XS HWBot Team

Printable View

Show 100 post(s) from this thread on one page

04-30-2012, 06:02 PM
BeepBeep2

Quote:

Originally Posted by Hondacity

the statement says "they bench with ivy"

wonder no more.

I was being a little sarcastic, everyone knows Ivy rocks :D
05-01-2012, 01:39 AM
Don_Dan

Alvin, what chips are used on your PI Black kit? Hyper or BBSE? Hyper won't be your best choice for IB. Can you post a picture of the kit?
I saw you asked in youngpro's thread if someone has tested the TridentX 2400 kit, yes, there is a thread by PcCI2iminal in the Xtreme Bandwidth section. Those should treat you well too.
05-01-2012, 11:04 AM
G.Foyle

Having fun with Ivy without IHS, waiting for retail CPU (I don't wanna go to pro :D ):

http://www.teampclab.pl/wyniki/ivy_b...y_delidded.jpg

http://www.teampclab.pl/wyniki/ivy_b...valid_6510.png

http://www.teampclab.pl/wyniki/ivy_b...m01_141043.png

So relaxing, benching at full pot, no coldbugs or coldboots, mobo boots every single time :)
05-01-2012, 11:25 AM
Don_Dan

Nice! :D

How about another 32M? ^^
05-01-2012, 11:33 AM
Movieman

Warning :SPAM!:D

If any of you guys need a break from benching here's a good use for any 24/7 capable machines you have..
http://www.xtremesystems.org/forums/...k-May-1-7-2012

Ok, thats my spiel and I'll leave you in peace now!
Thanks
Dave
05-01-2012, 11:46 AM
l0ud_sil3nc3

G that is awesome, you have a pretty nice chip, 6.5 with only 1.82v, hopefully your retail clocks better:toast:

Quote:

Originally Posted by Movieman

Warning :SPAM!:D

If any of you guys need a break from benching here's a good use for any 24/7 capable machines you have..
http://www.xtremesystems.org/forums/...k-May-1-7-2012

Ok, thats my spiel and I'll leave you in peace now!
Thanks
Dave

I got email #134359 out of 168000:D

I think I will setup the daily for this and help the team out.
05-01-2012, 11:48 AM
Movieman

Quote:

Originally Posted by l0ud_sil3nc3

I got email #134359 out of 168000:D

I think I will setup the daily for this and help the team out.

:bows:
Thanks!
05-01-2012, 11:50 AM
l0ud_sil3nc3

Quote:

Originally Posted by Movieman

:bows:
Thanks!

might shoot you a pm or two as I have never set up a folding client but I am reading the link from your last post right now.
05-01-2012, 12:45 PM
Mafio

@ G.Foyle: did you had any gain popping the IHS ?
05-01-2012, 01:53 PM
G.Foyle

Dunno, I removed the IHS to test OC on air. Never tried it on subzero with IHS. On air - no gain.
05-01-2012, 03:44 PM
ZenEffect

Quote:

Originally Posted by G.Foyle

Dunno, I removed the IHS to test OC on air. Never tried it on subzero with IHS. On air - no gain.

so temps ARENT being caused by tim layer instead of solder? im grabbing 3750k this week sometime hopefully and 3770k after the 15th.
05-01-2012, 09:25 PM
G.Foyle

Here's the conclusion of my article, translated by google's robomonkeys:
http://translate.googleusercontent.c...rt49727-3.html

Maybe on water or with select HDT coolers you would have a small gain, but in usual conditions it's very dangerous, creates lots of problems and doesn't help at all.
05-01-2012, 09:52 PM
l0ud_sil3nc3

Quote:

Originally Posted by G.Foyle

Here's the conclusion of my article, translated by google's robomonkeys:
http://translate.googleusercontent.c...rt49727-3.html

Maybe on water or with select HDT coolers you would have a small gain, but in usual conditions it's very dangerous, creates lots of problems and doesn't help at all.

excellent review, weird to see temps increase in some instances with IHS removed.
05-02-2012, 05:51 AM
BeepBeep2

Quote:

Originally Posted by G.Foyle

Here's the conclusion of my article, translated by google's robomonkeys:
http://translate.googleusercontent.c...rt49727-3.html

Maybe on water or with select HDT coolers you would have a small gain, but in usual conditions it's very dangerous, creates lots of problems and doesn't help at all.

I think with HDT coolers it would be even more dangerous...creating hot spots on the die between the heatpipe areas.

I didn't think the IHS/paste had all that much to do with temps either.
05-02-2012, 06:17 AM
Hondacity

HDT isnt good at all. it doesn't have heat capacity like a normal venom cooler.
05-02-2012, 06:53 AM
G.Foyle

Thanks for the kind words guys :)

HDT with maximum heatpipes and minimum 'dead areas' wouldn't be very dangerous since silicon itself is a decent heat conductor. Vapor chamber would be the best of course :)
05-02-2012, 07:01 AM
Hondacity

HDT for example..you have the small die area...you won't be able to utilize the heatpipes that doesn't touch the die.

With the plate from for example venom, heat will be spread on the plate. hence "heat spreading". and sandwiching plates lol
05-02-2012, 12:24 PM
BeepBeep2

Quote:

Originally Posted by G.Foyle

Thanks for the kind words guys :)

HDT with maximum heatpipes and minimum 'dead areas' wouldn't be very dangerous since silicon itself is a decent heat conductor. Vapor chamber would be the best of course :)

But there will be parts of the die with no contact.
05-02-2012, 03:28 PM
Dumo

Stil have a "gem" Intel yonah:D

http://img820.imageshack.us/img820/4...nshot070xq.jpg
05-03-2012, 06:37 AM
Hondacity

man you truly are XIP :D
05-06-2012, 05:01 PM
MTP04

Quote:

Originally Posted by G.Foyle

http://www.teampclab.pl/wyniki/ivy_b...m01_141043.png

So relaxing, benching at full pot, no coldbugs or coldboots, mobo boots every single time :)

Looking good G! I hope you or someone else on our team is gonna go for a dirty 01 score. With a high clocking Ivy, the 580GTX can finally spread its wings and fly.:D
05-06-2012, 06:26 PM
trans am

damn I wish I had someone to tell me if this retail is any good. Gfoyle's clock is awesome I just would like to know what your guys air or h20 clocks were before you got your containers on. I'm new to all this. also I see all of you on some shamino bios with all these RAM tweak settings for bbse, ic specific. I cannot see those setting in my bios> do I need to run Ln2 mode to get those settings or is it a specific bios you are on?
I found this MVE guide on youtube but I can't get the bios setting right. I got up to the beer part and after that it gets really cloudy.. I can't remember what you set after the beer. I hit del key after post but I end up getting some black and red screen bios except I can move my mouse in it.

http://www.youtube.com/watch?v=k-xN4...ature=youtu.be
05-07-2012, 01:30 AM
G.Foyle

@ transam: download Shamino's guide: http://www.datafilehost.com/download-1636169b.html
You need to set ln2 mode to see additional options in bios.

I tried one retail 3570K, and it was the crappiest IB ever made: CB at -120, -140 after tweaking :( Wouldnt even be stable at 6 GHz :( Time for another chip.
05-07-2012, 11:55 AM
Don_Dan

Quote:

Originally Posted by trans am

I found this MVE guide on youtube but I can't get the bios setting right. I got up to the beer part and after that it gets really cloudy.. I can't remember what you set after the beer.

You'd better put the beer part after the clocking part... :yepp: :rofl:

Quote:

Originally Posted by G.Foyle

I tried one retail 3570K, and it was the crappiest IB ever made: CB at -120, -140 after tweaking :( Wouldnt even be stable at 6 GHz :( Time for another chip.

I'm sure the next one will be much better! :up:
05-07-2012, 05:42 PM
BeepBeep2

Should Z68 be okay with Ivy?

Show 100 post(s) from this thread on one page