Another thing about this 148 cacje... it doesn`t play nice with a 10x multi:eek:
Also I am finding the voltages on the DFI are all over the place when using the +VID.
Printable View
Another thing about this 148 cacje... it doesn`t play nice with a 10x multi:eek:
Also I am finding the voltages on the DFI are all over the place when using the +VID.
sli-dr, i'll try the 603 bios.Quote:
Originally Posted by Aerosupra
Most of the reports I've seen from folks who removed their IHS show some worthwhile gains from the reduction in load-temp. Have you tried higher than 1.525? Seems like you have a bit more cooling headroom if those are load temps.Quote:
Originally Posted by ic3m4n2005
max async to 9, read preamble to 16 and im a happy camper :)
Try:Quote:
Originally Posted by perry_78
MAL 9 - RP 7.5,
Mal 9 - RP 7
Mal 8 - RP 6
Mal 8 - RP 5.5
tRFC:12 instead of 14
Also play with TREF, Drive Strength and Data Drive Strength.
Bios: http://xtremesystems.org/forums/show...0&page=1&pp=25
Quote:
Originally Posted by Aerosupra
Yeah I can OCCT, and 32M all day long on my CABYE 0540FPMW at 3ghz 1.55v on a freezer 64
RP 16? And what is ur max now? :)Quote:
Originally Posted by perry_78
Hi Guys,
Im new here as a member but have been reading ALL these pages for a few weeks now
You guys rock with some of your clocks...im very impressed..
My opty seems prime stable at 2.87 but im sure i can get more as im using a 166 ram divider...
Im sure ill be asking alot of questions shortly so i wont bother today...
Just wanted to say ' WOOT' im in the opty club :)
time to keep on tweaking
Ive put a screenie in attachment for your eyes to look over... Please tell me if you spot something wrong as there is probably lots... Never really been into OC'g until NOW so i need to understand cas tras etc etc....
Welcome to XS fraggy!!!:) We are here to help so feel free to ask questions..
Almost 24sec 1m !! http://img413.imageshack.us/img413/1609/2587rf.th.jpg and a 22min 11sec 32m http://img521.imageshack.us/img521/7...132m7un.th.jpg with my H2O cooler.
Nice one coop! :D
Now i will see the 24.xxx! I can't get it .. can run 3200 1,55 but anything more not... :(
Got my Opty 148 from New Egg out of New Jersey.
Check out the awsome packing job.
http://www.designelectric.biz/images/PC300012.JPG
http://www.designelectric.biz/images/PC300013.JPG
Luckily it still runs @2.9ghz with an FX-55 hsf and 1.525v.
I'm going to try and send these photo's to AMD so they can see how flimsy that crap is.
LOL !!! I've read about things like that before, somebody ordered an FX-57 off eBay and their green cardboard carton was all beat up! I bet somebody dropped it or something.
Dropped it? I think someone played soccer with it.
Hmm I just noticed, I have a 146 sitting here with the same stepping as you, CAB2E 0546FPAW. I was hoping for 3GHz, but then again I do have some better cooling, and I have another 146 on the way from NCIX because they had some earlier steppings. I will sell the one I dont want :) Can you get yours to 3GHz with more voltage?
Not sure I want to push it much further. Gets up around 50c already and I'm not sure what a "safe" max voltage is.
Single core, 1.6v should be ok, but yeah if you are already getting up to 50c then you should get some better cooling.
For someone asked for CACJE, here is one.
Opteron 144 CACJE 0546APBW
@Stock VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/1544/2727smallfft8hrs21rj.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
@1.2VCore
<a href="http://imageshack.us"><img src="http://img414.imageshack.us/img414/7097/270x9smallfft12hrs17mk.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
Currently working on 2880MHz @1.5VCore. 3GHz is definitely a no-go with air-cooling, however. :(
BTW, how low can you go with VCore? Say, with 2.8~3.0VDIMM?
http://i5.photobucket.com/albums/y19...SuperPi-28.jpg
I am in need of some dire help with my Opty. I can't get any overclock at all to Prime what so ever...everything fails within 1 minute of Prime. I mean everything. I have tried all kinds of voltage at 300x10.0 there is. It is OCCT stable at v1.475. I don't understand this. Can something runnning in the background cause Prime not to run properly...? I am of lose of ideas with this.
WTF how can it end up like that :eek:Quote:
Originally Posted by Gitsum
It looks like someone took a mixer from the kitchen and mixed it up.
Maybe someone tried a bit of torture BEFORE it was in a mobo for a change :wierd: :cord: :rotf:Quote:
Originally Posted by eva2000