Very nice post Umbre :toast: It's good to see someone from the Aix-en-Pce team :DQuote:
Originally Posted by umbre_tombetoil
I am really looking forward to see what your CPU will do under waterchiller...
Printable View
Very nice post Umbre :toast: It's good to see someone from the Aix-en-Pce team :DQuote:
Originally Posted by umbre_tombetoil
I am really looking forward to see what your CPU will do under waterchiller...
Got my 2nd 3.2+Ghz air cooled Opty bench last night:)
The 1st is my 148 CABYE (forgot the week)and ran the 2K1 score in my sig.
The 2nd is a CABNE 0530APMW that I've had for awhile an it's on a DFI Ultra D that is primarily a F@H rig. Got in a 2K1 bench @3.22G
Don't laugh too hard at the score as it was on a x300 card at all default settings. Probably the worlds worst 2K1 score @3.2G.;)
The CABNE 0530APMW is always impressive (the WR @3617MHz done by Overcrash was performed with a CABNE 0530APMW). Have you got the opportunity to tweak it under watercooling?
now thats 3637Mhz :Quote:
Originally Posted by before
http://valid.x86-secret.com/show_oc.php?id=57577
always by me :banana:
What's the best bandwidth achieved on an Opteron?
http://img.photobucket.com/albums/v6...Sandra8740.jpg
You'r the man, no doubt about it! :toast: What was the temp of your waterchilling?Quote:
Originally Posted by overcrash86
No water, I'm just an air cooled 2K1 bencher. Haven't seen too many 2K1 runs on air at 3.2GQuote:
Originally Posted by before
Dunno, but u can battle vs. my winchester.. :p: :toast:Quote:
Originally Posted by Zeus
Οpteron 144 CABGE 0536VPMW Prometeia Mach I@R507,2x512 G.Skill LC....
32M 3150:
http://img488.imageshack.us/img488/7...31506xd.th.jpg
1M 3198:
http://img173.imageshack.us/img173/5...irec5es.th.jpg
A different 0543fpmw, 3305 1m and a 3255 32m with water. [IMG]http://img512.imageshack.us/img512/1...05254204nq.jpg[/IMG] [IMG]http://img512.imageshack.us/img512/6...25522457uq.jpg[/IMG] This was all the iterations I could handle...[IMG]http://img274.imageshack.us/img274/4...20049qe.th.jpg[/IMG]
did you gays think im having bad temps with WC opty 148 0543 VPMW , i have 28c idle and 37c runing OCCT , not too much for WC ,runing at 3000@1,40'v ?????
editttt
I am still testing my Opty with voltage...right now I idle at 31C and load temps at 41-42C
Room temps are pretty high with the heat on in my house though right now.
Anything lower than v1.475 is not stable at all. And even with v1.65 @ 3.15GHz isn't stable either. I need to maybe set this bad boy under some water cooling.
CPU 18c idle @ 1,648v :nono:Quote:
Originally Posted by coop
Lol yeah :nono: :nono:Quote:
Originally Posted by DesertShooter
Which shop did you bought that one, because i need a spare if i am going to pop off ihs :)Quote:
Originally Posted by coop
I think my 146 will be good under DI! It can post and 'semi-boot' @ 3.3GHz (on Air) but Temperatures reach like 55C on idle with 1.55V!!!!
And I have a 144 coming my way too. :D
Initial results of my 146. :)
http://img359.imageshack.us/img359/7...3ghz32m6lz.jpg
http://img359.imageshack.us/img359/6886/25sek8gf.jpg
Very nice people.
Nice :)Quote:
Originally Posted by funkflix
Which stepping is that?
0546GPAW :)
Some more results, with X850XT:
http://img321.imageshack.us/img321/4...dmark018sg.jpg
http://img321.imageshack.us/img321/8117/am3100k7rv.jpg
IHS now removed, give me 14-17°C :eek:
Two benches with 3200MHz. SPi was on Win2k, just for fun. Think with right OS i can get the 24.xxx. :toast:
http://img507.imageshack.us/img507/3...hz1mjpg7bp.jpg
http://img507.imageshack.us/img507/9603/am3101k1vf.jpg
Nice clocks! :)
hi guys , i bought a 2x512mb patriot TCCD today , and now i change multi x11 to multi x10 and im runing like this :
>> http://img380.imageshack.us/img380/2...0mhz0ej.th.jpg
sandra >>http://img524.imageshack.us/img524/6...0mhz1xs.th.jpg
its ok like this or should i change the multi to x11 again and 273x11 and ram to 273mhz????
Hey guys, I just joined these forums and this is my first post(YAY!) Well seeing as the hype was big for these 939 opterons, I went ahead and bought one since I felt that my venice @ 2.85 just wasn't enough. I just got my oem opty from the egg today, hoping to get the 0543 caybe that others recently got and seem to be overclocking REALLY well. I was kinda disappointed when I opened it and it was a CAB2E 0546BPMW...However I am currently at 2.92 with 8m super pi stability (haven't tried farther here yet, still testing) but I tried to raise it a little further to 2.94 and started fail super pie like crazy, and went as far as 1.71v with no improvement. I really want to hit 3 ghz so any suggestions will be appreciated. Thanks!