Printable View
Hi all, new to the forums, joined long time ago but never posted, was hoping you could lend a helping hand, with all the opteron threads i thought if anywhere you lot might know how good a stepping this is. I can get this 146 opteron delivered for £145 brand new retail stepping is this Cacje 0546bpmw
1362067k50512 does anyone have any knowledge of this stepping ??:confused: hoping to spend my money on a good clocker :D
Thanks in advance
=GAMMO=
my opty prime stable watercooled:
http://membres.lycos.fr/starostise/O...00MHz_1.56.JPG
Man, I wonder what the deal is with the complete lack of voltage scaling? What is changing in the MFG process? My opty hits 2.8ghz 24/7 stable with 1.4V, takes 1.45V for 2.9, and NOTHING makes it stable beyond 2950. Tried 1.6 just to try, but 3gig was a no go and didn't feel like frying my pretty descent O/C chip.
Does anyone have info on OC results with CACJE? How are these? Need to know asap. Thanks.
Hi, can anyone tell me if the following opteron 144 is a good overclocker,
CAB2E 0548EPAW, info needed asap
Thanks :confused: :confused: :confused:
Quote:
Originally Posted by Fallengod
My 148 is setting at 2884(262mhz) 1.38v(1.375 + 104%) Prime stable around the clock. More volts doesn`t seem to equal speed with this chip. :mad: Got to update the sig...
How is this stepping for a 146:
CAB2E 0546FPAW
I am unable to test it yet but it is the one I have. I will be using air cooling.
yay finally the moderation period is a over and i can post. :toast:Quote:
Originally Posted by killer_pav
er i have a 144 cab2e 0548fpmw its doing 2.7g with 1.45v tho. not as good as some other stepping but im on stock heatsink with a 120mm fan over it.
will post up pics when i reach home from work :banana:
here is my updated CAB2E 0546 bpmw The screen only shows 8m but I had just ran a 32m and click ok before I got a screenie...so I didn't feel like redoing it.im going to try to push it further but so far my attempts at 3 ghz have been unstable....contemplating taking off IHS...does anyone know what kind of mhz gain it may give me?
http://www.surrealtextures.com/screenie5.jpg
Just trying to get a CABYE , in my location its extremely difficult to find one, cuz CACJE came in stock everywhere :(
Does the CABYE 0540FPMW have a ticket to the 3GHz club ???? on water ..... :rolleyes:
Here is my Best 1M with my 146. Using OCZ PC4800 Elite Plat for ram. Great stuff.
http://www.xtremesystems.org/forums/...1&d=1135941459
http://img519.imageshack.us/img519/4...139v8ve.th.png
Opteron 146 CABYE 0540 FPBW
That's extremely good. What cooling is that?Quote:
Originally Posted by laydback
It's not as though any of you guys with a 3GHz is about to sell out within the next two weeks, eh? :)
heres mine so far. sorry click ok before i took the scr shot.
will more this weekend with better heatsink. :cool:
pi times aint very fast.just look at the 32m one. im folding while running the superpi.
http://i5.photobucket.com/albums/y199/guangg/2.jpg
divider 150.
Could you guys please try running with a 9x multiplier, FSB to 325, divider 120/200, ldt 1.50, and bh based ram at
enable
2
2
5
2
7
14
2
2
2
2
3120
enabled
auto
0
weak 2
level 1
0.9ns
fastest
0.5ns
256cycles
enable
08x
04x
disable (4burst)
Im getting bsods with everything over fsb320 and al dividers other than 100/200.
Would be greatly appreciated, could you also note which bios? I've been running 510-2FIX, 704-2BT with no avail.
Here's another 148 CABYE 0543FPMW. Running it at just under 3Ghz in P95 with my current cooling (48c load) and IHS on. Damn chip decided to stop right at 11x273 at what I think is its sweet spot vcore...
It's a little better than my 148 CABYE 0528GPMW (P95 12+ hours @ 2950). I might pull the IHS's off to maybe get a more out of them next time I tear down the machines for maint.
Scottk what board are you using,and what´s your idle temperature??and wy don't you try 300X10 with 1.6 vcore?Quote:
Originally Posted by scottk
It's on a DFI Ultra-D. Idle/Load reads 36c / 48c in ITESG. I tried up to 1.6225 vcore (1.475*110%) in bios and it didn't help to break 3G... just raised temps into the 50's. I think I just need to pull off the IHS to reduce the load temp. I'll get that 8 MHz somehow, lol.
a lot of your CABYE , CABNE, etc doing 3GHz at stock voltage, HOLY CPU !!!!!:slobber: What cooling for this?????
Is it possible to go 3GHz on air like the typhoon or so?
@scottk:
0543 FPMW here too, runnin 3ghz prime at around 1,45 but nothin more, like you said. 3040 not stable with 1,525v :(
got 34° or 35 ° on my expert. Should i take off IHS ?
I wish i could do 3ghz with stock voltage.. evne with 1.7v i cant hit 3ghz.. 2.95 is my max for 1M.. 2.9 for 32M
youre runnin on nf4 ultra-D ,right?Quote:
Originally Posted by perry_78
might be bios problem with dividers, a good bios could fix it,
I had this kind of prob on my neo4 pl. too (although with a winnie),
with higher htt and divider like 166 a had massive stability problems, the only bios on my board capable of runnin stable on that was 1.6, but again sorry, Im not on dfi