More like granny smith vs. delicous red. They are both PC4000. Am I the only one that thinks "apples to oranges" is a bit overused?Quote:
Originally Posted by JNav89GT
Hardly worth mentioning imo.Quote:
Originally Posted by Duonger
Printable View
More like granny smith vs. delicous red. They are both PC4000. Am I the only one that thinks "apples to oranges" is a bit overused?Quote:
Originally Posted by JNav89GT
Hardly worth mentioning imo.Quote:
Originally Posted by Duonger
edit
Since OCZ 4000 EBs are gone (New Egg anyway) I decided to pick up a pair of these. I hope they do 265-275. Had them shipped next day, will post back soon with results:)
:toast: I purchased these..had them for 3 dayz :toast:
Bios issues mostly with these so far..stock bios on Dfi Ultra-D...horrible
704-2BTA ok for the CPU 330...not so good for the memory
N4D623_3 CPU unknow---Memory Poonage for sure 270 no memory errors running for like 1 hour so far
At first with this bios I recieved memory erros at 270 lots....Optimized the settings...they went down to 2 each pass
Lowered the Vdimm to 2.8 they went away
Rebooted and set Vdimm to 2.7 and no errors at all
Must of been heat related...for me thats odd because i have bh5 speed prem.and I pump 3.2 w no fan..but i guess each type of chip is different
This is all with optimized settings...Ill try charlies as I go higher and have problems...
330 X 10 is my CPU max...
I want 300 on my memory..but I think thats gonna be impossible
This thread has been a ton of help thanks guys...mucho
These Infineon chips don't like higher voltage. I would say 2.7-2.8 max. What are your timings at 270mhz?
mine do best at 2.9 +0.03v ;)
Heatspreaders on these are beautiful, might just pick some up for an s754 system...
http://www.newegg.com/Product/Produc...82E16820146396
...and ofcourse, very nice ram.
Perkam
http://www.xtremesystems.org/forums/...1&d=1134855161Quote:
Originally Posted by JNav89GT
http://www.xtremesystems.org/forums/...1&d=1134855691
these are my new redlines/ they crap out around 280 so far. I can pass max memtest 86 with no errors at 280 1t 3-3-2-7. windows is different. I think its the mem controller. crazy thing is the video problems. ati vpu recover always comes on and screen gets all messed up. (see 2nd pic) also my pi score was slightly lower changing TRP to 2. 3-3-3-7>3-3-2-7
pretty nice sticks so far. I am still tweaking. these are redline retail pc4000
Hi, The have just climbed on these rams. The have had this problem... screened blue with reported error to psyche.sys
Mushkin Redline XP4000 2GB @240Mhz
3-3-2-8
Trcs 7
twtr2
2.7V
he can depend too low on the voltage?
3dmar2005 test ok
prime95 test ok
super_pi 32 mega ok
:(
TnX
trtw 3
2.8-2.9v
I got PC4000 OCZ's and they are doing 280 6-3-2-3 1T so far :) These Mushkins any better?
fyi - I just got mine the other day from Newegg. The heatspreaders on mine were defective, on one end of each set, the hs's were closed properly, so whenever you try and put a little pressure on the hs's to install your ram, the hs's would slide down off the memory chips, not allowing me to properly install the ram. I was forced to just remove them. Not sure if it's worth the effort to rma them since the sticks run fine. I haven't had a chance to oc them.Quote:
Originally Posted by perkam
i do the same with these on intel.Quote:
Originally Posted by IvanAndreevich
246x11 2.7GHTZ 1:1 3-3-2-8 2.7v dual spi stable on a neo 2. These work well with my setup and my cpu tops out at 2.7 so these are just what I was looking for. Thanks Dounger:)
CPU Z http://valid.x86-secret.com/show_oc?id=57681
sinister try and see if you can do 2.5,3,2 if you bump voltage to 2.8
will do thanks:)
I just got these stick I have them running at 275mhz 2-4-3-5 I love them great decision to buy, also my CPU is opteron148@2950mhz prime/stable.
nice results dave, wierd timings though
2.5-3-2-7 @2.7 2.75v (thanks sin)
http://valid.x86-secret.com/show_oc?id=57708
Will see if I can do 2.5-3-2-5 at 2.80
nice results, it looks liek the yields are starting to look good.Quote:
Originally Posted by sinister1st
Ok heres 2.5-3-2-5 1;1 2.8v dual spi 32 run
http://valid.x86-secret.com/show_oc?id=57713
10 multi later This stuff rocks.
I still don't see how these are that good. My Mushkin High Performance Blues with Infineon BE-5 do 258mhz @ 2.5-3-2-6 with 2.7volts. Thats SuperPI 32M and dual prime stable. I run them daily with my opty 170 at 255mhz 2.5-3-2-6 timings. The HTT is set to 280mhz with a 9/10 divider. My sticks only cost me $260.Quote:
Originally Posted by sinister1st
I want something reasonably priced that will run 3-3-3-8 @ 280mhz so I can run 1:1. Until that comes along in the $250 range then I'm gonna pass.
With BE-5 your not promised those timings and what you didi is prety rare.Quote:
Originally Posted by NinjaWreck
Sinister im glad it worked out for you.
Quote:
Originally Posted by NinjaWreck
Get the 991483 then. It is $219 at the egg and I know we are throwing in a $20 MIR this week too.
Duonger
270x10 3-3-2-8 1:1 dual spi.
To bad I have to rape my X2 with voltage to get it to 2.7 but at 2.6 it only needs 1.45 volts
Forgive me If I ran 3d mark wrong (im pretty sure I did it right) I never use it but I did game a while and had no problems.