Printable View
Hi AllQuote:
Originally Posted by ugp
I have the same trouble with OCCT.My CABNE0545 does 2Ghz on 1.2v.It is prime95 stable,3d2001/3/5 stable and folding stable but fails on OCCT.It is now at 2.5Ghz still on 1.2 v and still passes Prime 95 etc but still does not pass OCCT.
Smiffy
The ones in my sig. Ordered a new CPU waterblock, so I hope that helps even more. I have to RMA my GeiL chips because I overvolted them (im suprised they still work). Im the meantime I'm waiting for my OCZ Plat Rev. 2 set to arrive from newegg so I ship these GeiL back for RMA. I wonder if I'll have any success with those sticks. Here's a couple pics.Quote:
Originally Posted by Alaza
http://img346.imageshack.us/img346/7...05209em.th.jpg
http://img346.imageshack.us/img346/8...05212up.th.jpg
http://img346.imageshack.us/img346/9...05405rk.th.jpg
http://img346.imageshack.us/img346/3...05412rj.th.jpg
I believe my problem lies within my RAM..does anyone have any recommended settings for RAM with a Opteron?
I updated the post above. http://www.xtremesystems.org/forums/...postcount=4222
It shows timings, we have similar rams. Do you use all four slots like in your sig?
No right now I am using 512x2 for testing. I really don't need the 2GB total memory. 1GB is enough for me and my games and usage.Quote:
Originally Posted by coop
I use the same settings for when I use water also.
Well since I can't get any overclock Prime Stable I am going to be Xtreme and undervolt my Opty! Right now at v1.2 and load temps are 33-34C with Thermaltake Big Typhoon.
last week my opty was idleing at 32-33c... so i started to put everything back in my case.. reapplied some as5 now im idleing at 40-43c at stock speed... i reseated and reapplied as5 a few times already no change in temp... is there another option? im on water cooling
I have had this happen as well...and then all of a sudden it went back to normal...I cannot explain it. I am really thinking about popping the IHS off my Opty. Have been told many people experience extreme temp changes at full load...I hear the contact between them is very poor.
i might pop the lid off my opty also... ive been messing with this thing a for few days now trying to get my opty back on the right temp... thanks for the info ugp i thought this only happen to me..
Its ppl like you that make ram soooo expensive, why the hell should you send ram for RMA when YOU overvolted them :rolleyes: :nono:Quote:
Originally Posted by laydback
Dishonesty @ its best :slap: :mad:
I just don't know how to take the IHS off to begin with.
Because they weren't hitting their garunteed speeds of DDR600 with any of the suggested voltages. Once I gave em 3.1, guess what, DD600. People like me that make ram expensive??? I could remember 2 years back how much memory cost then, compared to then the cost for memory now is dirt cheap. If Newegg didnt want to lose money on RMA's because of "people like me" then they shouldnt offer them!!! Im gonna leave it at this, but I gotta be honest with you, your comment made me grit my teeth a little.Quote:
Originally Posted by alpha0ne
Alright people break it up...we all know even if we burned something out we would still try to RMA it to save the money.
Lets just leave it at that...! :D
OK I apologize for my comments, no way did I know they were not to spec.Quote:
Originally Posted by laydback
Cheers
yay were all friends again let all have a beer :toast:
just popped lid off the opty still same temp... mang this sux
mayb u can post ur problem in the water cooling section with ur w-c setup, maybe the guys over there can help u with the bad temps u are encountering ;)
Play with multipliers and dividers. For some reason certain multies work better than the others. Same goes for dividers. (166 divider seems to work better than 200) I'm also noticing that Opties have sh*tty memory controllers.Quote:
Originally Posted by ugp
I have 2x FPBW's...which one to keep ? :)
http://www.gv2nix.com/OCF/146%20CABYE%200540FPBW-b.jpg
http://www.gv2nix.com/OCF/146%20CABYE%200540FPBW-a.jpg
currently i'm using "206" but with bad cooler as 7000B-ALCU i'm getting up to damn 60°c at 3.0 and 1.525v :( LOAD.
But can you overclock further?. The temp sensor on the Neo2 seems to respond more to power usage then temperature :stick:.Quote:
Originally Posted by ridikolous
TEDY :
why not try them both and see which one performs best and gives you the better temps?
@ TEDY: I'm interested in the one you arent going to keep ;)
I'm too lazy :D
lol :nono:Quote:
Originally Posted by TEDY