Offcourse :) You have my permission.Quote:
Originally Posted by wander_jarra
Printable View
Offcourse :) You have my permission.Quote:
Originally Posted by wander_jarra
kakaroto,
Many thanks to you & other's in this thread. It was of great help getting my corsair's 600ddr stable. Now do you have some advice on venus cores with G. Skill week 440 LE's or Geil One S series. I cannot get either to run ddr 600 stable @ any stock, rated, or loose timmings. Since I started, now I can't get the corsairs back to 600 DDR stable either. I was using the 510-1fix then switch to 623-3 then 704ta. Nothing works Help please.:confused:
Another question if my geils say week 24 year 05 how does that translate. Week 524?
What are your full memory settings (BIOS)?Quote:
Originally Posted by The Nemesis
why are my G.Skill PC4800FF soooo gay
can't get them stable with 2.5-3-3-6 1T past 260-263MHz
i can get it up to 310MHz 2.5-4-3-7 1T ..........
i can almost memtest up to 300MHz with 2.5-3-3-6 1T but just no go in windows....you'd think i'd be able to get stock speeds of 275 at least......and with my LE sticks highest memtest stable is just over 10MHz less for windows but not these FF sticks :slapass:
here is a couple of screenshots of 2.5-4-3-7 1T to give you an idea what timings i'm using
300MHz 2.5-4-4-8 1T 32M SuperPI
http://img291.imageshack.us/img291/6...i32m0iy.th.jpg
300MHz 2.5-4-3-7 1T 32M SuperPI
http://img124.imageshack.us/img124/5...i32m0yf.th.jpg
310MHz 2.5-4-3-7 1T SuperPI 8M
http://img128.imageshack.us/img128/8...i32m4xk.th.jpg
note that these FF sticks are the ones with heatspreaders so i don't know which week they are...........i can tell you that they respond well to volts as i gain stability and MHz with more volts...............also in memtest at 300MHz 2.5-3-3-6 1T first loop#5 pass @2.7v gives me 1500 erros; @2.8v 350 errors; @2.9v 6 errors...........i tried these settings with 282MHz on RAM in windows and error spits out in windows on first 32M pass = gay..........it's heart breaking when you see all the initial tests at 300MHz no probs...i hate getting excited over cherry picked RAM :mad:
superpi under 5minutes?? EDIT: just noticed that was 8M. hehe
im trying to get my 1GBFF's stable as well, Tried to push DDR620 but it still would give me bsod's or gaming crashes. I'll settle for DDR600 now with my 3200Venice...maybe get an Opty so I can cook at 300x10 instead of 300x8.
i wouldn't palm off the Venice too quick if it is just the memory you are thinking of......I had great experience with most if not all Venice CPUs I've had......really good for max RAM clocks....Opterons are a bit trickier
i think the key for my sticks was TREF=3120;TRTW=Auto(4 in windows); Drv/data Strenght=Auto(Normal in windows); Idle Cycle Limit=256; MAL=8;RP=5
gets really upset if i touch a different TREF,TRTW,Idle Cycle Limit or lower MAL
for 310 i needed more volts and bios selected weak drive strength.......i am yet to play with all of the data/Drive strengths and see which one is best for these
it would be nice to bring down TRTW=2 and most importantly better results with bloody TRCD=3.....at least 290 common you damn RAM you heheheheheh
Dinos22: How does your memory react on 275Mhz 2.5-3-3-7 with 2.7v? If it does not want to be stable at these settings, then the memory does not like the TRP and TRCD @3, maybe you should RMA them.
What is the serial number of you FF? maybe i can say what chips they have.
hi mateQuote:
Originally Posted by kakaroto
it basically throws an error right away
i would give you the serial number but it rubbed off as it was used with phase change so those labels are just blank with a little bit of ink at the end :( :( :( :(
Kakaroto What do you think about TCCD burning? For example BH5 usually increase MAX frequency limit after burning! :)
i tried that a while back with Corsair TCCD and found it was a waste of time
http://i4memory.com/showthread.php?t=522
You always can burn your memory, only you need to watch the Vddr. 2.7~2.8v is max for most TCCD.Quote:
Originally Posted by Monster
But burning TCCD has less effect then BH-5.
I can't understand what was it but yesterday I tried to pass goldmemory 6.64 (THE HUGE trouble for my kit :)). I set 3-4-4-8-1T and Vddr=2.72V. I got many 00C1 errors... Trwt = 2. BUT then I set 3-4-4-8-1T and Vddr=2.69V and Trwt=3 and the GM 6.64 was passed successfully! Bandwidth is equal for both 2.5-3-3-6 and 3-4-4-8 = 7500/7400 (Sandra 2005 Pro SP3). I think the biggest trouble for my kit now is overheating (there is no blowing fans on it :(). I'm looking for guys could cut through my tower side the window for plex with 2x120mm fan! :) 1st fan should blow onto my TCCD's heatsinks, but 2nd - onto videomemories heatsinks... ;)
I just wanna get 600MHz @ 2.5-4-3-7-1T ROCK stable! ;)Quote:
But burning TCCD has less effect then BH-5.
So my venice should be able to do 300mhz. I'd like to get 310 so I can get max ram and cpu but I cant seem to get it stable. If I cannot get stable by next monday I'm RMAing the ram.
When did you get your sticks? I got mine end of October and my serials are 0510000342/0510000343. Still trying different settings before I RMA. Once I get windows memtest stable, It will crash while gaming..even while my cpu's max is at 2480mhz I ran 300*8 and it crashed.
This sucks :(
I run my TCCD @ DDR500 2,5-3-3-7 but I need 2.85v for stability...is thar a problem?!
I get DDR600 3dMark06 stable (3-4-4-8) but it's not stable for prime or superpi and I'm afraid to raise the voltages.
Im have the same problem. I can't get my G.Skill LE's stable at anything above 250 2.5-3-3-7-1T 1:1.Quote:
Originally Posted by The Nemesis
Here is my setup:
Motherboard: Lanparty Ultra-D
BIOS: 623-1
CPU: Opteron 146 0536GPMW
OS: Windows XP Home w/SP2
RAM: G.Skill PC4400 LE (TCCD) Orange Dimms
PSU: OCZ Powerstream 520W
DRAM Timings:
- 200 1:1
CPC ENABLED
Tcl 2.5
Trcd 03
Tras 06
Trp 03
Trc 12
Trfc 15
Trrd 03
Twr 02
Twtr 02
Trwt 03
Tref 3120
Twcl 01
Bank Inter EN
Skew Control Auto
Skew Value 0
DRAM Drive Strength 07
DRAM Data Drive Strength 02
Max Async 7ns
Read Preamble 5ns
Idle Cycle 256
Dynamic Counter ENA
R/W Que Bypass 16X
Bypass Max 7X
32 Bit Gran DIS
Voltages:
- HTT 260
LDT X3
Cpu Multi 10x
Vcore 1.45v
LDT 1.2v
Chipset 1.5v
Vdimm 2.7v
Prime fails instantly when using these settings.
My Opty is stable at 270x10 with 1.4v running a divider. Any help getting these stable at least at stock (2.5-3-3-7-1T 275HTT) would be appreciated :D.
Hi, im going for DDR600 Fully Stable with My Mushkin XP4400
(TCCD)
And i can run Memtest Test #5 10 times without errors... but in test #8 Errors apear (3 or 4 errors whole test)
I can boot into Windows But i cant even run SP1MB
http://img129.imageshack.us/img129/985/ddr6006qd.th.jpg
@ ~2,9v
That is my timming configuration..
Can you help me getting DDR600 Fully Stable.. Im kinda Noob with A64 (first rig)
using DFI Expert with last bios... memory has active cooling...
dinos, my FF pair wont even do 300MHz 2.5-4-4-8 1T 32M SuperPI with same settings as your pic. RMA'ing them tomorrow.
you have to spend more time tweaking.......i couldn't get any speed stable for a week....any speed...until i figured it out with some help from eva2000Quote:
Originally Posted by Modulok
@kakaroto: are my chances of RMA slim/existant/non-existant if serial# label is not showing :confused:
well i have been tweaking for over a month, gs tech has tried to help and it wont be stable. i would think, and hope, with stock settings it would be stable, its not.
hopefully my rma pair will be better.
oh man that's no good.....1 month and no results would be frustratingQuote:
Originally Posted by Modulok
it took mea few weeks and plenty of back and forth with Anthony over at G.Skill forum a while back to RMA my first kit of LE's as they just would not run 275MHz.........i was able to get it up to 271 with a looooooooot of tweaking but just couldn't go past
the new set i got i slapped it straight in at 275 and it was fine out of the box....so yeah it really shouldn't be that hard to get it stable at stock i reckon
Kakaroto will post a new Guide how to get your TCCD at DDR600 2.5-3-3-7 with 24/7 stability. Please watch the bandwidth section closely.Quote:
Originally Posted by DeToNaToR.cl
G.S EUTech,
I have read your previous posts and if your serial is faded it is still RMA worthy. What matters is that the warranty sticker is not removed.Quote:
Originally Posted by dinos22
G.S EUTech,
thank you for letting me know :toast:Quote:
Originally Posted by G.S EUTech
kakaroto Could you please tell me what I have to change to make my kit works as DDR600?
It is my settings:
http://img207.imageshack.us/img207/7...r6003ss.th.gif
Please read this guide I just post: http://xtremesystems.org/forums/showthread.php?t=89492Quote:
Originally Posted by Monster
The usage of a specific voltage is important, what datecode TCCD are you using?