没必要啊
A64的温度不高
水冷效果不大，除非电压能加到1.8v以上才过瘾
Printable View
没必要啊
A64的温度不高
水冷效果不大，除非电压能加到1.8v以上才过瘾
huh?Quote:
Originally Posted by joezxk
hey you guys.... i am thinking of buying the OCZ DDR booster, cuz i can't get my mem across 265mhz with this 2.85v.. or do you guys think it's the chipset?
Hmm was running 250*10 for a while but was'nt priming stable..
ive got 2 x 512 ballistix pc4000 ddr and atm running it at 2.70 ( in bios ) at 200 fsb.. but the thing ive noticed is that these ram modules get VERY hot??
anyone else notice this.. dont seem to remember my geil ram being so hot.
Not sure exact temp but i would say 70's-80's was red hot to touch.. maybe this is why i cant prime stable or anything at this speed ? even at 200 there red hot too..
i didn't buy the ocz yet... first want some better cooling for my chipset....
last night did some overclocking in the cold garden :D
with this as result :
http://www.geocities.com/kl00tzakje/2934.JPG
http://www.geocities.com/kl00tzakje/45.55.JPG
klootz whats your ram running at?
in the pifast score i used the 133mhz divider so my ram is doing 201 or 202 mhz, in the max overclock i put the divider on 100 mhz which made my ram do 163 mhzQuote:
Originally Posted by stelleg151
i can't get it higher... so i guess that is because my chipset gets too hot, if anyone has another idea... plz post it ;) i'd love to break 3 ghz :D
Hi
i get a 3200+ 0442 SPMW
what can you tell me about this stepping ?
sorry for asking :-(
Katrin
wow were you get it from? that is the newest week i have seen on this forum so far. what specs are you running?Quote:
Originally Posted by Katrin
Hi,
How about a 3500+ 0437 ?? Any good? I know a guy that is selling one of these, he says it gets 2500mhz@1.45v on air. Should i buy this cpu or should i get a new 3500+ ? The difference is 80€ give or take (about 100$).
Thx! :)
man the number of people that can get 2.8 stable is just unfair! i'm stuck at 2.6 on water still! i got that with my old winchester!! on AIR!! ok so i run less volts now but i cant get even 2.7 and it's making me mad! also i cant get my new 1gb bh-5 over 250fsb! i think it may be the northbridge since i can run that at 2-2-2-11 with less than 3.5V but no more even with 3.9V... vht mod here i come =/
0441..
1.66v 2700mhz.
so far so good.
0437 is rumored to be the worse of the bunch. Had 2 0437s and both kind of s****d at overclocking. Guess he got a very lucky one :D
Hi,
I think i'm gonna give it a try... I'm gonna hook it up on WC, probaby i won't get it any higher than 2.6Ghz stable.
MSI K8N Neo2
Winchester 3000+ (0437)
256 PC4500 Adata Vitesta (samsung TCCD)
Stock cooling
http://www.hot.ee/razor/2640mhz.jpg
yeah i have a brandnew stepping:D 0444XPEW
This is what I've reached with box cooling all around. Gotta get a 7700 cu soon :p:
The CPU can run 2750 without beeing able to run prime, and 2600 prime stable...
@plx:
What's the production week on that 3500+ ?
I really don't know yet... haven't got any cooling paste, so can't take off the cooler... I forgot to write down the stepping before assembling the rig :(
I will post stepping before the end of the week... 7700cu should be up and running then ;)
Btw: why asking ? :)
But I got it from the first sending that reached Denmark in the beginning of november...
I'm just checking production date's on 3500+ to get an idea which are the better ones, yours seems nice.
BTW, that 3500+ 0437 i talked about it's probably messed up, the owner told me that it probably has a bad memory controller... Probably gonna get a 3200+ coz 3500+ are hard to find these days here in Portugal...
Mine is a week 43...
note: a 7700cu does fit an Abit AV8 mobo, right?
Hey everyone, I am done OC'ing until I get my new PSU (ill explain why later)...here is my results:
3200 Winnie @ 1.6v , I don't know how to find week etc help?
320HTTx3LDT --> 8x multiplier (PSU can handle more) :banana:
Patriot XBL ($100 highly recomended for budget OC'ing)--->166 Divider (256 3-4-4-7 @ 2.9v but again varies due to PSU)
and of course MSI K8N Neo2 Trat modded 1.37 BIOS....
2560mhz on air with 50C load temps :) (35 or so idle).
Basically my PSU is getting overloaded (Antec Truepower 350W), and this doesn't allow me to add more fans, it won't increase my vcore or vdimm past 1.6/2.8 usually, and it prevents from decent overclocking on my 6800nu (no 16 pipes :( )
Screenies!
O yes and behold....my piece of :banana::banana::banana::banana: v-rails...just look at that how I am supposed to do ANYTHING with 3.22v on 3, 4.92on 5, and 11.66 on 12v WTF! Im getting an xconnect in about two weeks and then doing a case mod with two high CFM fans (one blowing right at my smartfan, and another as an exhuast, it should lower the temp to about 45 degrees or so I am hoping. I will also try and decrease my vcore and see how stable it is :).
O yes, One more thing,what would be best running 256 with 3-4-4-7 timings and 320HTT with the 166 divider or soemthing else? I just got the whole setup 2 days ago, and day 1 was installing everything :p. Please give suggestions to keep current settings or soemthing else....
from www.mindfactory.de for a week.Quote:
Originally Posted by DevilsRejection
the problem is, that i dont still have a nf4 board. therefore i can not test the cpu... :-(
Katrin
buy an NF3 board;)
Quote:
Originally Posted by FX Freak
ok, but i have an x800xt pci-e @home...
Kati