Thermal Interface Material, like Arctic Silver 5 and such. ;)Quote:
Originally Posted by TEDY
Printable View
Thermal Interface Material, like Arctic Silver 5 and such. ;)Quote:
Originally Posted by TEDY
it's AS5 ;)
dunno maybe i didnt applied it correctly
i have my 148 runing with multi x10 , and no problems (300x10) with patriot TCCD (300mhz@cl2,5-4-3-7 1T@2.65v)Quote:
Originally Posted by coop
Another strange problem occured, cpu was stable with 11x271 @ 1,41v, so i gave 11x272 a try. stable for about 10 secs :D
After wondering about this i tried 11x271 again and result was not stable, failed stresscpu after a minute or so (tested everything with it since it shows errors after 5 mins when prime takes 1,5 hours).
Question: Is this rig making fun of me or what ?!? What can i do now ? Is one component faulty ? Ram seems fine since it can do 1000% win memtest, cpu i don`t really know but a few mhz less it`s stable even if u test it twice :D
mainboard is DFI Expert, brand new so should be ok either. PLs help me before i rip off my own hair :)
lol
OCCT STABLE prime reports error
2.9 @ 1.413v....
here it goes again....damn buggy sp2004
found Opteron 146.. Is this a good overclocker CAB2E 0546GPAW ?
Opteron 146 CABYE 0540 FPMW
result´s here:
http://img308.imageshack.us/img308/2...zprime41ts.jpg
http://img308.imageshack.us/img308/8...hzprime9mb.jpg
Dual Prime it´s EXTREME HARD test, and was stable!! 0540 It´s really a extreme hard over serie!!!
Seems pretty good, 2,9ghz 1,4v is possible. Getting the same stepping myself in a couple of days. The 148 i have, does 2,8ghz 1,4v IHS off, not very good for a CABNE 0530APMW.:shakes:Quote:
Originally Posted by 865pe
http://img403.imageshack.us/img403/6892/fx5ar.th.jpg
So you have problems with yours as well I see. Do you accept being OCCT stable as truely being stable...so far I have found this to be atleast. I haven't had any problems during game play for hours on end atleast.Quote:
Originally Posted by TEDY
:D Check by Yourself..........Quote:
Originally Posted by 865pe
http://monsterprozi.mo.funpic.de/opt146html.htm
:toast:
what's the easiest way to cpu burn in ? any links? :D
**DDR610 SP32m
http://img354.imageshack.us/img354/5...p32m5ar.th.gif
**DDR620 SP32m
http://img354.imageshack.us/img354/6...olts6ip.th.gif
**DDR620 3d05 stock 7800gt Futuremark 1613432
http://img526.imageshack.us/img526/5...t1663rb.th.gif
da-key: not fair your temps are low :)
your lines are :banana::banana::banana::banana:ing stable ...all this with antec?
big thanks :toast:Quote:
Originally Posted by HARDCORECLOCKER
OCZ 600SLI in my sig. Great psu.Quote:
Originally Posted by TEDY
This is the highest I can get my 144 on stock air + paste :(
http://img.photobucket.com/albums/v2...0r/2700mhz.jpg
CABNE 0544 YPMW
wow...Quote:
Originally Posted by Carlz0r
a lot vcore.. how are your temp´s??
if i was you.. sell this one and try again with other one!!
My temps are fine, doesn't go above 55 degrees at load. I plan on selling this and getting a 148.
Well i´m sorry but my cpu pass OCCTool but it freezes at 3d aplications,i have to lower 5 mhz the htt to br truely stable.Quote:
Originally Posted by ugp
http://img477.imageshack.us/img477/7564/273766wr.jpg
http://img432.imageshack.us/img432/1...0medium7ez.jpg
http://img411.imageshack.us/img411/7...0medium7sv.jpg
I can't oc more than 10x269 ???? check the foto ,for any Help thanks in advance.
kosmo
[img=http://img429.imageshack.us/img429/558/fotografies7097bk.th.jpg]
Sorry Kosmo but your foto is very confused and the timmings are hidden,try another angle and larger file please.
I hope that is more clear.
http://img434.imageshack.us/img434/4...s7097nu.th.jpg
Are you kidding?? It's impossible to read sth!:(Quote:
Originally Posted by kosmo
...finaly after the death of my CABBYE 0540 FPBW I got a good one...CABYE 0540 FPMW batch 297...thanks TEDY :clap: :clap: :clap: for this one...so I can`t pass 3ghz with OCCT yet...but I think this one has potentials...:D max tcase 63°C and wattage 61W
http://img274.imageshack.us/img274/484/29901385tz.jpg
Some more testings tomorrow...
Regards,
Primoz
i can reach 3ghz at 1.6 but it freezes in 3D aplications altough it runs OCCTool,to pass Prime and 3D games i have to put it at 2950 ..it´s ridicolous.:mad: