Printable View
Man i just want mine here....
I hope I dont have the problems you guys dfo, but im sure i will...
This is the missing link in my upgrade, after this ill be all set to RULE THE WORLD, MUAHAHAHAAAAAA!!!..
LOL im an idiot sometimes, my luck mine wont even do over 250 like these pat's
hehe ;)Quote:
Originally Posted by Philosophy
you just have to remember to Sacrifice two noobs for the blessing and DDR-600 will be yours..:toast:Quote:
Originally Posted by Philosophy
wise plan. lower drive seems to be a bit better with higher voltage... ;)Quote:
Originally Posted by MikalCarbine
Tibu,Quote:
Originally Posted by Tibu
Can you please post up a CPU-Z SPD Tables pic. I am curious to see if your sticks come up as PC4000.
My update: I installed the Ultra-D mobo tonight and I am still having problems with the ram. :mad:
Dom
Did a quick series of tests (sorry no screenies), but it seems that my set tops out in the mid 270's at 3-3-3-1T with ozzy's suggested timings. Not quite as high as the old balistix hand picked set I have, but a tad higher than i was able to get ocz's micron F's. At this point though the DFI Expert is holding my htt down. I'd like to try these on a venus board.
No screenies because frustration is taking over my senses. But semi-stable @ 265mhz 3-3-3-8 1T, onepagebook settings, 2.6 volts and active cooling. It still errors out in memtest. I am dissapointed to say the least. Someone please post up a CPU-Z screenie...
Dude 265 is pretty good for 2.6vQuote:
Originally Posted by dominick32
Hmmmm... WTF? I hadn't noticed this:Quote:
Originally Posted by dominick32
http://img.photobucket.com/albums/v4...onusspdpic.jpg
Every mem controller and memory sticks are different. You've got the hard work yourself. Try all the difference combinations of DS/DDS until you hit the jackpot. That's a good start.Quote:
Originally Posted by dominick32
You see!!Quote:
Originally Posted by Tibu
These new week 6 year 06 production sticks are all factory identified as PC3200. Thank you for verifying that information!! Finally somebody has the same sticks.. lol
Update #2 for tonight. I am halfway through SuperPi 8m @ 270 mhz 1T. The Ultra-D seems to be working hard for me tonight. :)
Dom
Holy crap my sticks say the exact same thing :eek:Quote:
Originally Posted by Tibu
I KNEW IT!!Quote:
Originally Posted by nn_step
I wasnt going crazy!!!!!!!!!! LOL :D
HahaQuote:
Originally Posted by dominick32
I am sort of worrying about these sticks now, I was hoping for a good 280-290, now I am praying the do at least 270 (like my old tracers did)
We shall see Wednesday..
Well, now I know that I have 3 brothers from the same week 6 production as me. How are we all averaging with these sticks as far as stability?
I am maxing out on 280 with 2.7v and I am going to see if it can do any better...
So what does that SPD thingie mean? Can the TEAm rep plz comment on this?
That is right.. It says PC4000 on the sticks why the hell isn't it saying that on the SPD?
UPDATE #3 for the night.
I have been playing around with the June 2005 bios of the Ultra-D and have been able to get a relatively stable config using Drive Strength/DDS @ 6/3
270 Mhz @ 1T 3-3-3-8, 2.7 volts, onepagebook settings
http://www.strippoli.com/270.JPG
Dont worry about the low 8m benchmark, I am using a 7X multiplier on a 12X 4800+ CPU
not really... both OPB and myself have found that odd (weak) drives are best for these micron chips ;)Quote:
Originally Posted by dominick32
i also wouldn't worry a whole lot about the spd. they still have the same chips, no? :p:
Thats a good question. Do you think anyone is willing to take the heatspreaders off on the week 6 sticks? lolQuote:
Originally Posted by ozzimark
For my sticks, as soon as I changed DS/DDS to 6/3 I was able to get some stability in 270.
PS- What do you recommend for DS and DDS settings?
I am trying to get 280 now but get BSOD memory dump upon xp load.
Thanks for the help!
Dom
as was said earlier, level 5 worked best for drive in my rig... data drive seems to be memory controller dependant, but 1 has a slight edge over the other 3 options ;)
also, micron chips are very distinctive from the side, you'll be able to see the little "bites" without a problem.
Thanks Ozz. However, you do have the earlier production 2005 sticks correct?Quote:
Originally Posted by ozzimark
Dom
Bad thing is my opty only gives me 2.7 somewhat stable, max 2880 but she nowhere near stable prime, I can do 3d and all that which is all I want
Can also super pi at 2880 ... 29.50sec :) per core
that could be RD forget to type the field of "memory name and initial spped changed to ddr500.Quote:
Originally Posted by Tibu
no harm at all.:p:
hey sorry about that bro,
that Name doesn't do anything though,
but hey I do serious apology about that,
if you wanna reprogram that, let me know
but basically it surely doesn't mater