i remember seeing a post on dfi street that on the nf4 boards pcie should be set to 105 instead of 100 for radeons .. anyone doing that does it get better performance?
edit: now finally past 13k in 03 aswell link
Printable View
i remember seeing a post on dfi street that on the nf4 boards pcie should be set to 105 instead of 100 for radeons .. anyone doing that does it get better performance?
edit: now finally past 13k in 03 aswell link
Hi
ok... 503 MHz / 621 MHz seems to be the max. of My X800XL.
I did ALL the Vmods but I can´t run over ~500 GPU FSB.
Score: 13597 ;)
http://service.futuremark.com/compare?2k3=3867855
cu fire113
a question between all the overclocking;
Do you guys also have troubles installing the new catalyst 5.4s ? If i try to install them (with CCC or without it) the setup hangs when installing the WDM devices. I have had the same problem with the 5.3s.
5.2s are working like a charm. I tried to install them on a fresh WinXP SP2 install (reinstalled tonight). Upgrading to 5.4 with 5.2 installed with skipping the WDM drivers results in a 640x480 16 color screen after rebooting :(
Can't seem to solve it.
id wait to install and see if theres any performance gains with the new cats.. if the old ones work well for you why change
Well installed Win2k, didnt get much gain over my XP scores, but I did atleast break 34k...
http://service.futuremark.com/compare?2k1=8521670
excellent score congrats , ive just barely broke 30k
hi
here are my scores:
:toast:
05,03,01:
http://service.futuremark.com/compare?3dm05=752125
http://service.futuremark.com/compare?2k3=3876533
http://service.futuremark.com/compare?2k1=8522235
did any of you notice higher scores with lower temps? (as far as running the same config!) i think that the VPU is throttling! :rolleyes:
http://service.futuremark.com/servle...projectType=12
My '05 scores.
And the screenshot
Pretty good with a barton and stock cooling
Ok its not a X800XL but here my score :D
http://service.futuremark.com/compare?2k1=8523341
2003 = 11,5k (550/550)
2005 = 4,9k (450/550)
It is a X800 with 12 pipelines :stick:
anybody tried SAPPHIRE ATI RADEON X800XL, 256MB GDDR3, AGP 8X, TV-OUT, DVI, VIVO yet???
benchies
Yep, see my earlier post 5508 in '05 475/594 vgpu 1.55V vdd 2.1V vddq 2.2VQuote:
Originally Posted by CHEMICAL
Stable at 470/590 all numbers with stock cooling 37C idle 65C under load
http://service.futuremark.com/servle...projectType=10
I was able to get 03 to run at higher speeds
nice what are the stock clocks on it??
aquamark
3dmark01
system specs??
Not even a please? :rolleyes: Read previous posts more carefully next time.Quote:
Originally Posted by CHEMICAL
system specs in his previous post:
-Athlon XP-M @ 2400MHz
-stock cooling
X800 XL stock clocks:
-core speed: 400MHz
-memory speed: 490MHz (980MHz DDR)
You're welcome.
Linky no worky.;) Just got my rig up and running but i'm having a problem installing 3dmark2k1. Anybody know what this means? I installed 03 & 05 fine.Quote:
Originally Posted by evilentity
:confused:
I've had crap like that happen before. Right now everything hates my computer so I just happen to remember a possible solution:Quote:
Originally Posted by Smokin_Joe
Open the Run window and type services.msc. If the Windows Installer service is not started, start it and that should fix it. It it's already started, then I don't know what's wrong. :/
Well it wasn't started but i started it and it still won't install and same message. I've updated windows till it can't be updated no more :p: and it still won't install. IDK :confused: Here's my first run with the XL at 400/1000 , for some reason i couldn't publish it. The orb kept saying my slots were full but i have 2 left.Quote:
Originally Posted by mcnbns
:confused: What is goin on tonite? :coffee:
Anyone noticed, or confirmed if the lack of aditional power connector on the Sapphire like X800XL are keeping their owners from getting higher clocks or something?
4 sure its NOT thorttling check that with rivatunerQuote:
Originally Posted by naelq
maybe, but i think vmods and cooling gains u alot moa cause PCI-E Slots can support enough voltageQuote:
Originally Posted by Always
seEn
my connect 3d does 470 core 600 mem without vmods or power connector
XP-M 2500+ @2.4 (12x200)Quote:
Originally Posted by CHEMICAL
Asrock K7Upgrade880 (volt-modded to give 1.75V to cpu)
2x512Mb Mushkin green line 200Mhz 2.5-4-4-8
edit:
Sorry, I forgot to add that I'm using catalyst 5.4's
Aquamark score in screenshot
3dmark01- edit: in screenshot (478/602)
And yes, the rest of my system does suck ass. Fortunately, a K8N Neo2 platinum and 3000+ venice are in my near future plans.
EDIT:
For those of you looking for how much it increased over stock:
max overclock: speed(percent increase) 478(19.5%)/594(21.2)
3dmark05(percent increase) 5526(16.0%)
stable overclock 470(17.5)/589(20.2)
5459(14.6%)
stock score 4763
478/594 wasn't stable for gaming, but it did increase the score by 1.2% over the stable overclock. Core increased by 1.7%, mem by .85%
It seems to scale very well, if you can get it to overclock well.
EDIT
The card seems to be burning in now
477/597 is benchable, and I hit 5567 in 05
470/594 is stable for gaming with a score of 5482
I don't have any new screenies but new scores are in my sig. :) Oh and finally got 01 to install, it was a dumb service. :p:
MSI K8N NEO2s make baby Jesus cry :slapass: Get that sucker on a DFI :slap: :stick:Quote:
Originally Posted by evilentity
And how would that work? DFI doesn't have an nforce3 socket 939 board.Quote:
Originally Posted by nOx34