0.1$Quote:
Originally Posted by SAE
Printable View
0.1$Quote:
Originally Posted by SAE
too expensive
0.01$
That looks assome Tom but isnt there too much insulation??? looks like 20cm in diameter!!! nice fiting work so the cascade is in the white box wow nice!!!
Only about 1.5 cm insulation. :slobber:Quote:
Originally Posted by quintus
omg!!!
is that polyurethaan outside of evap and in that casing? and what is that on the botom of tha evap some protection or something speciale like diamonds :rolleyes: for beter heat transfer if its secret dan i will not ask anymore! so this is 2 compressors cascades wonder how much insulation u will use on 3 or 4 stage cascade! :confused: all mobo under izolation??? :slobber:
are not some of the components that are under that insulation melting of heat?
super good job i like the fact that is all in a box bot all around that shows experience
take in tha most friendly way as posible pls!!! thx
ps may we know yours evap design???
Got you now :)Quote:
Originally Posted by CodeRed
http://kaine.studentenweb.org/pifast43.34.jpg
here is an aircooled fx55
http://jason57.iwarp.com/stuff101/ca...ull2937air.JPG
So you have :DQuote:
Originally Posted by HaLDoL
Good job :toast:
@CCC, nice for air, is that Jason's old FX55?
Damn those FX55's :DQuote:
Originally Posted by CCC
That score is out of reach ... for now :)
Ok its not a AMD but still nice for a Intel on water i think? :)
I hit that stuppid wall @ 260 :(
http://bas.scooterforum.net/flarco/pifast_50.00.png
41.34 dfi 754 nf3. 3400+ clawhamer bh5 2-2-2 with 3.6vdimm
:D Here's my latest greatest.....
but with a couple new sticks of ram I bested the 39.36 by 2 seconds
my newest is 37.45 :banana:
http://users.skynet.be/bk265593/pifast2.JPG
WR , boxed koeler with 3200+ :D
Nice, what cooling?Quote:
Originally Posted by zyx
Hi, my friend CAL930's latest and fastest result "33.83s" is here:D
http://cal930.sakura.ne.jp/cgi-bin/c...ne;no=1022;id=
He usually registered his score to Ministry(http://contests.mofoc.net/index.php),
but he says that he was rejected this time...
Anyway, nice record, CAL930! :toast:
Nice one, Congrats to your friend kyosen :toast:Quote:
Originally Posted by kyosen
Insane time at 3636 :p: :toast:
Those AMD FX-55 chips are looking very tempting. After killing (well at least teporarily disabling) my IC7 Max 3 (fully modded), I was just testing my new completely stock IC7-G board today. Way behind the cascade/AMD setups I know, but pretty good for an Intel setup, especially one that's completely unmodded and "only" Mach II GT cooled... :p:
Well, that must have been a mistake! Please have him post is up at Ministry again and I will approve it right away :)Quote:
Originally Posted by kyosen
with 2 stage phase change look this but the text is in greek http://www.thelab.gr/showthread.php?s=&threadid=5695Quote:
Originally Posted by HaLDoL
Ministry has a new No 1 ;) Very nice score there :p:Quote:
Originally Posted by kyosen
LOL fastest Non-FX proc :D
Mobo : MSI K8n Neo2
Cpu : 3500+ NC v0.6
Mem : GSkill TCCD PC4400
http://members.home.nl/youpy/s939prom3_small.jpg
Let's see some winnie power now, this should be easy to beat :D
Got myself a new CPU. :D
NewCastle 3400+ 0434MPMW
I have to say i already like it a lot! :)
http://www.xtremesystems.org/forums/...id=19666&stc=1
This is just watercooled with plain water.
44.17sec
Might improve on that score, only got it tonite! ;)
Nice score YoupY ;)
Thats a very nice cpu :). :toast:
Dutchies are going strong :)
http://www.tweakers.net/ext/f/45570/full.jpg
Peter i think you can tweak your machine a bit more :D
take a look at CodeRed's incredible result:
http://home.exetel.com.au/codered/fx53/pifast3183.jpg
jack
the mem is on 166 unfortunaly :(
seems the chip-set is to old on the motherboard ??
wil try to get my hands on some tccd's
the mem is corsair 3500 2 times 256
i have also tried corsair 3200 LL rev 1.1
geil 4200
ocz 3700
but on every set-up i get errors above 225 on the mem :(
B@W will send me today a one gig OCZ 3200 rev2
together with the booster and the powerstream 520 and the OCZ titan 3 is this a complete OCZ bench rig
BIGTOE if i make pics , will OCZ send me some DDR2 ;) :toast: ???????
looks like a motherboard issue, dont you think?Quote:
Originally Posted by petervandamned
cause the mem youve tried all have different chips on them
did you dissable aggressive timings in bios?
I get PiFast errors too @ 225 mem, but ONLY if I use the divider, I can run 250 24/7 without any problems or errors, and that's without the divider, strange thing here...
Maybe a BIOS update will solve this, I'll have to wait and see ;)
(MSI K8N Neo2)
FX55@3.340 cooled by r404a mach1
MSI K8N Neo2 Plt
2x256 BH5 @ 1,5-2-2-5
http://www.ojdr2001.com/pf36,13.jpg
Been pushing it some more today and got under 43 seconds. :D
http://www.xtremesystems.org/forums/...id=19840&stc=1
That has got to be one of the best watercooled S754?
The only single phase system in the restrict club of "under 36"? :)
http://www.ojdr2001.com/pifast35,80.jpg
47.88s, Mobile 2500+, liquid 12.5°c
All submissions are on hold until i hear info off Kunaak ref this so called possable
way to cheat the Pifast Challenge.
It may effect the way I validate submissions in the future.
Regards
PMM
I have replied and given you all information I have.
as well as my ideas on how to improve or change the benchmark, if possible.
Thanks Kunakk :) For all interested I have Emailed author of the prog in regards to the vunerability with the hope of having it plugged.
There is something that could still give it away that a user is cheating which i'll continue to investigate to improve the authorising process.
Yeah, some seem to fake results ;) :D
No, I think it's great there are peeps taking care of cheaters and improving our bench apps :thumbsup:
I come from a distributed computing team that has had a stong desire
where possible for weeding out cheats from our Seti incounters and picking
out results that are dud due to overclocking to far or machine issues.
And I myself feel that people who feel the need to cheat are in essance only cheating themselves, I've said it before here its far more satisfying knowing you've done it legit and it your own skill that has been put to use to gain the score.
P4 560 :D
Doesn't convince me in Pifast, with my FX-53 much better time. :D
Dutchies are going strong indeed peet :)
Here one shot of my Power Newcastle S754 :D
Prom 507 cooled - no volt mods!!
http://www.xs4all.nl/~famchow/A64_34..._3.1GHz_11.JPG
http://www.xs4all.nl/~famchow/A64_34...een_3.2GHz.JPG
WR by MEMESAMAQuote:
Originally Posted by kakaroto
world record memesama
M/B：MSI K8N Ne02 Platinum
CPU： ADAFX55 0438TPMW
CPU Cooling：クリPro3 LN2
Chipset Cooling：ノーマル
Memory：PC3200 CL2.5 256MB×2 BH-5 0311
VGA：Canopus PWR128P(PCI)
HDD：IBM DTLA 15G
Power suplｌｙ：ZippyHP2-6460P
OS：Windows Server 2003
Vddr:3.60＝Vio3.60V
Vcore:1.1.86V(CPUZ読み)
HT:×1
http://blue.ap.teacup.com/memesama39...1102202236.jpg
woow, nice :D 33sec :slobber:
btw why is CrystalCPUID showing 2.6GHz??
Hm.. Very odd. Does the Crystal CPUID not define the current CPU speed, or just the standard speed?
Crystal CPUID always shows the current CPU speed, might he used Clockgen...Quote:
Originally Posted by JacobHansen
hmm, one shows MP13 and other 13.5 :S
Funny, that there is a 1.000 Mhz diffrenze in the pics..
Cheating or just a bug?
I test pifast4.3 & 4.1 different :shrug:
Well MEMESAMA has always been around at the Top of Overclocking. I doubt he is Cheating.. But, one should never say never..
Played around with some pi fast today....pretty cool bench. YOu can go a little farther with cpu than on super pi.
I'm coming for you Tom Holck ;):
DI cooling -69c load temps
http://pic8.picturetrail.com/VOL256/...6/75651722.jpg
39.73 with 3400+ newcastle 1.84v core 1x256 bh-5 3.6volt dfi nf3 cooling 2 stage phase change by "ice" of greece **thelab.gr**
woow, finally a Newcastle S754 under 40 :toast:Quote:
Originally Posted by zyx
Mine 3400+ NC is maxed at 3108MHz (310x10) 1:1 , which result lowest time 40.25
Congratulations zyx outstanding score, fighting w/ an 754 is not an easy task http://www.xtremesystems.org/forums/...lies/toast.gif
on an fx55 vapoLS ocz4200EL at 11x284 2.5-3-3-10.
thanks my friendQuote:
Originally Posted by enduracell
:toast: :toast:
With my new MSI k8n 0411 i can finaly do 1:1 :)
under the 38 sec :toast:
http://www.tweakers.net/ext/f/46825/full.jpg
this is with old corsair 3500 2-2-2-5
fot the specs :
oc-rig
zYx.... You can stop submitting your score i received it the 1st time
have all 7 ;)
Honestly you only need to send it once ;) it will go in when I get around to updating
it, system does not work in real time.
Won't be for a few days yet.. but it will.
My Score 45.35 Sec :(
My score 44.69
I'm happier with the bandwidth though ;)
http://home.planet.nl/~dikke332/4469.png
ok sory. :( my mistake, I thought the submission form was broken :( ;) :DQuote:
Originally Posted by PMM
Quote:
Originally Posted by zyx
Sorry m8y your right just seen your post over at Hexus so went to try
and submit a score to the database and got same error :(
That's why the multiple entries I had from you were showing.
the form submits in 2 different way's as a safeguard so I always get the results incase Hexus goes down I can still have the results to hand.
I don't really have the time to look at it at the mo :( bad time of the year
I'll try and sort as soon as :(
Sorry again having a moan without valid cause :(
Well cannot ftp in either so I presume some server tinkering has taken place at Hexus
sent David a PM just a matter of waiting see what occurs.
Results stopped entering the database on the 17th Nov so I have alot of back tracking to do through :(
Rest assured I do have everyones results even though they have not entered the database.
40,44sec - AIRCOOLED! winchester 3200+
Winchester 3200+/1,8V (IHS removed) @2925Mhz 325x9 CPU, 265MHz memory (166 in bios)
Coolermaster Hyper6
MSI Neo2 Platinum, Vdimm, vcore modded
2x256MB BH5 (Corsair) CL1,5-2-2-4/3,8V
ambient temp- 0*C- open window mod :D
plz register here too: http://www.ministry-oc.net/contests/...hp?c=1&start=0
You beat the previous air champ, HaLDoL, by almost 3 seconds :slobber:
40.52
http://people.freenet.de/funkflix/pifast40.jpg
Watercooled! :)
@Jaan
Great result! Damn, i benshed with my old Win2k ... And the Tras :4 + CL 1.5
would gives u a nice boost! I should give it a try! :)
omg... impressive!!! :toast:
Hmm, i can't publish any scores on the website u posted! Why?Quote:
Originally Posted by Garrett
http://people.freenet.de/funkflix/mini.jpg
have you registered on the site?
Sure! U can't connect to the resultpages without it! Strange!
Use IE instead of Mozilla (firefox) ;)Quote:
Originally Posted by GravediggA
My latest score:
http://www.hardwaredome.nl/images/sy...ifast/4045.JPG
40.45s
Specs:
A64 3500+ NC @ 3003MHz
MSI K8N Neo2 (vcore modded)
Corsair TWINX512-3200LLPT v1.1 (BH-5) @ DDR546 ~3,7v CL1,5-2-2-5
Prometeia Mach II r507
OCZ DDR-Booster
My suck NC can't run over 2.7g :(
And i'm using Zalman Cu7000
http://img.photobucket.com/albums/v1.../SNAG-0003.jpg
I have a question , when it shows : Error in comptutation .... what it means ?
Thx in advance
It means your CPU is unstable and wasn't able to complete the calculation without errors. Your score thus is invalid (when Error in computation is showing).Quote:
Originally Posted by xs64
I've got the problem that there is no speed increase (more often a decrease) when going beyond 334 and I always get an error in computation beyond 336 (no matter what mem dividers, chipset voltages or cpu multiplier)
My score:
40.61
http://www.thorry.net/pifast-4061.JPG
Winchester 3000+ @ 3 ghz
Mem won't get up to the high speeds, maybe my BH-5 needs replacing :(
So the 9x multiplier is holding you back now, right?Quote:
Originally Posted by Thorry
Right MP 9x sucks.
I'm tweakin at the moment, memtest86 now 5th run on test #5.
260x9 1:1 CL2 1T 2-2-2-5
Had to low LDT to 3x to get it up to 260.
265 gives errors at run #2
MSI K8N NEO2 unmodded
FX-55
Kingston PC3200 @ 262MHz
http://home.student.utwente.nl/r.makkink/41.16.JPG
fastest pifast on air in NL :D
Very very nice :toast:Quote:
Originally Posted by Jack
Now go and put on some phase change :p:
hehehe, Belgium beats the Netherlands :)Quote:
Originally Posted by Jack
http://users.pandora.be/gamer/FX-55/40.88.JPG
aircooled with XP-120.
I miss 2 things!!
1.The numbers at the bottom of the CPU-Z screen.
2.The Computation seems ok... where is that??
ehm, hidden ? :)
sorry, but don't think you need it to see this is legit.
didn't thought about it when I was trying to get the pic as small as possible.
I had an error in a previous computation at same speeds, but the score was higher then this.
I think someone can verify this result with his own result.
ok, I compared it with the other score (41.16) and you can see that my score is in all tests a bit faster, this is the proof ?
I'll try to remember next time ok ?
goddamn :DQuote:
Originally Posted by Gamer
nice work :toast:
i did my run with boxed cooler ;) havent got anything better
will try to beat you next week, but my mem is pretty much maxed out.
Will see what i can do :)
thx, and sorry about that :D
my ram isn't :
http://users.pandora.be/gamer/BH-5/280.JPG
:D
pffff :D
insane mem clocks :toast:
im gonna try win2k3 with some tweaks next week,
hope to cut off a couple of hunderdth of sec.
and play with my mem some more, 4.0V or so ;)
My calcs give 40.76 sec @ this speed. Close enough :)Quote:
Originally Posted by Gamer
Try setting the refresh rate to 200 @ 15.6usec for a small boost.
Damn nice for air cooled :toast:
ok, thx for the tip and the verification.
although I too have a calculator in windows ;)
it's been a while since I used an AMD machine, but I'm starting to like it :)
codered could i have that prog of yours that improve my pifast with ~0,04s?
i thought you mentioned it somewhere :)
need it to beat Gamer :D
please share the knowledge :)
which prog?Quote:
Originally Posted by Jack
I only use a real-time launcher for pifast and A64 Tweaker
links for both:
launcher.exe
A64 Tweaker
To run the launcher simply create a BAT file in the pifast directory with the following in it:
@echo off
launcher pifast41.exe hexus.txt
The link for launcher.exe doesn't work. I need this util too it will help me beat a friend (his is 0.03 below me)
Thanks. :toast:
try again, forgot to set the permissions :(Quote:
Originally Posted by enduracell
Thank you :toast: and thanks for all other tools u have offered me :)
http://www.xtremesystems.org/forums/...702#post573702Quote:
Originally Posted by CodeRed
that is what i meant :)
that launcher.exe prog is very nice btw :D
http://users.pandora.be/gamer/FX-55/37.JPG
FX-55 @ 3150 (max) :(
looking at your pifast clocks on air, i'd expect the cpu to go higher than that :stick:Quote:
Originally Posted by Gamer
and what i was wondering, what bios are you running and which driver do you have installed?
edit:
Tras at 4 might improve you score a bit more :)
We didn't use the launcher prog in the benchmarks shown there. All it does is running PiFast at realtime priority.Quote:
Originally Posted by Jack
Did some testing with it using the launcher and the dosbox at realtime but that was both giving the same scores.
39.38 with 3400+ newcastle 754 on dfi nf3 with 1.84 vcore 1x256 bh5 with 3.6 vdimm 2 stage phase change by "ice" of greece ***thelab.gr*** :toast:
damn skippy insane! Awesome job - Hellas rocks :hehe: :D
:D hellas :D :toast:Quote:
Originally Posted by bias_hjorth
Awesome job indeed, it's getting better and better, keep benching and tweaking :toast:
Sub 40 second air cooled Fx-55
http://www.aocb77.dsl.pipex.com/air3993pi.jpg
Ambient was -1.5C.
Also runs 3dmark at close to these speeds
http://service.futuremark.com/compare?2k1=8325950
Regards
Andy