as5... still no luck... i cleaned off and reapplied as5 five times and reseated my waterblock... how are you guys getting idle temps below 30c? i just thought opteron ran cooler... im at 1.38v
Opterons are weird
Room temp plays a big factor.
Yes they do. But my San Diego 3700+ at same voltage and clock speed runs 6 full Degrees cooler. Nothing else changed. Alot I think has to do with Poor ISH contact.
finally figured it out... my waterblock was clamped down too tight... so i decided to losen it up.... badabing hopefully for the last time i have to go thru this temp idles at 28c now at 250x11 w/ 1.4v
Here are a few quick low Vcore/Vdimm runs, I have since reduced Vcore to 1.312 (1.33v in bios) and will drop down by .025 each day until I find the lowest torture stable Vcore possible :cool: :D
http://i16.photobucket.com/albums/b2...a0ne/LowV2.jpg
:eek: :eek: :eek: , must be using same ram as me :DQuote:
Originally Posted by Dumo
Quote:
Originally Posted by ridikolous
i also have Watercooling , i have 3ghz@1.40v and im getting 27c idle and 37/38c runing OCCT so its not very diferent temps from you .
W00t! :woot:Quote:
Originally Posted by Dumo
That's a sick opty. What is it? A 148/150?
It clearly says opteron 182. :slapass:Quote:
Originally Posted by DesertShooter
Is Cabye 0543 FPBW a good stepping/week?
Anyone who's willing to sale their Cabne 0528/0530?:P
Quote:
Originally Posted by EboNova
CABYE 0543 FPMW in opty 148 its good steping , i have one and run 3ghz@1.40v
This is a 146. About to buy one but not pretty sure yet.
Yes, I see, but did he bought it as a 148 or 150?Quote:
Originally Posted by Zeus
I am so glad , my opty will be playable this week ....dfi arrises from teh dead i mean RMA :)
You know i love dfi they have the best rma that i know, 1 mosfet was dead en two capacitors were gone and some broken socket :D
yet they did fixed it :toast:
150.Quote:
Originally Posted by DesertShooter
http://img523.imageshack.us/img523/3...z151vocctv.jpg
:banana: :banana: :banana:
Quote:
Originally Posted by dogsx2
Heres my SS totaly stable :
>>> http://img333.imageshack.us/img333/6...able2ng.th.jpg
PI 32M Screenie >> http://img328.imageshack.us/img328/9...0mhz3xe.th.jpg
:toast: :toast:
OCCT and SP 32M are very good tests, but in my worthless opinion, not until it can run SP2004 for eight hours is it "totally stable'. Very nice chip BTW.Quote:
Originally Posted by mascaras
anyone know the word on the latest 148s from Monarch? only 207$ and no tax is tempting...
i fixed my temp now.. now i idle around 22-26c... just needed to tweak my waterblock around... now ive getting good temps...Quote:
Originally Posted by mascaras
What CPU block do you have?Quote:
Originally Posted by ridikolous