4.8 on a 920D rocks big men ! whow
What are you using for cooling it @ 4.8 ?
What is you mobo and bios ?
And can you post your bios settings ?!
My 920D @ 1,475 only is stable at 4.22 (fsb 301). :(
Printable View
4.8 on a 920D rocks big men ! whow
What are you using for cooling it @ 4.8 ?
What is you mobo and bios ?
And can you post your bios settings ?!
My 920D @ 1,475 only is stable at 4.22 (fsb 301). :(
i didnt try out that much bios settings.
cooling is thermaltake golden orb... but it :censored: :stick: ..i would prefer a sonictower+2x120mm fans :>
mobo is an asus p5wd2 premium without any mods (so far).
Which BIOS are you on? 14, 15 or 16? :)Quote:
Originally Posted by Hazzan
still on vapo-ls, :rolleyes: found my psu is not enough,dual12+ only 18A each,stock my at 1.6Xv.
CD 356 3.33@5.8G pi-32m 20'23"
http://pix7.com/out.php/i2038_5.832m.gif
sreen shot 6.2Ghz!:banana:
http://pix7.com/out.php/i2037_6.2.gif
These new Preslers are Just NICE!
My Pentium D 940 will run 3D01 at 5524 Mhz under Dry Ice:
http://service.futuremark.com/compare?2k1=8933834
all others run stable at 5493 Mhz..
now I know the Tweaking tricks for my X1900XTX, time to do some heavy duty runs :woot:
I use Bios V 16 vith Vdim mod 2,43volt !! good luck ManQuote:
Originally Posted by TWY
Very nice! :up:Quote:
Originally Posted by hag6br
This is were I stand at the moment:
screenie
I know it's a superpi screen, but it's just for showing how far I could get it.
Setup:
Intel D940
P5WD2-E (which is always showing different Vcore readouts, so don't mention it)
1Gb OCZ PC2 6400 EB PE
I'm using watercooling atm, but the vapo is waiting behind the door. (literaly)
Is this any good so far?
/edit
Vcore in bios is set to 1.45V, Vdimm to 2.25V, MCH voltage is untouched because the motherboard has problems going over 300Mhz :( (it doesn't need more V under 300Mhz FSB)
First 3Dmark03 run with my 641, but still using old X800 XT vga, however no.2 on the Xtreme 3D team for X800 XT cards and this with only mild software overclock on vga (550/523).
Goes to show Cpu power can still push the show along...:fact: I don't feel comfortable benching higher at the moment with passive cooled NB...
Problem is score can't be published on the ORB, Futuremark still have not approved new cat.6.3 drivers...:mad:
http://img85.imageshack.us/img85/812...47mhz234nx.jpg
Getting X1900XTX in a week or so... :D
well done man and crazzy mem clock you got there :DQuote:
Originally Posted by IluvIntel
Thanks PcCI2iminal, I'm still not sure how high with only 2.3V, these 8000UL's will clock with tight as possible timings... I'm too busy doing other things with PC to do serious Memtest running. One things for sure though, I'll be installing my swiftech NB cooler this weekend....So more higher benchies too come. :banana:Quote:
Originally Posted by PcCI2iminal
i still searching for 8000UL in JP and no where to find,can you bench fsb @ 350 3-2-2-4?Quote:
Originally Posted by IluvIntel
pics needed :DQuote:
One things for sure though, I'll be installing my swiftech NB cooler this weekend....So more higher benchies too come.
now i see,you are using an Asus Premium
and for overclocking
Premium i955X>GA-G1975X?
Nice result m8.
It will arrive at my place tomorrow ...
Asus P5WD2-E Premium 975X
Mushkin DDR2 XP2-5300 2GB Kit 3-3-3-10
Intel P4 930 3.0Ghz (Dual Core)
I will make the mod's to the board test it on air (stock cooled) and then put the prommy on the system...
Let's see .... ;)
With P5WD2-E Prem and OCZ 5400EB.....
http://img91.imageshack.us/img91/852/intel95032yv.jpg
Hi, today is arrived my D920.
It's a SL94S (MALAY), FPO L550A922, PACKDATE 02/10/06.
Is it a good stepping?
I can't test it because I'm waiting for the rest of my new config. ( Liberty 620W and WD2-E Premium).
bye!
P.S. Sorry for my english, I'm from switzerland :)
all air
Winfast Extreme + Cedarmill 631 @ 4900-5000mhz :D
http://img306.imageshack.us/img306/1...03260309ah.jpg
http://img306.imageshack.us/img306/7...05110000ou.jpg
http://i28.photobucket.com/albums/c2...x7900gddr3.jpg
and my new baby for benching
http://img82.imageshack.us/img82/9470/zippy6005ax.jpg
http://img82.imageshack.us/img82/695/zippy60046a4et.jpg
NIce work criminal :) (Y)
Criminal, your vmod is @ ?volt ?
no vmods on that P5W
max fsb @ 348
I was refearing to the 7900gt vgpu mod !
no mods yetQuote:
Originally Posted by jVIDIA
max g71 @ 727mhz
max gdd3 @ 1960mhz
with stock cooling
room temps @ 18C
This is on a really small water chiller, loaded cpu temps were around 27c. I'll put it on a SS direct die next week. The gpu is on stock cooling.
950 Presler ES
Asus P5WD2
Saphire X1900XTX
OCZ PC5400EB 2X512
http://img52.imageshack.us/img52/7678/253510be.jpg
http://img54.imageshack.us/img54/3141/12832050xc.jpg
http://img372.imageshack.us/img372/5776/123kaqua9yu.jpg
http://img124.imageshack.us/img124/4117/8259pc058xh.jpg
Cpu temp at the end of the PCmark run was 57c :eek: it just destroyed my chiller... which was really only supposed to be a gpu cooler anyway;)
SuperPi_mod1.5 - 32Mb run
I notice if I put Vcore on 1.5v System sometimes does not want to boot...:stick: but at 1.48v ok to boot, Ai-Booster in windows to do the rest...:) This hapens no mater what Fsb:Ram ratio, using 0606 bios
http://img100.imageshack.us/img100/3...332mbrun0d.jpg
8Mb run
http://img86.imageshack.us/img86/592...38mbrun3ux.jpg
Cinebench95
http://img95.imageshack.us/img95/17/...94mhz231ht.jpg
:)
Wow some of these systems are just jaw dropping. I guess the site name isnt just a name, its exactly what some of you guys have.
Maybe its time to just get a Presler and can the smithy.