CryoStar Sli and CPU evaporators by Gosmeyer

Printable View

Show 100 post(s) from this thread on one page

08-08-2007, 01:52 AM
LardArse

Quote:

Originally Posted by runmc

Please feel free to post the build in this thread.:up: I hope things go well with you - thanks

I'm glad you are happy Lardy. thank you :D

Thanks to the Cryo Evaps, I don't have to fumble with 3 containers :D
SLI Cryo Evaps

http://resources.vr-zone.com/Shamino/ben1.jpg

With QX6850 @ 5.13G and the cards nicely chilled by Cryos, got a nice score!

http://resources.vr-zone.com/Shamino/25792a.jpg

Look at the paper towels, if I don't bench cards fast enough, the rams get all frosted up, in my humidity.
08-08-2007, 02:00 AM
dinos22

wow almost a world record run there :up:
08-08-2007, 03:52 AM
Fr3ak

Quote:

Originally Posted by LardArse

Thanks to the Cryo Evaps, I don't have to fumble with 3 containers :D
SLI Cryo Evaps

http://resources.vr-zone.com/Shamino/ben1.jpg

With QX6850 @ 5.13G and the cards nicely chilled by Cryos, got a nice score!

http://resources.vr-zone.com/Shamino/25792a.jpg

Look at the paper towels, if I don't bench cards fast enough, the rams get all frosted up, in my humidity.

Wow very nice Shamino :)

.
08-08-2007, 04:16 AM
Moc

Hey,
Die Cyrostars sind in Rons Shop auf www.under-the-ice.com erhältlich.
Zu zwei stück kommen aber noch ca. 60€ beim Zoll.
Falls du weitere Fragen hast, Toaster hat sich zwei Stück importieren lassen. Schreib ihm doch einfach eine PN.
Er hat ungefähr 1 1/2 Wochen gewartet.
Sry for the german post :shrug: :yepp: ... so much easier for me :D
08-08-2007, 05:02 AM
Fhqwhgads6680

Ich habe fur vier Jahre im Deutschlan geleben, vieliecht (spelling?) Zehn Kilometer von Kaiserslautern und einhundert sud west von Frankfurt. Mein deutsch aber ist jetzt sehr schelcht, und ich kann nicht die umlaut auf meine keyboard finden.

ok thats my best lol, my german got really bad I've been back for six years now.. couldn't resist sorry for the OT. Can't wait till I get my cryo! I have a can of 410a on the way I am going to put this thing to the test on a quad ;)
08-08-2007, 10:40 AM
teyber

Mach Chnell!
08-09-2007, 12:16 PM
[XC] 2long4u

Quote:

Originally Posted by Moc

Hey,
Die Cyrostars sind in Rons Shop auf www.under-the-ice.com erhältlich.
Zu zwei stück kommen aber noch ca. 60€ beim Zoll.
Falls du weitere Fragen hast, Toaster hat sich zwei Stück importieren lassen. Schreib ihm doch einfach eine PN.
Er hat ungefähr 1 1/2 Wochen gewartet.
Sry for the german post :shrug: :yepp: ... so much easier for me :D

Er, what?:confused: :confused:
08-09-2007, 04:32 PM
teyber

seriously. THe only german iknow is mack shnell, which means move faster and i learned that from watching ww-2 movies :D
08-17-2007, 11:08 AM
LittleDevil

I have one question, what do you get beside evap, is it backplate and mounting screws too and some issulation, because i didn't see that on any picture?

@toaster: Did you already test evaps?

regards
08-17-2007, 11:46 AM
BeardyMan

These evaps are fantastic, so small and yet very efective!

great work!!;)
08-17-2007, 12:22 PM
toaster

Quote:

Originally Posted by LittleDevil

I have one question, what do you get beside evap, is it backplate and mounting screws too and some issulation, because i didn't see that on any picture?

@toaster: Did you already test evaps?

regards

no, my rotary and the aevs are not here. :shrug:
i hope i get it next week ;)

but now i build a rotary cascade for cpu :)
08-17-2007, 01:05 PM
Pete

Is anyone bar the guys behind these going to have a working system with one any time soon?

Can we get LD to have one, he'd have a unit done in hours if we let him!

Kinda sad as im torn to what evap i go and get
08-17-2007, 01:54 PM
runmc

Shamino/Lardarse is using them now.;)
08-17-2007, 02:00 PM
PhilippF

Quote:

Originally Posted by teyber

seriously. THe only german iknow is mack shnell, which means move faster and i learned that from watching ww-2 movies :D

It´s actually "Mach schnell"... :)
08-22-2007, 08:39 AM
runmc

2 Attachment(s)

8800gts

This is the Cryostar mounted on GTS. Very easy install :up: This is mounted to the 5.5 Danfoss compressor I showed earlier in this thread. I'll redo heatsinks on the card tonight if I get time.
08-22-2007, 09:00 AM
n00b 0f l337

Very very nice Ron!
Clean and well done. Not going to bag the card like usual?
08-22-2007, 09:26 AM
runmc

1 Attachment(s)

Quote:

Originally Posted by n00b 0f l337

Not going to bag the card like usual?

Well I wasn't going to bag it because the resistor for GPU core mod is soooo little, I just know I would melt it off the card. But once I get started I can't stop.

BTW - lip added to enclosure by popular demand. :ROTF:
08-22-2007, 09:41 AM
Fhqwhgads6680

I recognize that gts ;) give her a good run for her money, I didn't have it long but seemed to clock well..

anyword when my cryo is coming in? I have a virgin can of 507 and the best system I have made just waiting for it... :D
08-22-2007, 09:48 AM
n00b 0f l337

Ooo any pics without the insulation donut Ron?
Is it enough for heatshrink to grab?
08-22-2007, 09:48 AM
[486]

Quote:

Originally Posted by gosmeyer

Bottom of the cap is not ridged. In fact, very flat and parallel within .002". You will always have tool marks (area that the tool just traveled across) on all machined surfaces. Only the finishing process will remove them if needed (not needed in this case) as there is a .010" gap between bottom of cap and top of evap. that flows.

[picture]

That's why I didn't blast the bottom of the caps, It's covered by solder:up:

if the shop that machines those has a shaper you should use it to cut everything flat, then use the CNC to cut the channels, the shaper bits are about 90 cents, while the mill bits are 5-20$, and the shaper can be run somewhat unattended, some have adjustible stops to turn it off at the end of the cut, and they also leave a surface almost like ground on a surface grinder, if set up properly, and it would cost less for time on that, rather than the CNC, metal planers are pretty much the same

your evaps look great!, and look like they have plenty of surface area!
08-22-2007, 01:48 PM
gosmeyer

I just saw cut, face one side, flip and finish mill. Chick vise machined to clamp six at a time. One machine, one setup, one person.
Cycle start-walk away-come back-six finished machined pcs.
$5.00 per hr for 1 hr is the same as $10.00 per hour for 30 min.
08-22-2007, 08:49 PM
kayl

nice work their runmc, what sort of sized screws do you use to mount with, they must be smaller than 3mm threads
08-22-2007, 09:03 PM
PhilippF

How warm does the RAM get? Does the Evap cool it through the PCB enough? Very nice Setup, so tidy mounted :)
08-23-2007, 02:32 AM
runmc

Quote:

Originally Posted by Fhqwhgads6680

I recognize that gts ;) give her a good run for her money, I didn't have it long but seemed to clock well..
anyword when my cryo is coming in? I have a virgin can of 507 and the best system I have made just waiting for it... :D

I am really enjoying the gts. Enclosure is here. :up:

Quote:

Originally Posted by n00b 0f l337

Ooo any pics without the insulation donut Ron?
Is it enough for heatshrink to grab?

Tape yes, heatsink probably no. Eric might add a bit more lip next run if we ask him nicely. :)

Quote:

Originally Posted by kayl

nice work their runmc, what sort of sized screws do you use to mount with, they must be smaller than 3mm threads

I drill the mounting holes in the card out a very small amount:shocked: I wouldn't want to suggest this to anyone and then have them kill a card.:shakes: I used #4 threaded rods which were just slightly bigger than the original card holes. I didn't drill out much at all.

Quote:

Originally Posted by PhilippF

How warm does the RAM get? Does the Evap cool it through the PCB enough? Very nice Setup, so tidy mounted :)

Evap does cool the ram nicely :up:
08-23-2007, 04:05 AM
gosmeyer

It is a nice looking sanitary setup.
With the ultra low noise level and capability it has you might just have a premier GPU SS:yepp: .
Might be able to run it without even turning the fan on. Zero noise:shocked:

Show 100 post(s) from this thread on one page