Water Cooled Case Gallery

Quote:

---

Originally Posted by nitteo

I know it supposed to be fan>shroud>rad, but I have to sacrifice performance (for now) to get it to fit underneath the "cupboard" after I use the comp. Notice I already took off the case's feet.

When I tear those down Ill place the fans ontop...here is a pic of my deskspace I have to work with:
http://i6.photobucket.com/albums/y218/gw4k/DSC_0030.jpg

---

Gotcha. Looks great otherwise though. Its the first Fatality Zalman build I've seen.

Finished.

http://img521.imageshack.us/img521/1603/97337940vb8.jpg

http://img146.imageshack.us/img146/3384/40027920sy4.jpg



Nothing more to say or do!

Quote:

---

Originally Posted by ranker

He's actually using the shroud incorrectly.

Nitteo: The fans need to be mounted on the outside of the shroud. The purpose of the shroud is to eliminate dead spots from having the fans directly attached to the radiator itself.

---

"...although I don't know whether it's more effective that way or not."

Didn't know whether the shroud was doing anything, which is why I added that sentence :up:

Quote:

---

Originally Posted by Mankz_91

Finished.

http://img146.imageshack.us/img146/3384/40027920sy4.jpg



Nothing more to say or do!

---

more pics with the side panel off plz :)

Quote:

---

Originally Posted by YugenM

"...although I don't know whether it's more effective that way or not."

Didn't know whether the shroud was doing anything, which is why I added that sentence :up:

---

The shroud may not be affecting much, but, I bet that cupboard being so close is. I would venture that it is restricting the air flow through the fan, pressure build up.

Quote:

---

Originally Posted by zhangmaster12

i think that a 120.2 will fit on the top of the case, im willing to sacrifice 2 drive bays if needed.

i think it has room, look at this http://www.systemcooling.com/lian_li_pc-7b-07.html

---

copy that, good luck and looking forward to seeing it when completed:yepp:

heres mine

Wow superb cabling and extremely clean and neat implementation head to toe
I have never seen better.
The only change for me would be round IDE & FDD cables but you even made that sweet.
WoW

Quote:

---

Originally Posted by owcraftsman

Wow superb cabling and extremely clean and neat implementation head to toe
I have never seen better.
The only change for me would be round IDE & FDD cables but you even made that sweet.
WoW

---

lol thx alot! check it out here a few more pics http://www.xtremesystems.org/forums/...d.php?t=148736

http://i169.photobucket.com/albums/u...o/P1060339.jpg

http://i169.photobucket.com/albums/u...o/P1060338.jpg

http://i169.photobucket.com/albums/u...o/P1060337.jpg

http://i169.photobucket.com/albums/u...o/P1060336.jpg

Crappy XION case, needs a dustin. But hey, got it really cheap (10 dollars) so I said whatever, and took it.

Oh, and first post on XS!

Note my ghetto round IDE cables and ghetto radiator air duct. Electrical tape for the win yo!

crackbag good to see you have your pc up and running, and i would add a very clean finished you did to it.

shlomo welcome to XS liquid cooling...

Guess this should go in here now its just about done :)

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid



http://www.coolercasesuk.co.uk/rossi.../Stacker_2.jpg

http://www.coolercasesuk.co.uk/rossi.../Stacker_3.jpg

That is as COOL as the other side of the pillow my man. Solid.

Did you finish wiring it?

nitteo

http://i6.photobucket.com/albums/y218/gw4k/t.jpg

did you take this with wideangle lens or something? maybe a fisheye?

Quote:

---

Originally Posted by coolmiester

Guess this should go in here now its just about done :)

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid

---

"Che spettacolo" :D

Valentino Rossy rulez!!!

Quote:

---

Originally Posted by crackbag

heres mine

---

Very nice case, can you show me the back of cables.
Thanks a lot.-

Quote:

---

Originally Posted by Grinch

nitteo

http://i6.photobucket.com/albums/y218/gw4k/t.jpg

did you take this with wideangle lens or something? maybe a fisheye?

---

Yup, D200 with a Tokina 10-17mm lens, this was at 17mm though. Here is a shot on 10mm.

http://i6.photobucket.com/albums/y218/gw4k/DSC_0029.jpg

go 'fins!

cool as hell looking!

Nitteo, you have the same phone as me!
HTC s620 :D

Quote:

---

Originally Posted by coolmiester

Guess this should go in here now its just about done :)

System Spec:
Tyan Tiger K8WE S2877ANRF
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512GB OCZ 3200 EL DDR ECC Reg / Dual Channel
Gainwards 8800GTX Ultra Golden Sample
2x 74GB Raptors

Watercooling:
2x Danger Den TDX A64 Blocks
Danger Den NV8800 Block
Laing DDC 10watt - Alphacool Dual Plexi Res
HWLabs Custom Made GTX X-Flow
2x Yate Loon D12SL-12
Tygon Hose
Fesser One Liquid



http://www.coolercasesuk.co.uk/rossi.../Stacker_2.jpg

http://www.coolercasesuk.co.uk/rossi.../Stacker_3.jpg

---

Nice paintjob man!!!

Only missing the wires:rofl:

Quote:

---

Originally Posted by Shlomo

Crappy XION case, needs a dustin. But hey, got it really cheap (10 dollars) so I said whatever, and took it.

Oh, and first post on XS!

Note my ghetto round IDE cables and ghetto radiator air duct. Electrical tape for the win yo!

---

:welcome: ghetto case shlome

that tape is freakin cool bro;)

well since i killed my EVGA 680i A1 board last night, i had to order a new one (Asus P5K Deluxe) which will be here tomorrow afternoon, so i spent tonight getting all my WC gear ready to slap on there and thought i would take some photos to share. enjoy.

(comments more than welcome)

http://img78.imageshack.us/img78/792...comp032de6.jpg
Full view
http://img440.imageshack.us/img440/3...comp043tl4.jpg
D-Tek Fuzion
http://img78.imageshack.us/img78/249...comp044vu3.jpg
EK Multioption
http://img78.imageshack.us/img78/231...comp045io6.jpg
Lower part
http://img207.imageshack.us/img207/5...comp046gp0.jpg
Side shot
http://img207.imageshack.us/img207/2...comp051uj9.jpg
EK-FC8800 (sorry for the blurry :()
http://img440.imageshack.us/img440/4...comp053fx8.jpg
And the Coolsleeves

well thats it for now, more pictures tomorrow with the full asembly if anyone wants

Quote:

---

Originally Posted by hobbes70790

well since i killed my EVGA 680i A1 board last night, i had to order a new one (Asus P5K Deluxe) which will be here tomorrow afternoon, so i spent tonight getting all my WC gear ready to slap on there and thought i would take some photos to share. enjoy.

(comments more than welcome)

http://img78.imageshack.us/img78/792...comp032de6.jpg
Full view
http://img440.imageshack.us/img440/3...comp043tl4.jpg
D-Tek Fuzion
http://img78.imageshack.us/img78/249...comp044vu3.jpg
EK Multioption
http://img78.imageshack.us/img78/231...comp045io6.jpg
Lower part
http://img207.imageshack.us/img207/5...comp046gp0.jpg
Side shot
http://img207.imageshack.us/img207/2...comp051uj9.jpg
EK-FC8800 (sorry for the blurry :()
http://img440.imageshack.us/img440/4...comp053fx8.jpg
And the Coolsleeves

well thats it for now, more pictures tomorrow with the full asembly if anyone wants

---

:welcome: to Xtremesystems!

Nice looking setup you have there..:up:

hobbes welcome to XS, pics are looking good, almost good enough to drink your 4seasons there, hehehe...

wow hobbes niccceeeee how many uv lights you using and what type