No Windows will install drivers itself. Check dfi-street.com for mobo and BIOS info.Quote:
Originally Posted by DarthOverlord
Printable View
No Windows will install drivers itself. Check dfi-street.com for mobo and BIOS info.Quote:
Originally Posted by DarthOverlord
Quote:
Originally Posted by QettoE
My bios is up to date and all the mobo drivers are set. I hope it was just an affinity issue. This is obviously my 1st dual core, so I am rather n00by.
Thanks for the info. Sounds like the 0534SPMW arnt so bad.Quote:
Originally Posted by QettoE
well my 175 opty landed today CCBWE 0536XPMW - hope to have it in soon but only on NF3 ATM as awaiting release off A8N32
Yeah, i hope if my 170 is a 0534SPMW that it can at least do 2.8ghz, then i'd be happy. I guess i'll find out when i get home from work what i got, but i am really hoping for a 0530; but who isn't :)Quote:
Originally Posted by Blue078
Were did you order from?Quote:
Originally Posted by Diverge
I ordered from Monarch, 170 oem - on saturday just before the price increase. I just checked my tacking number and Fedex didn't leave my package.. guess i will have to fill out the dumb card when i get home and wait for tomorrow :(Quote:
Originally Posted by Blue078
You will have to go and pick it up or wait for the FedEx guy. They will coss out the sig panel.Quote:
Originally Posted by Diverge
my 165 will be here today assuming a stupid address problem that is supposed to be fixed dont cause any problems. what seems to be the better steppind on these boys. ill let you know as soon as it gets here what it is,
HOLY COW!! fedex came a day early! CCBWE 0530TPMW! i'm off to install it, thank you mwave.
Changed the topic title from "Unofficial Dual Core..." to "Official Dual Core....".
2.4ghz at stock voltage, passed 2 instances of superpi 8m, one on each core. i will post a screen shot when i increase speed.
Good luck. Keep us updated.Quote:
Originally Posted by shiznit93
2.6ghz @ stock volts
http://img286.imageshack.us/img286/9...tled0rz.th.jpg
my X2 3800 needed 1.55v to do this.
well i got my 165 today stepping is CCBWE 0534 SPMW. i dont got time to play right now time for work but i will test later tonight. anyone know what the 0534's are clocking like?
Quote:
Originally Posted by Zeus...
HEY! Someone that finally has my stepping... I'm waiting for an A8N32 as well, but have not board to test in for the mean time... make sure to let us know!
Where did you get it? I got mine from some non-retail distributor in Toronto, Canada through Insight.ca...
Received two CCBWE 0534SPMW chips this week. Funny thing is I ordered them days apart yet they are consecutive serial numbers... 80 & 81.
First one does 2.7GHz@1.52v and the second does 2.68GHz@1.48v with Thermaltake Tower112 coolers. Not bad but I was hoping for more. ;)
http://www.komplett.co.uk/k/ki.asp?sku=313938&cks=SERQuote:
Originally Posted by phadeout
Running at std ATM 30 dregees idle and 40-42 load prime(x2) large ffts - had a little go overclocking with this 12month old Neo2, AS5 hadnt been on it for an hour and didnt take the Vcore above 1.4 so didn't get stability easy - (wouldnt boot into windows) and couldn't be bothered to run memtest86 and declock the multi play with the Vcore etc as will be going for new mobo when its out - seems a waste of time when I can be gaming etc
2.7ghz @ stock volts, max load temp was 41C.
http://img52.imageshack.us/img52/193/o1700ly.th.jpg
this is starting to remind me of my celeron 300a.
nice one shiz
Nice results. Our chips perform almost exaclty the same.Quote:
Originally Posted by shiznit93
Damnit, i just got that stepping today on a 165... Hopefully i can go higher than you on H20. :slapass:Quote:
Originally Posted by Jeff
175 0530TPMW coming today or tomorrow, wish me luck :toast:
I'll post results if they're good... if they're bad, then... :confused:
2.8ghz @ 1.344v (1.375 in bios), max load temp 44C
http://img252.imageshack.us/img252/2729/283iw.th.jpg
Oh that is sweeet :) Nice Chip :woot:Quote:
Originally Posted by shiznit93
Was it OEM or Retail ?