sick sticks man :X
sick sticks man :X
If all goes to plan this board will be here tomorrow. :) Let's see if it will clock my Trident-X to 1400 10-12-12. The rams did this twice on my MVG and will only do it again if the board has it's day. Letīs hope this board will be better.
should be no problem dude :)
What kit of ram would you guys recommend for 8GB at 2133? I want to upgrade from my 1600 Ripjaws, but there doesn't seem to be many kits at that spec listed on the supported ram list for this board so I'm not sure what the safe bet would be.
Z77 OC Formula beta Bios update to 1.42g . improved bclk training , windows8 support , trrd trtp twtr can be lower to 1 now
http://picx.xfastest.com/nickshih/asrock/Z77OCF142g.rar
Z77 OC Formula Tools . Formula drive 0.2.13 , Rapid OC 1.0.16 , Timing Configurator 1.0.10 trrd trtp twtr can be lower to 1 now
http://picx.xfastest.com/nickshih/as...latool1019.rar
Could you bring something into the afd to oc gpu's? Something special, that can raise voltages over 1,381VGPU @ 7970's like trixx or afterburner?
Quote:
Originally Posted by emertX
The problem is .....we dont have VGA card business -.-" I cant get the datasheet ....
Nick, is there a way to have the power and reset onboard buttons to stay lit once the board booted? Mine go off after boot. Already found out how to get the diagnostic display to stay on after boot.
I have to say i'm still on stock bios P1.00, can't find any memoryprofiles in this bios either. Are there any in this bios or do i have to flash?
So far i really like the board but i have to get used to bios and it's typical sounds. :)
Quote:
Originally Posted by Zeus
Z77 OC Formula beta Bios update to 1.42g . improved bclk training , windows8 support , trrd trtp twtr can be lower to 1 now
http://picx.xfastest.com/nickshih/asrock/Z77OCF142g.rar
Z77 OC Formula Tools . Formula drive 0.2.13 , Rapid OC 1.0.16 , Timing Configurator 1.0.10 trrd trtp twtr can be lower to 1 now
http://picx.xfastest.com/nickshih/as...latool1019.rar
Is the problem with Vcore solved in this beta bios ? (had to increase Vcore when migrating from 1.15G to 1.42A)Quote:
Originally Posted by nickshih
Moreover, is this kit compatible with the motherboard : G.Skill RipJawsZ DIMM Kit 32GB PC3-14900U CL10-11-10-30 (DDR3-1866) (F3-14900CL10Q-32GBZL) ? I have not found them in the memory support list but this list may not be upadated.
Quote:
Originally Posted by overclock
vcore issue should be solved . and memory is no problem
OK, thank you.
anyone tested these right now?
http://geizhals.de/847539
Flashed that latest bios and tried some.
http://i.imgur.com/XdPx2.jpg
Don't know if it's just plain luck and the sticks had a good day or that this board really is that good but i managed to run 32M at 2800 10-12-12-25 again.
Finally found out how to turn off the sound effects, the sound you hear when entering bios scared the cr@p out of me, lol. Also have the power and reset button illuminated now.
Looks like i'm getting the hang of this board by now.
Oh, btw, the board seem to be pretty awesome at 3D marks as well. :)
http://www.xtremesystems.org/forums/...a&daysprune=14Quote:
Originally Posted by emertX
Hynix chips. ;)
Is that good or not?
bios here gives me file corrupted when I open winrar
try downloading again, working here
I canīt use psc memīs at the same mhz with new bios have trobles to run 2600 divider on psc... bbse are good!
The 1.42G bios is as stable as the 1.15G : same frequency reached with the same Vcore.
This board have power, full air!! :P
http://imageshack.us/a/img62/3755/6m18s375.jpg
Your 3770K is awesome : what is its batch ?
3218b960Quote:
Originally Posted by overclock
This cpu was been sold today here on xs!
Same here with repeated tries and with different browsers, strangely seems to extract fine though.Quote:
Originally Posted by Darknight
What a pity : it will be difficult to find a better CPU. Did you buy it recently ? If it is the case, I will try to find the same batch.Quote:
Originally Posted by Billy-The-Kid