2006 x2 3800 Manchesters

hard to say Athlon64OC. Not familiar with that stepping, but most all of the 06's are getting to 2600+ on air afaik.

Quote:

---

Originally Posted by stone_cold_Jimi

Are mostly gorgeous. Let's make that official. :)

I can't believe how good. My LDBFE 0607 has been dual SP2004 behind me for the last hour and a bit, I can open other apps, fool around, it doesn't miss a beat. At 2600 MHz, 1.328v core, 38C on a heatpipe stock HSF. :slobber:

The list (moved from post #357):

stone_cold_Jimi LDBFE 0607 UPMW N 3100 1.62v (Vap LS)
stone_cold_Jimi LDBFE 0607 SPMW T 3000 1.47v (Vap LS)
RLM LDBHE 0602 XPCW 2700 1.45v
RLM LDBFE 0607 TPMW
Learn LDBHE 0605 FPMW 3420 ?V (chilled water sui)
Joe Camel LDBHE 0601 UPMW 3300 1.6V (Mach II)
Babbsack LDBHE? 0601 TPDW 2900 1.39v
Leverpospade LDBHE 0601 UPMW 3100 1.55v (Vap SE)
don_vercetti LDBHE 0601 UPMW 2900 1.55v
Supertim0r LDBHE 0601 TPEW 2950 1.456v (TTBT)
MUCHO LDBHE? 0601 TPMW
Blue078 LDBHE 0601 UPMW 2800 1.45v (water)
BrokenWall LDBHE 0604 UPAW 2400 1.3v
Highland3r LDBHE 0601 UPMH N 2950 1.55v (DD water)
fullup3 LDBHE 0601 TPMW N 2950 1.45v
fullup3 LDBHE 0601 XPMW T 2700 1.44v
Alex08 LDBHE 0601 TPMW N 3000 1.61v (TTBT)
Alex08 LDBHE 0601 SPMW 2800? 1.4v?
tHe_jOkeR LDBHE 0601 TPMW N
smason LDBHE 0605 SPCW N
brechtvm ? FPMW 2600 1.45v
chew* LDBHE 0601 XPMW 3347 1M ?v (DICE?), 3200 32M 1.6v
chew* LDBHE 0605 XPMW
chew* CDBHE 0608 FPMW
afireinside LDBHE 0604 WPAW 2900 8M 1.52v (TTBT)
freddy418 LDBHE? 0601 TPMW 2600 1.35v
Absolute_0 LDBHE 0601 TPMW N 2900 1.55v (water)
Absolute_0 LDBHE 0601 TPMW N 3000 1.6v (water) 3150 1.55v (phase)
Absolute_0 LDBHE 0603 WPDW N 2600 1.4v
Runner LDBHE 0606 EPMW T 2800 1.46v (ACF64)
EnJoY LDBFE 0607 XPAW
SuAsDu LDBHE? 0601 UPMW 3200 1.55v (DICE)
ST4 LDBHE? 0601 XPDW T 2900 1.39v (TTBT)
brut7 LDBHE 0603 WPDW 2500 1.504v
Jester FPS LDBHE 0606 EPMW 2700 1.35V
MonkSP LDBHE 0606 EPMW 2800 1.45v
Cordovader LDBHE 0606APMW 2800 1.408v

This is dedicated to my mum, who died this morning 2nd April 2006.

---

I'm very sorry for you and I want you to know I'll think of you the next few day (if I was religious you would be in my praires).

I wish you a lot of strenght,

Jochenp

in order to update the list :

Quote:

---

Brechtvm LDBHE 0601 FPMW - cooled by ThermalTake Big Typhoon - 1.4250 (on DFI Ultra-D)

---

I also wish you a lot of strenght, and yes, i'm relegious

Quote:

---

Originally Posted by brechtvm

in order to update the list :


I also wish you a lot of strenght, and yes, i'm relegious

---

you forgot mhz?

condolences, man....lost my father on Feb. 24th, and my Grandmother on April 4th. not a good year...prayers for you.

that being said, currently trying to oc a LDBHE 0604 CPMW on air.

will let you know.

dave

Quote:

---

Originally Posted by Jester FPS

This just came in yesterday, right now i'm priming 12 hours in at 2650mhz and 1.375vcore.

Temps are too high for me to take it further, need better cooling (i'll put it under my xp-90 after a 32 hours prime session)

---

I finaly got my new mem (2x1gb g.skill extreme hz) to replace my dead ballistix :( and decided to take my 0601 for a spin.. solid at 2.55ghz on stock voltage 1.325 x 104% .. i'm going to play with my mem and see where I can take it.. it's a T chip (0601 fpmw) so I was told it would perform better under water but I havent completed purchasing my parts yet.. still running it in a p180 under a si-120 panaflo m1a 120mm fan.. idle 29c load 36c..

how high should I risk taking it up with some more voltage?

I think my cpu died :(

Stone_Cold_Jimi

Post #188 in the other x2 thread I had my LDBFE 0607 TPMW prime stable at 2.8 Ghz small FFTs 1.488v and custom blend 8 hrs primed 1.504v. Custom seemed to need a bit more juice

Kind of trivial info taking your news into account. My father is terminally ill with cancer, and I see my mum back in the UK very rarely. I feel for you man and my condolences.

RLM

Just changed my config to an Ultra-D from expert. Was quite optimistic of a better OC given that my x2 required less juice on my Asus premium than the expert. Exactly the bloody same though. Darn it!

Running Tmod 406 just for ref.

Can't believe I'm :banana::banana::banana::banana::banana:ing about 2.8 ghz. :D Envy and addiction.

RLM

Many many thanks for your condolences guys; my mum had been diagnosed with an inoperable brain tumour on 6th January and from then she basically partied as well as she was able until about four weeks ago, bless her. Most of the grieving happens as the symptoms worsen and the person you knew "disappears" or changes beyond recognition as suffering and anguish kick in, so the end is in many ways merciful.

My sympathy to those of you with ailing parents and relatives or recent family losses, I know that pain.

On with the show - I'll update the list later today and try to include any relevant info from other threads; I have to say, being given it all on a plate in one line is luxury brechtvm ;)

ok, for your enjoyment. learning some lessons from last time. :)

http://www.flickerdown.com/forsale/0...x245_thumb.JPG

Here's the link to the larger version: here

the A8N32-SLI overreports voltage.

thanks,

dave

Well, when I was priming last night my system locked up, upon reboot I got the dreaded 3 LED lights, looks like the CPU is dead, tried an overnight CMOS clear and that didn't seem to help...

Quote:

---

Originally Posted by ju1ce

I finaly got my new mem (2x1gb g.skill extreme hz) to replace my dead ballistix :( and decided to take my 0601 for a spin.. solid at 2.55ghz on stock voltage 1.325 x 104% .. i'm going to play with my mem and see where I can take it.. it's a T chip (0601 fpmw) so I was told it would perform better under water but I havent completed purchasing my parts yet.. still running it in a p180 under a si-120 panaflo m1a 120mm fan.. idle 29c load 36c..

how high should I risk taking it up with some more voltage?

---

i FINALLY found someone with the same stepping !

is it alsa a LDBHE revision ?
LDBHE 0601 FPMW ?

hits here 2,6 Ghz @ 1,4vCore..
greatest problem = heat !
(need to cool it down..if i let it go above 50°, i get errors...)

is it possible to show me a picture of your cooling ? because i dont know 'bout which cooling you're speaking :s

Quote:

---

Originally Posted by stone_cold_Jimi

Many many thanks for your condolences guys; my mum had been diagnosed with an inoperable brain tumour on 6th January and from then she basically partied as well as she was able until about four weeks ago, bless her. Most of the grieving happens as the symptoms worsen and the person you knew "disappears" or changes beyond recognition as suffering and anguish kick in, so the end is in many ways merciful.

My sympathy to those of you with ailing parents and relatives or recent family losses, I know that pain.

On with the show - I'll update the list later today and try to include any relevant info from other threads; I have to say, being given it all on a plate in one line is luxury brechtvm ;)

---

sorry for your loss :(

To make updated the list easier for you:

Quote:

---

lawrywild LDBHE 0602XPMW T 2.7ghz 1.55v (BIOS) under XP-90C
lawrywild LDBHE 0602XPMW T 2.6ghz 1.425v (BIOS) under XP-90C

---

Quote:

---

Originally Posted by stone_cold_Jimi

This is dedicated to my mum, who died this morning 2nd April 2006.

---

are you being serious? if so, im really sorry to hear that... :(

stone cold Jimi you have my condolences on the loss of you're mother,my mother in law was diagnosed with a brain tumor in Aug/06. Thankfully she had an operation and radiation treatments and today is better than she has been the past couple of years!
I am recieving a 4200X2 LDBHE 0606BPMW "N" tomorrow,
would it be appropriate to post reults in this thread?
I was going to buy a 3800X2 however this 4200 was just too good of a deal to pass on!

Quote:

---

Originally Posted by mongo

I am recieving a 4200X2 LDBHE 0606BPMW "N" tomorrow,
would it be appropriate to post reults in this thread?
I was going to buy a 3800X2 however this 4200 was just too good of a deal to pass on!

---

Thanks for your thoughts mongo. Your new chip looks interesting, but it ain't a 3800! However, I'd love to see your results in the Official x2 OC thread - good luck with it.:D

Quote:

---

Originally Posted by brechtvm

i FINALLY found someone with the same stepping !

is it alsa a LDBHE revision ?
LDBHE 0601 FPMW ?

hits here 2,6 Ghz @ 1,4vCore..
greatest problem = heat !
(need to cool it down..if i let it go above 50°, i get errors...)

is it possible to show me a picture of your cooling ? because i dont know 'bout which cooling you're speaking :s

---

yep yep! i'm also quite happy to see someone else with the same cpu.. I searched all over locally for a decent stepping and found only 1 0601 and it was the fpmw which for the life of me i could find no refference to online. Since everyone said 0601s in general were decent I took the plunge and i'm much more impressed with it over my older toledo 3800+ x2..

I will take some pics today of my setup.. The temps are pretty high on this chip for just being stock voltage and a decent overclock.. my toledo needed like 1.5v to reach 2500mhz this one does better at 1.35 .. I would definately like to see it under water at 3ghz though :)

Dunska LDBHE 0606APMW N 2.66ghz 1.3v (BIOS) under TTBT

Quote:

---

Originally Posted by Dunska

Dunska LDBHE 0606APMW N 2.66ghz 1.3v (BIOS) under TTBT

---

What is TTBT?

Quote:

---

Originally Posted by Jester FPS

What is TTBT?

---

Thermaltake Big Typhoon

dave

update: LDBHE 0606 EPMW T chip 2800 @ 1.425 still on stock non-heatpipe hsf.

i got a x2 3800 0607 SPMW on the way, ive only seen 2 others with same stepping ...ill post results when i got it running. any comments on this stepping?

Quote:

---

Originally Posted by a5h

i got a x2 3800 0607 SPMW on the way, ive only seen 2 others with same stepping ...ill post results when i got it running. any comments on this stepping?

---

One of mine is LDBFE 0607 SPMW, currently running with a stock 4600+ HSF at 2700 / 1.392v. It actually bested my 4600 at 3GHz on phase by running 1.47v against 1.5v. Good luck, hope it's as good. :up:

Quote:

---

Originally Posted by stone_cold_Jimi

This is dedicated to my mum, who died 2nd April 2006.

---

Jim my condolenses..may God bless you and your family....and thanks again for accumulating all the X2 OC data! Wish there was something similar with Optys!