Bad news for you- you have to depend on your luck- one of the two single sticks I bought was black, the other one green- good news is they worked perfectly together:D- 1134 Cl8-8-8-24@ 1,65VQuote:
Originally Posted by andressergio
Printable View
Bad news for you- you have to depend on your luck- one of the two single sticks I bought was black, the other one green- good news is they worked perfectly together:D- 1134 Cl8-8-8-24@ 1,65VQuote:
Originally Posted by andressergio
no worries i bought 2 black PCB ;) one for me and for my mate perfect same as my 2x2 KIT not there tough :)Quote:
Originally Posted by websmile
Just received my replacement WX200UX6G7 kit from RMA. Haven't decided if I'll keep it or not.
I'm afraid to hear what happened to the first kit :eek:Quote:
Originally Posted by Shiranui Gen-An
Few days ago, i recieved 3 dimms supertalent 2133c8.
What i would expecting to do? Thanks..:D
1077 7-7-7 1.7x volts ...
Could it be possible something like, 1050 7-7-7 with an 920 (210 bckl) and everything on air, stable at spi 32M?
Sorry for the "noobish" question but i need some encourage before starting tests...:D
Very bold plan, General Custer:D- I hope this doen´t end up in desaster:rofl:Quote:
Originally Posted by Hondacity
Depends on your board, the IMC and particularly on the quality of the sticks, means luck- if you are lucky 1050 could run at less than 1,8V, tests will show- good luck for that:up:Quote:
Originally Posted by geobot24
some off topic question...does have this Super Talent kit Hyper IC's? http://www.superbiiz.com/detail.php?...oLSper0v8z1cN6 thanks for answers:)
99.9999% hyper MGH-E's:up:Quote:
Originally Posted by Blue Storm
At first tests, my 3x2gb 2133c8 can do spi32m 2000mhz 8-8-8-24 with 1.65 vmemQuote:
Originally Posted by websmile
and +200vtt at classified 760 (bios 74).
I dont know if this is something promicious, but i want more tight timings...:p:
In my experience STT sticks need a lot of VDIMM for 2000 C7, like 1.70V+. Something like 2100 C7 is gonna take a crazy amount...
thanks very much:up:so instead of Corsair Dominator GT 2000MHz 8-9-8-24, I will take these Super Talent:yepp:Quote:
Originally Posted by radaja
I'm trying to get my hands on a Phenom II 1090T so I can test 2000 C7 on these 2000C7 sticks.Quote:
Originally Posted by Shiranui Gen-An
I've gotten 1880 6-6-6-15 validated through CPU-Z @ 1.75v...
:clap: VERY NICE i ORDERED SOME OF THOS ALSO...Quote:
Originally Posted by BeepBeep2
Wouldn´t be so sure about that- maybe you just had bad luck- my 1000 C7 need a lot less V than the 2200 C8 and the 2133 C8 I had at 2000 Cas7- here´s an example, just picked two of my sticks and tried it, these are not my best ones;)- and my board is not known for being a good C7 clocker, its much better at C8 and 9- for comparison, I had two 2GB sticks kingston here a few weeks ago, they needed 1,7V with higher TRFC and lots of tuningQuote:
Originally Posted by Shiranui Gen-An
http://www.abload.de/thumb/2000c7-7-...63vl11f5h6.jpg
i was wondering, and choosing a new set of RAM for my EP45T-USB3P, i need ot know which of the linked models have elpida hypers and how i would know for future purchases what have hypers and don't.(also which is the better buy)
is it the UX in the model number that determines its an elpida hyper?
link 1 http://www.superbiiz.com/detail.php?...nel-Memory-Kit
link 2 http://www.superbiiz.com/detail.php?...nel-Memory-kit
link 3 https://www.superbiiz.com/detail.php...nel-Memory-Kit
all of the ones you posted are hypers
all supertalent 2000+ with timings of 7-7-7 or 8-8-8 are 100% hypers
Feels good to finally use mine after owning them for months. Very, very limited on time so have not tested as much as I would like to yet but so
far I have gotten 7-7-7-20 @ 1700 with 1.66
very nice my friend :up:Quote:
Originally Posted by NoGuru
i order myself a EP45T-USB3P by gigabyte and The VERY last NO MORE in stock BLACK pcb Super Talent DDR3-2200 4GB(2X2G) CL8 Dual Channel Memory kit - WS220UX4G8
410$$ for the whole deal they even discounted me the motherboard =D VERY VERY HAPPY will tell you my results im going for a 1600-6-6-6-18 ill tell you how low voltage it stablizes out at =D!
They came in but i have no time for testing :( but i had to brag, i pulled the heat spreaders up gently looking in and there ELPIDA MGH-E =D, ALSO Black PCB
2200 2GBx2 Cas8 8-8-8-24
Sorry about quality used old webcam but shows my beauties!
http://img576.imageshack.us/img576/2...2220127761.jpg
Surprised i could get a good shot this close
http://img258.imageshack.us/img258/6...2220229511.jpg
should have results when im done mounting the Heatsink on the new DDR3 mobo, soon!
Hey websmile, nice job, did you try triple channel with your best chips?Quote:
Originally Posted by websmile
I was reading this thread and DDR3 24/7 list thread and decided to buy 2000 C7, what can I expect from them (in best and worst case scenario)? Are they (overall) better than my GT's?
Fresh out of the box so far
http://img218.imageshack.us/img218/9595/dsc034280.jpg
They might be a little bit better than the 1866C7 GTs, but the STT 2000 C7 kit I have isn't anywhere near as good as my 2000C8 GTs.
Actually mine 2200 C8 was much better than my GT 2000 C8, and 2000 C7 are supposed to be better than 2200C8 , but I think its a matter of luck.Quote:
Originally Posted by Shiranui Gen-An