Quote:
Originally Posted by njkid32
jeeewiz....you guys are running 3.4 under phase and your result made my 3.0 on air looks like child play, my PCICE single stage is sitting in the corner giving me a smirk :stick:
Printable View
Quote:
Originally Posted by njkid32
jeeewiz....you guys are running 3.4 under phase and your result made my 3.0 on air looks like child play, my PCICE single stage is sitting in the corner giving me a smirk :stick:
@Ben805 i have bought a WC to get higher than 3Gig on good Temps. Next week the
WC System will bei completed. And than i will go for 3,2Gig Primestable or more.
And the CABNE is the best CPU i´ve ever had. Not much Vcore but a plenty of clocks.
It's really funny how these optys really changed how we now look at oc's.Quote:
Originally Posted by ben805
BO(before opty) and AO(after opty).
BO if you had a cpu that would hit 2800-2900 it was above average.
AO if your cpu doesn't hit 3000 it's below average.
BO on single phase 3000-3200(non-FX) was pretty good.
AO on single phase 3400(non-FX) is starting to be comon.
This cpu really raised the bar.
screenshot of my 2.9, hey at least i found the way to only campture the part of the screen i want. still aint installed PS to resize so i can directly post into the thread the way i want to.... bu it dont matter anyhoo i spose.
http://img454.imageshack.us/img454/1...ehot7nb.th.png
Have you tried messing with DQS?Quote:
Originally Posted by njkid32
I thought I should be able to get Prime stable at between 3.2 and 3.3ghz. I ran off 3.3ghz "large FFT" and did over two hours on it. But its just too boring. I had to stop it. Here it is for what its worth.
http://img422.imageshack.us/img422/5...eend3ty.th.png
I am in the 3GHz club on air! Not stable (yet), and running on a divider... All this on my pos Neo2.
yea i can get to windows at 315x10..... wont even bother trying to stabilize that heh.... so im stayin at 2.9 it seems. and you know what? thats fine with me, my winnie took me to 295x9 and this is now a nice speed bump, and fun.... and hot.
I'm perfectly OK with 2.9, but if I can get to 3 w/out much effort, why not? I am having an issue with my Neo2 only allowing me 2t on the mem. I thought it was the mem controller on my 3200+, but the Opty does it too. I am convinced it is the crap Neo2 and that I have slightly scorched something using the ddr booster (not currently using it). Could I just have bad luck with processor mem controllers? I don't think a brand spanking new Opty would have such a hard time with 1t...
Got all three of my benching sets of memory to 3.4ghz with the 148. Last one to get a chance was the BH-5.
http://img382.imageshack.us/img382/4...1bh52nd5ex.png
Beautiful results :slobber:
Quote:
Originally Posted by dogsx2
yea I know....seems like only the CABNE and some CABYE can hit the magic number, though I'm wondering how well these opty's memory controller going to hold up with all the abuse we're throwing at them, I sure hope they built like tank and last for a little while :D :D
Quote:
Originally Posted by gundamit
2hr of prime at 3.3Ghz is impressived!! thanks for running it and if you can do higher...like 3.35~3.4, please post the result whenever you have a chance as well :D :D
Looks like i started something with the image thing. In the interest of lighting a candle I started a thread on image resizing and free image progs.
http://www.xtremesystems.org/forums/...83#post1099083
The short version of it is download the image viewer from here http://www.faststone.org/. It doesn't seem to have spyware or vir's but use at your own risk. It's pretty cool and you can save as lots of different file types and all that. Saving as a 256 color gif or png seems to give good results and small size or just save as jpeg and lower the quality slider under save as-advanced .
I actually like the pics in the forum better than thumbs or links but just not so huge and at too high color so they take all day to dl.
Quote:
Originally Posted by gbomb944
thank you kind sir, exactly what i was lookin for!
Well i wouldnt hold my breath, prime95 stable with just watercooling for 3.2ghz just aint going to happen. Now if you chill the water than that a different thing.Quote:
Originally Posted by Rufus7
So are you going to chill your water? id be amazed if your chip could do 3.2Ghz prime95 stable with normal water.
I dont see why. Peoples chips do 3.1 on air... Whats another 100mhz on water.
Quote:
Originally Posted by mongoled
Here is a prime run at 3.3ghz. Its only an hour and could have kept going but didnt want to wait anymore. Jeez I even hate waiting for a 32m run. LOL Anyway ram needs tightening up and fine tuning but here is it...
http://img312.imageshack.us/img312/3599/32ot1.th.jpg
Alot, 100mhz after 3.1 is a bunch if your on regular water. I agree with mongoled.Quote:
Originally Posted by Fallengod
You may be able to ss or 1-8m but I wouldn't bet the farm on 32m at 3.2 on reg water.
No i wont chill my water for the first. I want to see how high the chip is going under normal watertemps. Later i will try to chill the water a little bit, but not too much.Quote:
Originally Posted by mongoled
Have been offered this stepping
Opteron 146 cabye 0536 gpmw.
Is this much better than my CABGE?
mbm look here if you want to see how high the Steppings goes.
http://www.forumdeluxx.de/forum/showthread.php?t=162502
Like dogsx2 said,Quote:
Originally Posted by Fallengod
the peeps doing 3.1ghz on air are doing just screen shots, I aint seen no 3.1Ghz screen shots of prime95 on air, have you?? These chips once they go past 3Ghz, need alot more cooling then below 3ghz. Id be very impressed if a saw a 3.1ghz prime95 stable chip on normal water, nevermind 3.2Ghz, then I would be :slobber: and cursing the person who had it!@! LOL
:D
Good luck with tht chip Rufus, from your air results it sure shows alot of promise
Heres one Screenshot on Air with my APMW at 3050Mhz on Air. And one who failed at 3100Mhz on Air.
http://img368.imageshack.us/img368/9...me4h4vr.th.jpg
http://img368.imageshack.us/img368/4...me4h0sz.th.jpg
I can do a 1m superpi on air easy 3.1ghz. You must have missed my post, its more than just a screenie. IF I put another fan onto my heatsink to replace my 59CFM 20DB panaflo I can do 32m most likely.Quote:
Originally Posted by mongoled
IF I pop the heatspreader I have no doubts at all that I will be 3.1-3.2ghz prime stable on air. Gotta see whether its worth doing though, especiually when I have phase change coming. Dont want to wreck what seems to be the 2nd best opteron on air out there.
Please do this, rather than talking abt it!!!! SuperPi 1M is easy peasy. Also suggesting tht it is 'likely' u can do 32M is again not good enuff, we dont do 'likely' here, SS and verification is where its at.Quote:
Originally Posted by computerpro3
You seem very confident tht you will do 3.1-3.2Ghz prime stable on air, 100mhz difference is alot when talking abt prime95 stability! Please make my comments look silly and jealous by showing me a prime95 screen shot at 3.1Ghz on air......
i can just see you living in the north pole in your igloo at - 30C posting a prime95 screenshot at 3.3ghz, LOL
:rofl:
Does this count as prime stable on air?http://img473.imageshack.us/img473/6...estable4uq.pngQuote:
Originally Posted by mongoled
No IHS, but I later realized when working on a 144 CABYE that the Windows was corrupt. Also on a nF3; my nF4 Ultra-D comes this week at which time I'll give 3.15 a serious go.
With the Opterons it seems it's 1M MHz minus 100-120MHz that's P95/OCCT stable.
Going from decent air to good watercooling only gains 50-80MHz. So if you're 1M stable at 3.1GHz right now, add 50MHz for the slightly better cooling and removing the IHS and then subract 110MHz for the P95/OCCT stable and you get 3.04GHz most likely.
No way you'll get 3.1 stable even on good water if it can 'only' do 1M @ 3.1GHz right now.
And (insert crazy long name here), yes that counts as Prime stable but not 3.1GHz ;)
And what kind of aircooling do you have? 30C idle temps are about 8C lower than I get with water :stick:
Magic air cooling? In seriousness, I use a XP-90. Ambient is around 19C, and my case is open.Quote:
Originally Posted by Vapor
I'd agree with that, it seems to be the way my chip reacts too.Quote:
Originally Posted by Vapor
Thts a good rough analysis on how these chips will clock,Quote:
Originally Posted by Vapor
as for the ambient temperatures, they are very low, looks like we will be going back to the discussion if air-con units strapped into case count as 'air-cooling'
Anyone got a butchers freezer near them, take your system in their, with your 'air-cooling' and get a prime95 stable scrren shot at 3.7Ghz
:D :D
tht would be air cooling right, LOL
hehehehehee
Nope, 3.1 is 3.1. On my 148 the last 30MHz comes hard. This isn't hand grenades ads or horseshoes. :DQuote:
Originally Posted by ixtapalapaquetl
:slobber: :slobber:Quote:
Originally Posted by ixtapalapaquetl
You got XP-90 and 30C idle temps with 1.6v :eek: , wht are your load temps, you got a freeking different CPU to the rest of us!!!
-EDIT-
Offtopic question, just noticed tht ixta... is on a nForce3 mthbrd, whts the voltage regulation like on those boards, better than the NF4's??
I don't know if you had a 9c ambient you could do 30c idle. :stick:Quote:
Originally Posted by mongoled
Yes possibly, with 9C but he has 19C ambient. Im on water cooling with 1.57v (multimeter) IHS removed and im idling at 30-33C right now, ambient temps id say are 19C.Quote:
Originally Posted by dogsx2
That is the million dollar question. I have always assumed that it is worse. I am getting a nF4 Ultra-D later this week, so I will have some interesting comparisons soon. Much more important than +/- 50MHz, however, will be my newfound ability to run my FF's at 1T!!! Now THAT'S going to make me happy!Quote:
Originally Posted by mongoled
@dogsx2: yeah, that last 34MHz is quite a hill to climb! We'll see...
148 running at 3.06Ghz @1.60v 30'C on air??? wow.....what kind of "air" you got there? can you get me some too? :D :D not only the cpu, but your chipset running at 1.6v and only 32'C and LDT voltage at almost 1.9v but pwmic only at 33'C!! interesting....still very nice clock and nice temperature though.
No for 30°C Idle its enough around 15°C Ambient with an XP90 and 1,376vcore.Quote:
Originally Posted by dogsx2
But 1,6Vcore its very hard with the IHS still on.
That's exactly our point....Quote:
Originally Posted by Rufus7
I think this might be the max on this CABYE 148 on air. The 146 and this 148 are sure close on max. I might be able to squee alittle more out of them. If only I had ixtapalapaquetl cooling, I know I could. :D
If you see anything in the 148 tweaker that will make it better, I'll sure try it.
http://img405.imageshack.us/img405/4...70vx1cc.th.jpg
Here's the 146:
http://img405.imageshack.us/img405/1...30705ot.th.jpg
Gun, here's the top HTT on this new mb:
http://img405.imageshack.us/img405/744/1484029ri.th.jpg
I forgot to reset the tweaker, sorry.
I have TT BT and I get 28C idle with 1.6V .. loaded 47C max...Quote:
Originally Posted by mongoled
With 1.55V idle = 28C ... Load = 44C max
With default V's = 26C idle and 39-40 load...
This is on MSI k8n neo2 plat blabla :p..
I have both, it must be kinda cool this time of year Somewhere in Hollanda. :) Do you live by ixtapalapaquetl?Quote:
Originally Posted by F|apDro|`
Assuming thats UTT then trfc 14 (12 if BH-5), preamble 6-6.5ns, MAL 7/8Quote:
Originally Posted by dogsx2
And trrd to 0 and trtw to 1.....good luck with those though ;)
Might want to also experiment with tref.
chilled air. can't argue with that :DQuote:
Originally Posted by mongoled
There isnt the Batch numbers!Quote:
Originally Posted by Rufus7
Cant se if its CABNE CAYNE or CABGE
Who is saing that the cabye do not rock :D
Water cooled IHS OFF
3200mhz Spi 1M 25,813 sek
3150mhz Spi 32M 23m12,047sek
3180mhz 3D05/03
http://service.futuremark.com/compare?3dm05=1354938
what sort of water cooling do you have....Congrats....that is certainly a very very nice chipQuote:
Originally Posted by t-max
Nice chip. I think the 148's are pretty good with any stepping. I have seen any bad 148's yet.The 144's get ALL the junk that doesn't cut it for the higher speeds.Quote:
Originally Posted by t-max
Can anybody loan me a few MHz?Quote:
Originally Posted by dogsx2
http://img489.imageshack.us/img489/6...98prime1pt.png
Man, I was all set to just sit here contentedly until my new board showed up, but y'all had to be droppin gauntlets and sh*t! LOL. Dunno what happened. Took this 148 out two days ago to play with a 144, now my 148 is going higher and at lest voltage! Yes, I live in the ghetto so no, my apartment doesn't have any heating (and probably won't for another month - f'in cheapa** slumlords - but I digress), but this is still on air with ambient 18C. Speedfan shows lower temps than MBM. Also included a pic of Vcore - do nF4's rock more stably? Sorry about the myopic image. Don't have time to resize... will give 3.12GHz a shot next.
Does anyone have any info on the new Opteron 150's with the 2.4ghz clock speed? http://www.komplett.co.uk/k/ki.asp?sku=313933&cks=NWP
They're going to be available for a decent price apparently, and with all the decent 144's and 146's all but gone over here, i'm interested to know how they'd clock. :)
Could be colder here ... like 15C outside but on my room 20-21C ...Quote:
Originally Posted by dogsx2
But yeah my temp sensors suck on the MSI :stick:
Swiftech STORM cpu head 2 x gtx in the loop and a trible radi.Quote:
Originally Posted by dinos22
Very nice. Amazing amount of volts through a CPU cooled with water. IHS removal a little more tempting. :thumbsup:Quote:
Originally Posted by t-max
Hi,
I have just received 60 Opteron 144 CABNE 0540 APMW !
First look, not very good for CABNE : 2.85 GHz @ 1.6V stable with my WC.
However, CABNE are special about RAM setting, I will test later !
Now, I make dispatch and logistic.
Damn, www.komplett.no had 2 OPTERONS 150's and those were the only OPTERONS s939 available here in norway. I hope these OPTERONS get available soon.
I have a question, is it possible taht the OPT 170 has 2 cores which are same stepping like the FX-57? In other words it's a dualcore FX-57, that would be fun.
PS.
My english sucks..
looks like aggressive speed binning has started to occurQuote:
Originally Posted by computersmsa
Quote:
Originally Posted by computersmsa
dispached !
http://users.skynet.be/pt1t/144/CABNE_0540.jpg :toast:
OUch. Looks like the later weeks of 146 suck. If you look on the db the top ones are 0530's and the clocks get lower as they go up in weeks. It's a small sample but weeks/vs clocks there seems to be a direct relation.
http://www.webspace-giant.com/thegame84/Opteron146.htm
Maybe those 0540's will do better.
I wonder if amd can test these before they put the pins on? Maybe the good ones get turned in to 940 pins for the most part as they are more serious use. 2.8 is not bad but nothing to write home about either.
That always seems to be the general pattern with new releases. Initial weeks look good then it drops off some. Then everyone waits around until another "good" week comes along. I'm just wondering if dollar for dollar the average Operton will continue to represent better value than its Venice/San Diego counterparts.Quote:
Originally Posted by gbomb944
Year it can take a ton of v.core with the IHS off and still stay cool, it was like burning under the IHS reaching 60C load at only 1,6 v.core :mad:Quote:
Originally Posted by gundamit
tok off the IHS and now i can run even 1.75 v.core still keep it under 55 C :woot:
SO TEMPTING!Quote:
Originally Posted by t-max
And so dangerous.. What if you f**k up? there goes 220$ :(Quote:
Originally Posted by t-max
But shurely I will try it also. Hmm
What's the stat on the "kill rate" from doing this?
Black Ice Extrem II is on the way to me. This week i will get some results with the new WC System.
I'm diggin the first 4 numbers of the serial numbers of the new 0540APMW's ;)
Can't wait for results from them.....and their higher binned counterparts if they exist.
Anyone got ahold of a Opty 180 yet?
Nope....175s and down have been all that's available thus far.
Allright, ordered a 0540APMW to be a guinea pig - now to get some ram :D
well the monarch 146 is 0536gpmw. Too bad I don't have a board.
Wich bios and setting do you council me for a CABNE (0540 APMW) and 2*512 Mb of UTT BH-5 (CMSAM) ?
Thx :toast:
I'd say 510-2, which gave me the best results running both Winchester, Venice and SD. Used both TCCD and old BH5, though I have yet to play with an opteron.
*wink, low batch number computersmsa :D
Quote:
Originally Posted by Pt1t
Holy $h*T your chip is leet! Look at the first four numbers. 1337
What does that mean?Quote:
Originally Posted by gbomb944
^^ Leet... elite ... like 1337 H4x0r.
Probably nothing as far as oc. leet or 1337 is h4XXor for elite or cool.
http://www.google.com/search?client=...utf-8&oe=utf-8
I honstly think leetspeak is pretty silly but to each his own or is that pwn?
CABNE 0540 APMW ...1207.
I m still testing it , 32M passed @ 3ghz , 1.64v
1M passed 3031mhz , 1.67v under watercooling
but i think , this cpu can take more vcore ...
http://users.skynet.be/pt1t/144/3031_1,67v.PNG
Damn I think ewiz messed up my order.. it says RMA under order status? Why would it say that.. I haven't even had the chip yet.
Anyway do you guys know where there are any good steppings for sale.. I think I'll cancel this one from ewiz because they are seriously pissing me off, they have no more stock and I bet they gave my damn chip away..
those new CABNE's just look like the CABYE if I see those result :stick: ( at least when I look at my 148 CABYE )
Great, I hope mine performs similairly well! Did you get yours from computersmsa?Quote:
Originally Posted by Pt1t
yepQuote:
Originally Posted by perry_78
Fresh of the FedEx truck from Monarch Computer...
Should I be going :banana: :banana: :banana: 's
Looking back through the thread it seems most people are running MAL of 8-9, and preamble of 6.5-7.5 at 3.0ghz. Do you guys have that set in bios, or do you change it after booting into windows with a64 tweaker? Anything above 7.5 MAL blue screens on me before getting to windows. I have tried changing it with a64 tweaker, but it freezes on me. I have 3.0ghz sort of stable. 1m, 4m 8m pi pass, but fail 32m about half way through. Thinking that this may be why. Thanks.
Setup:
Opteron 146 CABYE 0536 GPMW Retail, from Monarch
Oh forgot cooling, was done on cheapo Tt Venus12 really well lapped
DFI nf4 SLI-DR, 510-2ModFix BIOS
OCZ PC3200 Rev2 TCC5 2x512MB RAM
OCZ PowerStream 520W
for rest look at sig
Windows XP Pro x64 (64-bit)
http://www.xtremesystems.org/forums/...id=39046&stc=1
THIS IS WITHOUT IHS, I FOUND OUT THAT THERE WAS HORRIBLE CONTACT BETWEEN IHS AND CPU CORE, max spi1m along with spi8m before was 2.95GHz with same settings, AND THIS CHIP RUNS HOT LIKE S*IT, was 62C loaded before, don't know how much now after taking off IHS :D I'll keep you updated
EDIT: Hmmm, 3004Mhz is my max spim1 stable with above settings, will try more vcore :D Here's Snadra shot:
http://www.xtremesystems.org/forums/...id=39047&stc=1
EDIT2: Bad news, 3012 is the max on this cpu with 1.63 volts, won't try any more volts
Quote:
Originally Posted by 4X4N
combination of MAL 9.0 and PRE of 7.0 usually work pretty well..these opty are tricky! do it in BIOS and see if you can even load up the built in memtest, if you can't....then don't bother to load up windows.
im havin trouble getting SP2004 and OCCT stable at 2900mhz / 1.54v
everything else is stable, 3dmark05 (4 loops), stresscpu (3days continuously), superPI (1m - 32m), CS:S (bout 4hrs of play).
im thinking its my ram timings etc...
http://img20.imageshack.us/img20/521...timings7wx.jpg
anythin other info u need just ask :), also rest of system specs r in sig
Ok latest update :toast: :
http://www.xtremesystems.org/forums/...id=39049&stc=1
Still unoptimized, 23min xx sec is achievable, I'll work on that tomorrow, now time for some BF2 ;)
Mine doesn't like sp2004 AT ALL. I can game and run OCCT at 3000 1.5v.
But my chip takes 1.425v to even prime at 2800.
Not sure what's going on, but as long as everything else runs stable, I'm happy.
Ok, since I am having trouble getting anything over 2.8 100% stable, I decided to try for a max clock. 11x278 1m pi pass. Broke into 27 seconds :woot: Opteron 148 CABYE 0528 GPMW
well, randomly, i did my 290x10 stable with at least 1.55v as opposed to your 1.54 *shrugQuote:
Originally Posted by NiSMo
Opteron 144 CABNE 0540 AMPW with HIS under WC
http://valid.x86-secret.com/cache/45631.png
http://users.skynet.be/pt1t/144/CPUMARK_405.PNG
Hi,
Now I have my new opteron...
Here you are the sigle:
CABGE 0536VPMW
How do you think about it?
This afternoon I will test it....
Bye! :D
not bad....what's it stable at :toast:Quote:
Originally Posted by Pt1t
i m still testing, for now , 4h prime95 , 3ghz 1.64vQuote:
Originally Posted by dinos22
damn that's just tops...you belgians are crazy mofo OCers with your super high vcore with ghetto WC hehehe :toast: :toast: :toast:Quote:
Originally Posted by Pt1t
The 0540 needs more vcore than 0530 :slapass: , i only give what it want :DQuote:
Originally Posted by dinos22
Hey! duds... is there anyone using socket 939 opterons here?
939 Opterons ??, why would we use those :rolleyes: (jk)Quote:
Originally Posted by Pirated