Printable View
i guys , i was thinking buying a prommy, did the optyeron 148 0543 FPMW have coldbug???Can you guys explain what the cold bug consists?? I heard about that and now i dont know if its a good ideia buy the prommy , what you guys say???
By the way , what was is best result stable of opty 148 0543 FPMW with WC and aircooling?????
32m @3280mhz with water cooler [IMG]http://img481.imageshack.us/img481/2...32806md.th.jpg[/IMG]
I dont know, all my programs was disabled from background.Quote:
Originally Posted by dogsx2
What I can quess so maybe +40-50ºC:rolleyes:
damn 7000b-alcu sux
:(
http://img487.imageshack.us/img487/5...pugraph9iv.gif
voltages OK ?
http://img487.imageshack.us/img487/1...6volt125jy.gif
http://img487.imageshack.us/img487/9...oltcore9lb.gif
http://img487.imageshack.us/img487/2...36volt38bw.gif
http://img487.imageshack.us/img487/1...36volt59kj.gif
Or should i change anything besidec cooler i know :fact:
I'd say just the cooler. 1.4v going up to 48. That is not good.
Hey guys, been busy with getting ready for xmas and all, I actually traded my cab2e 0546 bpmw for my friend's cabye 0535 xpmw but it actually clocked worse so im gonna trade back since he doesn't overclock his stuff (using a server board :( ) once I get it back expect some screens! and btw I think the dfi's temp sensor is a little off in windows, cause I idle at 33-34 in windows but in the bios it says 38-39 so I am debating on popping off the IHS. What are the chances it'll give me anymore ocing room or is it not worth it?
You probably didn't mount the AlCu right...Opteron 148 @ 2.8ghz 1.45 vcore, 32c idle/42c load
Temps in Windows and in BIOS have always been different with me as well. BIOS is always higher than Windows is for some reason. I wonder which one is actually right...
Got the cookies baked Cpuz58780
http://img512.imageshack.us/img512/9...6sec2zk.th.gif
In time for Christmas. :p: DDR 620
http://img512.imageshack.us/img512/9...ed26sec2zk.gif
Not much exp. with this Cab2e yet but working on it.
Opty CAB2E 0546 BPMW is up and rearing for more. I'm thinking about removing the IHS.Cpuz58641
http://img509.imageshack.us/img509/5...gned7oq.th.gif
http://img509.imageshack.us/img509/5226/33signed7oq.gif
Shot of the DD Maze3 :thumbsup: .
http://img389.imageshack.us/img389/2...gned6ss.th.jpg
http://img389.imageshack.us/img389/2...msigned6ss.jpg
Thanks to ImageShack for Free Image Hosting
Do you also have a Waterblock on your chipset there too? Those are nice temps for water cooling...Quote:
Originally Posted by da-key
Water Cooling Setup:
All 1/2"
Copper TDX Block for Athlon64 754/939/940
ATI X18 Full Coverage Block
12V DD-D5 Pump
Black Ice Micro II
Danger Den Single 5 1/4" Bay Reservoir
Tygon 3603 Tubing 1/2" ID 3/4" OD
$367.28 Subtotal
$36.79 Discount
$330.49 Discounted Price
$25.50 Shipping
$355.99 Total price!
What do you guys think??
Does anyone know if a waterblock will fit the chipset if only using the top PCI-e slot with a x1800XT and the waterblock?
Thts because in your bios the CPU does not idle, like it does in windows. The OS provides a function (cant remember the name) tht makes the CPU idle when it is not being used, hence the lower temps. Hopefully someone can provide the proper name for wht im talking abtQuote:
Originally Posted by ugp
From the recent results in this thread, you can tell tht it is winter time in a lot of places! I remember when this thread first started tht there wernt not many peeps with SS over 3.3Ghz on air/water but now it has become quite common :p: . If it gets real cold here in Cyprus, which is a big if, the lowest i think i can hope for is arnd 2-3C I will take my case outside and push some numbers.
All the results are making my chip feel inferior, LOL :D
I finally got my new opteron 144. It is a CABGE tho but its very voltage loving.
This happened when it was put into a DFI nForce 4
http://img.photobucket.com/albums/v6...tabe30h1oe.jpg
What do you think of it?
I just need to buy my own DFI board:P
Regards
tried now 3.0 1.5v 37c idle / 55-56 load :(Quote:
Originally Posted by m3ta1head
Quote:
Originally Posted by TEDY
This CPU is not working properly in your comp...as I said before just sell it to me...I`ll manage to keep it cooler :p:
Regards,
Primoz
p.s. This is a FPBW one?
Quote:
Originally Posted by ugp
Yeah No problem. I use this and it gives me 2mm more clearance than the stock solution. http://www.koolance.com/shop/product...3884978641f369
The clearflex is just as good and much cheaper.
The 12 pump is a good one, but I prefer ac pumps and a relay. A lot of pumps out there...Make a solid investment .. is my advice. Iwaki is my first choice every time. And I personally use a pressure rated md30 japanese motor.
I've used Danger Den on all my builds for the last 2 1/2 years. I went back to my Maze3 for some retro action!
Another note... the full body x1800 cooler won't do much better than a gpu block and some ramsinks. If budget is not a concern then go for it. Personal experience is I don't keep my video cards long at least not on water there whole life. So, the fullbody coolers I bought for my 6800's were just useless paperweights to the tune of $240 until I sold them months later.
http://slike.slo-tech.com/16549.jpg
Vapochill XE Opteron 146 CABYE 0540 FPBW in action.:banana:
GUFY nice rusults!...Lucky you with such a good chip...:p: Hope will get my hands on a FPBW again...:rolleyes:
Regards,
Primoz
What th f#%$ is going on here :(
Apart from everything i tried the following...
a) 11x273 with 166div -> OCCT stable ;)
b) 10x300 with 166div -> not stable :(
So ive looked up the HTT since i left it on auto (tried 3 before), 1092 on a) and 900 on b), vcore was 1,45v in both cases, nothing chaged except multi and htt of course. SO first you will think its the ram, so i tested with winmemtest and aborted it by myself after 600%. So whats going on is th Expert not able to do 300 htt ? What would you guys recommend me ?
My other Hardware is, Opteron 148, X1800XT, 600w Powerstream, X-Fi and 2x160 Hitachi Sata2 @ RAid 0. I would appreciate your help :)
I have a couple 148's and I found the 10x to be somewhat uncooperative as well. Just don't work as well even when ram is not an issue. It is not the board imo. ***edit***I had a 146 and it was fantastic with the 10x.
Had a 146 too no prob here too ;)
Another damn thing is that the chip goes to 2980 with 1,41v and after this mark its stable at 3ghz but 3030 no go even with 1,5v, normal thing too ?? Was hoping for around 3100 :(
How are the latest Opteron 144s doing? i'm tempted to order one to see if its any good....
It would prolly be better to buy one of ebay .. so you can find yourself one with a good stepping and stuff..Quote:
Originally Posted by K.I.T.T.
regards
Hmmm what stepping is your? is it a cabge 0545? nice clocks!! :toast:Quote:
Originally Posted by x3ro
what vcore?
I got mine of ebay....not the best stepping. Does 2.75 GHz at 1.5 V, but thn is held back by temps :(
Here is alittle something so far for you guys...
4 sticks of OCZ Plat Rev. 2 at 280FSB 3-4-4-8-2T and still going.
Opteron @ 2.8 @ v1.400
http://i5.photobucket.com/albums/y19...148/280x10.jpg
Also to add...I have noticed something... with the same voltage from 2.7 to 2.8 the temps are lower with 2.8...I wonder why that is...also my Chipset and PWMIC is lower as well by a few degrees.
273x11.0 @ v1.500
http://i5.photobucket.com/albums/y19...148/273x11.jpg
With these settings and HIS x1800XT @ 690/800 (Stock BIOS)..
3Mark01SE-35,624